ATIS 1000634-1993 Frame Relaying Service Specific Convergence Sublayer (FR-SSCS).pdf

1、 AMERICAN NATIONAL STANDARD FOR TELECOMMUNICATIONS ATIS-1000634.1993(R2011) Frame Relaying Service Specific Convergence Sublayer (FR-SSCS) ATIS is the leading technical planning and standards development organization committed to the rapid development of global, market-driven standards for the infor

2、mation, entertainment and communications industry. More than 250 companies actively formulate standards in ATIS 18 Committees, covering issues including: IPTV, Service Oriented Networks, Energy Efficiency, IP-Based and Wireless Technologies, Quality of Service, and Billing and Operational Support. I

3、n addition, numerous Incubators, Focus and Exploratory Groups address emerging industry priorities including “Green”, IP Downloadable Security, Next Generation Carrier Interconnect, IPv6 and Convergence. ATIS is the North American Organizational Partner for the 3rd Generation Partnership Project (3G

4、PP), a member and major U.S. contributor to the International Telecommunication Union (ITU) Radio and Telecommunications Sectors, and a member of the Inter-American Telecommunication Commission (CITEL). For more information, please visit . AMERICAN NATIONAL STANDARD Approval of an American National

5、Standard requires review by ANSI that the requirements for due process, consensus, and other criteria for approval have been met by the standards developer. Consensus is established when, in the judgment of the ANSI Board of Standards Review, substantial agreement has been reached by directly and ma

6、terially affected interests. Substantial agreement means much more than a simple majority, but not necessarily unanimity. Consensus requires that all views and objections be considered, and that a concerted effort be made towards their resolution. The use of American National Standards is completely

7、 voluntary; their existence does not in any respect preclude anyone, whether he has approved the standards or not, from manufacturing, marketing, purchasing, or using products, processes, or procedures not conforming to the standards. The American National Standards Institute does not develop standa

8、rds and will in no circumstances give an interpretation of any American National Standard. Moreover, no person shall have the right or authority to issue an interpretation of an American National Standard in the name of the American National Standards Institute. Requests for interpretations should b

9、e addressed to the secretariat or sponsor whose name appears on the title page of this standard. CAUTION NOTICE: This American National Standard may be revised or withdrawn at any time. The procedures of the American National Standards Institute require that action be taken periodically to reaffirm,

10、 revise, or withdraw this standard. Purchasers of American National Standards may receive current information on all standards by calling or writing the American National Standards Institute. Notice of Disclaimer & Limitation of Liability The information provided in this document is directed solely

11、to professionals who have the appropriate degree of experience to understand and interpret its contents in accordance with generally accepted engineering or other professional standards and applicable regulations. No recommendation as to products or vendors is made or should be implied. NO REPRESENT

12、ATION OR WARRANTY IS MADE THAT THE INFORMATION IS TECHNICALLY ACCURATE OR SUFFICIENT OR CONFORMS TO ANY STATUTE, GOVERNMENTAL RULE OR REGULATION, AND FURTHER, NO REPRESENTATION OR WARRANTY IS MADE OF MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE OR AGAINST INFRINGEMENT OF INTELLECTUAL PROPER

13、TY RIGHTS. ATIS SHALL NOT BE LIABLE, BEYOND THE AMOUNT OF ANY SUM RECEIVED IN PAYMENT BY ATIS FOR THIS DOCUMENT, WITH RESPECT TO ANY CLAIM, AND IN NO EVENT SHALL ATIS BE LIABLE FOR LOST PROFITS OR OTHER INCIDENTAL OR CONSEQUENTIAL DAMAGES. ATIS EXPRESSLY ADVISES ANY AND ALL USE OF OR RELIANCE UPON T

14、HIS INFORMATION PROVIDED IN THIS DOCUMENT IS AT THE RISK OF THE USER. NOTE - The users attention is called to the possibility that compliance with this standard may require use of an invention covered by patent rights. By publication of this standard, no position is taken with respect to whether use

15、 of an invention covered by patent rights will be required, and if any such use is required no position is taken regarding the validity of this claim or any patent rights in connection therewith. ATIS-1000634.1993(R2011), Frame Relaying Service Specific Convergence Sublayer (FR-SSCS) Is an American

16、National Standard developed by the ATIS Packet Technologies and Systems Committee (PTSC). Published by Alliance for Telecommunications Industry Solutions 1200 G Street, NW, Suite 500 Washington, DC 20005 Copyright 2011 by Alliance for Telecommunications Industry Solutions All rights reserved. No par

17、t of this publication may be reproduced in any form, in an electronic retrieval system or otherwise, without the prior written permission of the publisher. For information contact ATIS at 202.628.6380. ATIS is online at . Printed in the United States of America. American National StandardANSI T1.634

18、-1993for telecommunications frame relaying service specificconvergence sublayer (FR-SSCS)Approved November 18, 1993 Secretariat: Alliance for Telecommunications Industry SolutionsAn American National Standard implies a consensus of those substantially concerned with its scope and provisions. An Amer

19、icanNational Standard is intended as a guide to aid the manufacturer, the consumer, and the general public. The existence of anAmerican National Standard does not in any respect preclude anyone, whether he has approved the standard or not, from manufac-turing, marketing, purchasing, or using product

20、s, processes, or procedures not conforming to the standard. American NationalStandards are subject to periodic review and users are cautioned to obtain the latest editions.The American National Standards Institute does not develop standards and will in no circumstances give an interpretation of anyA

21、merican National Standard. Moreover, no person shall have the right or authority to issue an interpretation of an American NationalStandard in the name of the American National Standards Institute.CAUTION NOTICE: This American National Standard may be revised or withdrawn at any time. The procedures

22、 of the AmericanNational Standards Institute require that action be taken to reaffirm, revise, or withdraw this standard no later than five years from thedate of approval. Purchasers of American National Standards may receive current information on all standards by calling or writingthe American Nat

23、ional Standards Institute.Copyright 1993 by Alliance for Telecommunications Industry Solutions, 1200 G Street, NW, Suite 500, Washington, DC, 20005 ANSI2.5C1293/121 Scope, purpose, and field of appli-cationThis standard is identical to ITU-T Recom-mendation I.365.1, Frame relaying service spe-cific

24、convergence sublayer (FR-SSCS), from theInternational Telecommunication Union.This standard specifies the Frame RelayingService Specific Convergence Sublayer (FR-SSCS). The FR-SSCS is located in the upperpart of the ATM Adaptation Layer on top of theCommon Part Convergence Sublayer (CPCS) ofAAL type

25、 5, as specified in ITU-T (formerlyCCITT) Recommendation I.363, section 6. TheFR-SSCS is used at the B-ISDN TE to emulatethe Frame Relaying Bearer Service (FRBS) inB-ISDN. It is also used for interworking betweena B-ISDN and a Frame Relaying Network.2 Normative referencesThe following standards cont

26、ain provisionswhich, through reference in this text, consti-tute provisions of this American NationalStandard. At the time of publication, the edi-tions indicated were valid. All standards aresubject to revision, and parties to agreementsbased on this American National Standardare encouraged to inve

27、stigate the possibilityof applying the most recent editions of thestandards indicated below.CCITT Blue Book I.122 Recommendation,Framework for providing additional packetmode bearer service, ITU, Geneva, 19881)CCITT Recommendation I.233.1, Frame relaybearer services, 19911)CCITT Recommendation I.361

28、, ATM layer speci-fications, 19921)CCITT Recommendation I.370, Congestion man-agement in frame relaying networks, 19911)CCITT Recommendation I.372, Frame modebearer service network to network interfacerequirements, 19921)Page 1 of 2 pagesANSI T1.634-19931)Available from the American National Standar

29、ds Institute, 11 West 42nd Street, New York, NY 10036.BECN Backward Explicit CongestionNotificationB-ISDN Broadband Integrated ServicesDigital NetworkB-TE B-ISDN Terminal EquipmentCI Congestion IndicationC/R Command Response BitCPCS Common Part ConvergenceSublayerD/C Data or Control IndicationDE Dis

30、card EligibilityDLCI Data Link Connection IdentifierDL-CORE Data Link CoreEA Extended Address Field BitFECN Forward Explicit CongestionNotificationFCS Frame Check SequenceFMBS Frame Mode Bearer ServiceFR-SSCS Frame Relaying Service SpecificConvergence SublayerIWF InterWorking FunctionPDU Protocol Da

31、ta UnitSAR Segmentation and ReassemblySSCS Service Specific ConvergenceSublayerTE Terminal EquipmentVCI Virtual Channel IdentifierCCITT Recommendation Q.922, ISDN datalink layer specifications for frame mode bearerservices, 19911)CCITT Recommendation Q.933, DSS1 signal-ing specifications for frame m

32、ode basic callcontrol, ITU, Geneva, 19921)ITU-T (formerly CCITT), AAL Type 5,Recommendation text for I.363, section 3, 19931)ITU-T (formerly CCITT), RecommendationI.365.1, Frame relaying service specific con-vergence sublayer (FR-SSCS), 19931)ITU-T (formerly CCITT), RecommendationI.555, Frame relayi

33、ng bearer service inter-working, 19931)3 DefinitionsThe following terminology is used within thisdocument.International Telecommunication Union Telecommunication Standardization Sector(ITU-T): The ITU has been a specializedagency of the United Nations since 1948. Asthe oldest international treaty or

34、ganization, ittraces its formal beginning to 1865. ITU-Ttraces its formal beginning to 1954, when itspredecessor, the International Telegraph andTelephone Consultative Committee (CCITT)was founded for the purpose of promoting andensuring the operation of internationaltelecommunication systems.4 Abbreviations and acronymsAAL ATM Adaptation LayerATM Asynchronous Transfer ModePage 2 of 2 pagesANSI T1.634-1993