ATIS J-STD-036-C-2-2017 Enhanced Wireless 9-1-1 Phase II (Addendum to ANSI J-STD-036-C).pdf

1、J-STD-036-C-2(Addendum to ANSI/J-STD-036-C) June 2017 Enhanced Wireless 9-1-1 Phase II ANSI/J-STD-036-C-2-2017 APPROVED: JUNE 19, 2017 JOINT STANDARDS Joint Standards and Publications are adopted in accordance with the American National Standards Institute (ANSI) patent policy. By such action, the T

2、elecommunications Industry Association (TIA) or the Alliance for Telecommunications Industry Solutions (ATIS) does not assume any liability to any patent owner, nor does it assume any obligation whatever to parties adopting the Standard or Publication. This Standard does not purport to address all s

3、afety problems associated with its use or all applicable regulatory requirements. It is the responsibility of the user of this Standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations before its use. This standard was developed under

4、Project No. ANSI/TIA-PN-036-C-2-R1, formulated under the cognizance of the TIA TR-45.8 Subcommittee on Core Networks and ATIS Wireless Technologies and Systems Committee (WTSC) and Emergency Services Interconnection Forum (ESIF). Published by TELECOMMUNICATIONS INDUSTRY ASSOCIATION Technology Teleph

5、one (703)907-7700; Fax: (703)907-7727 or by email to standardstiaonline.org. This document was coordinated between ATIS and TIA. A Word from TIA: TIA Engineering Standards and Publications are designed to serve the public interest through eliminating misunderstanding between manufacturers and purcha

6、sers, facilitating interchangeability and improvement of products, and assisting the purchaser in selecting and obtaining with minimum delay the proper product for his/her particular need. Existence of such Standards and Publications shall not be in any respect preclude any member or nonmember of TI

7、A from manufacturing or selling products not conforming to such Standards and Publications, nor shall the existence of such Standards and Publications preclude their voluntary use by those other than TIA members, whether the standard is to be used either domestically or internationally. TIA Document

8、s contain information deemed to be of technical value to the industry, and are published at the request of the originating Committee without necessarily following the rigorous public review and resolution of comments which is a procedural part of the development of a American National Standard (ANS)

9、. Further details of the development process are available in the TIA Procedures for American National Standards and TIA Engineering Committee Operating Procedures, located at http:/www.tiaonline.org/standards/standards/ec-procedures. A Word from ATIS: As a leading technology and solutions developme

10、nt organization, ATIS brings together the top global ICT companies to advance the industrys most - pressing business priorities. Through ATIS committees and forums, nearly 200 member companies are working to address the all-IP transition, 5G, network functions virtualization, big data analytics, clo

11、ud services, device solutions, emergency services, M2M, cyber security, network evolution, quality of service, billing support, operations, and much more. These priorities follow a fast-track development lifecyclefrom design and innovation through standards, specifications, requirements, business us

12、e cases, software toolkits, open source solutions and interoperability testing. ATIS is accredited by the American National Standards Institute (ANSI). The organization is the North American Organizational Partner for the 3rd Generation Partnership Project (3GPP), a founding Partner of oneM2M global

13、 initiative, a member of the International Telecommunications Union (ITU) , as well as a member of the Inter-American Telecommunication Commission (CITEL). For more information, visit www.atis.org. NOTICE FROM PATENT HOLDERS The users attention is called to the possibility that compliance with this

14、standard may require use of an invention covered by patent rights. By publication of this standard, no position is taken with respect to the validity of this claim or of any patent rights in connection therewith. The patent holder has, however, filed a statement of willingness to grant a license und

15、er these rights on reasonable and nondiscriminatory terms and conditions to applicants desiring to obtain a license. Details may be obtained from the Telecommunications Industry Association, Alliance for Telecommunications Industry Solutions or the American National Standards Institute. Copyright Te

16、lecommunications Industry Association 2017 Copyright Alliance for Telecommunications Industry Solutions 2017 All rights reserved This document is subject to change. NOTICE OF COPYRIGHT This document is issued under a joint copyright by the Telecommunications Industry Association and the Alliance for

17、 Telecommunications Industry Solutions, and may not be reproduced without permission. Reproduction of these documents either in hard copy or soft copy (including posting on the web) is prohibited without copyright permission. For copyright permission to reproduce portions of this document, please co

18、ntact TIA Standards Department or go to the TIA website (www.tiaonline.org) for details on how to request permission. Details are located at: http:/www.tiaonline.org/about/faqDetail.cfm?id=18 Organizations may obtain permission to reproduce a limited number of copies by entering into a license agree

19、ment. For information, contact: Global Engineering Documents 15 Inverness Way East Englewood, CO 80112-5704 or call U.S.A. and Canada (1-800-854-7179) International (303) 397-7956 OR ATIS Document Center: (doccenteratis.org) -Alliance for Telecommunications Industry Solutions 1200 G Street, NW Suite

20、 500 Washington, DC 20005 (202)628-6380NOTICE OF DISCLAIMER AND LIABILITY The document to which this Notice is affixed (the “Document”) has been prepared by one or more Engineering Committees or Formulating Groups of the Telecommunications Industry Association (“TIA”). In addition, the Document was

21、balloted and approved by ATIS Wireless Technologies and Systems Committee and ATIS Emergency Services Interconnection Forum. TIA is not the author of the Document contents, but publishes and claims copyright to the Document pursuant to licenses and permission granted by the authors of the contents.

22、TIA Engineering Committees and Formulating Groups are expected to conduct their affairs in accordance with the TIA Procedures for American National Standards and TIA Engineering Committee Operating Procedures, the current and predecessor versions of which are available at http:/www.tiaonline.org/sta

23、ndards/ec-procedures. The ATIS Wireless Technologies and Systems Committee and Emergency Services Interconnection Forum are expected to conduct its affairs in accordance with the ATIS Operating Procedures which is available at http:/www.atis.org/legal. TIAs function is to administer the process, but

24、 not the content, of document preparation in accordance with the Manual and, when appropriate, the policies and procedures of the American National Standards Institute (“ANSI”). Likewise, ATIS function, and on behalf of its Committees and Forums, is to administer the process according to its Operati

25、ng Procedures, but not develop the content of the document. TIA and ATIS do not evaluate, test, verify or investigate the information, accuracy, soundness, or credibility of the contents of the Document. In publishing the Document, TIA and ATIS disclaim any undertaking to perform any duty owed to or

26、 for anyone. If the Document is identified or marked as a project number (PN) document, or as a standards proposal (SP) document, persons or parties reading or in any way interested in the Document are cautioned that: (a) the Document is a proposal; (b) there is no assurance that the Document will b

27、e approved by any Committee of TIA or any other body in its present or any other form; (c)null the Document may be amended, modified or changed in the standards development or any editing process.The use or practice of contents of this Document may involve the use of intellectual property rights (“I

28、PR”), including pending or issued patents, or copyrights, owned by one or more parties. Neither TIA nor ATIS makes any search or investigation for IPR. When IPR consisting of patents and published pending patent applications are claimed and called to TIAs attention, a statement from the holder there

29、of is requested, all in accordance with the Manual. When IPR consisting of patents are claimed and called to ATISs attention, a statement from the holder thereof is requested, all in accordance with the ATISs Operating Procedures. Neither TIA nor ATIS takes any position with reference to, and discla

30、ims any obligation to investigate or inquire into, the scope or validity of any claims of IPR. Neither TIA or ATIS will neither be a party to discussions of any licensing terms or conditions, which are instead left to the parties involved, nor will TIA or ATIS opine or judge whether proposed licensi

31、ng terms or conditions are reasonable or non-discriminatory. TIA does not warrant or represent that procedures or practices suggested or provided in the Manual have been complied with as respects the Document or its contents. TIA and ATIS do not enforce or monitor compliance with the contents of the

32、 Document. TIA and ATIS do not certify, inspect, test or otherwise investigate products, designs or services or any claims of compliance with the contents of the Document. ALL WARRANTIES, EXPRESS OR IMPLIED, ARE DISCLAIMED, INCLUDING WITHOUT LIMITATION, ANY AND ALL WARRANTIES CONCERNING THE ACCURACY

33、 OF THE CONTENTS, ITS FITNESS OR APPROPRIATENESS FOR A PARTICULAR PURPOSE OR USE, ITS MERCHANTABILITY AND ITS NON-INFRINGEMENT OF ANY THIRD PARTYS INTELLECTUAL PROPERTY RIGHTS. TIA AND ATIS EXPRESSLY DISCLAIM ANY AND ALL RESPONSIBILITIES FOR THE ACCURACY OF THE CONTENTS AND MAKE NO REPRESENTATIONS O

34、R WARRANTIES REGARDING THE CONTENTS COMPLIANCE WITH ANY APPLICABLE STATUTE, RULE OR REGULATION, OR THE SAFETY OR HEALTH EFFECTS OF THE CONTENTS OR ANY PRODUCT OR SERVICE REFERRED TO IN THE DOCUMENT OR PRODUCED OR RENDERED TO COMPLY WITH THE CONTENTS. NEITHER TIA NOR ATIS SHALL BE LIABLE FOR ANY AND

35、ALL DAMAGES, DIRECT OR INDIRECT, ARISING FROM OR RELATING TO ANY USE OF THE CONTENTS CONTAINED HEREIN, INCLUDING WITHOUT LIMITATION ANY AND ALL INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF BUSINESS, LOSS OF PROFITS, LITIGATION, OR THE LIKE), WHETHER BASED UPO

36、N BREACH OF CONTRACT, BREACH OF WARRANTY, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE FOREGOING NEGATION OF DAMAGES IS A FUNDAMENTAL ELEMENT OF THE USE OF THE CONTENTS HEREOF, AND THESE CONTENTS WOULD NOT BE PUBLISHED BY TIA WI

37、THOUT SUCH LIMITATIONS.Enhanced Wireless 9-1-1 Phase IIRevision HistoryCopyright 2017 by Alliance for Telecommunications Industry Solutions and Telecommunications In-dustry Association.All rights reserved.This document is subject to change.Revision Date RemarksRev. 0 August 2000 Initial publicationR

38、ev. 0 Addendum 1 December 2000 First addendumRev. A March 2002 Publication of Revision ARev. A Addendum 1 March 2003 Addendum to Revision ARev. B April 2005 Revision BErratum December 2005 An erratum was published to correct the omission of the MEID parameter from several operations.ANSI/J-STD-036-B

39、 November 2006 Initial ANSI publicationANSI/J-STD-036-C September 2009 Support for cdma2000 Femto CellsANSI/J-STD-036-C-1 September 2013 New Class of Service Position Source indicators and associ-ated Position Source codesANSI/J-STD-036-C-2 June, 2017 Add 6 handset and 5 hybrid position source codes

40、 for geodetic position reporting. Add 3 class of service codes for civic address reporting.1234567891011121314151617181920212223242526272829303132333435363738394041424344454647484950515253545556575859ForewordThis foreword is not part of this standard.This Standard was prepared jointly by TIA TR-45.8

41、 under the TIA Engineering Committee TR-45and by the ATIS ELOC Task Force, comprised of the ATIS Wireless Technologies and SystemsCommittee (WTSC) and the Emergency Services Interconnection Forum (ESIF).ANSI/J-STD-036-C-2E includes support for cdma2000 Femto Cells TIA 1165.ANSI/J-STD-036-C-2E define

42、s new Handset, Hybrid and Class of Service Position Source values.It also corrects typographical errors.This Standard contains eight annexes of which Annex C and Annex D are considered normative andpart of this Standard. The remaining annexes are considered informative and not part of thisStandard.A

43、ll text added in J-STD-036-C-1 is shown in dark blue.All text added in J-STD-036-C-2 is shown in forest green.All text deleted since J-STD-036-C is shown in red struck-through text.ANSI/J-STD-036-C-2EiEnhanced Wireless 9-1-1 Phase IIContentsChapter 1: Overview1 Introduction .1-11.1 Objective1-11.2 S

44、cope1-11.3 Normative References1-12 Definitions and Acronyms .1-6Chapter 2: Stage 1 Emergency Services Service Descriptions1 Introduction .2-11.1 Emergency Location Information Delivery (ELID) 2-12 Assumptions .2-12.1 Common Assumptions.2-12.2 ANSI-41 Assumptions .2-22.3 GSM/UMTS Assumptions2-3Chapt

45、er 3: Functional Overview, ANSI-411 Introduction 3-12 Methodology 3-23 Network Reference Model .3-24 Network Entities 3-34.1 Coordinate Routing Database (CRDB)3-34.2 Emergency Services Message Entity (ESME).3-34.3 Emergency Services Network Entity (ESNE) .3-34.4 Mobile Position Center (MPC) 3-34.5 M

46、obile Switching Center (MSC).3-34.6 Position Determining Entity (PDE) .3-34.7 Public Safety Answering Point (PSAP).3-35 Messages Across Network Interfaces.3-46 Network Entity Relationships 3-5Chapter 4: Stage 2 Emergency Services Network Description, ANSI-41.3xx1 Emergency Location Information Deliv

47、ery (ELID) Scenarios .4-2ANSI/J-STD-036-C-2Eii1.1 ELID Using CAS Push 4-21.1.1 PDE Queried for Position 4-21.1.2 PDE Autonomous Delivery of Position 4-31.1.3 Timeout Waiting for Position . 4-41.1.4 Three-Way Call to PSAP After Intersystem Handoff 4-51.2 ELID Using NCAS Pull . 4-71.2.1 PDE Queried Fo

48、r Position . 4-71.2.2 PDE Autonomous Delivery of Position 4-81.3 Emergency Services Call Routing and ELID . 4-91.3.1 Routing Based on Position. 4-91.3.2 Inter-MSC Routing Based on Position . 4-111.3.3 Routing Based on Cell/Sector . 4-131.4 Position Update Using NCAS Pull . 4-151.4.1 ESME Request for

49、 Position Update 4-151.4.2 Inter-MSC Request for Updated Position . 4-161.4.3 Failed Position Update Due to Unavailable MS . 4-181.5 Failure Cases 4-191.5.1 MPC Failure on Call Origination 4-191.6 Call Termination . 4-201.6.1 Call Termination Reporting. 4-201.6.2 Call Disconnect During Positioning 4-211.7 PDE Use of Network Data . 4-231.7.1 PDE Request for CDMA Pilot Strength Measurements 4-231.7.2 TDMA MAHO Obtained After Call Setup 4-241.7.3 TDMA MAHO obtained after Inter-System Handoff 4-262 PDE to MS Scenarios for Handset-Based PDE 4-282.1 CDMA . 4-282.1.1