ATIS J-STD-036-C-2011 Enhanced Wireless 9-1-1 Phase II.pdf

1、 J-STD-036-C June 2011 Enhanced Wireless 9-1-1 Phase II ANSI/J-STD-036-C-2011 APPROVED: JUNE 20, 2011 JOINT STANDARDS Joint Standards and Publications are adopted in accordance with the American National Standards Institute (ANSI) patent policy. By such action, the Telecommunications Industry Associ

2、ation or the Alliance for Telecommunications Industry Solutions does not assume any liability to any patent owner, nor does it assume any obligation whatever to parties adopting the Standard or Publication. This Standard does not purport to address all safety problems associated with its use or all

3、applicable regulatory requirements. It is the responsibility of the user of this Standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations before its use. This standard was developed under Project No. SP-3-3890-RV3, formulated under th

4、e cognizance of the TIA TR-45 Committee on Mobile Telephone (703)907-7700; Fax: (703)907-7727 or by email to standardstiacomm.org. This document was coordinated between ATIS and TIA. A Word from TIA: TIA Engineering Standards and Publications are designed to serve the public interest through elimina

5、ting misunderstanding between manufacturers and purchasers, facilitating interchangeability and improvement of products, and assisting the purchaser in selecting and obtaining with minimum delay the proper product for his/her particular need. Existence of such Standards and Publications shall not be

6、 in any respect preclude any member or nonmember of TIA from manufacturing or selling products not conforming to such Standards and Publications, nor shall the existence of such Standards and Publications preclude their voluntary use by those other than TIA members, whether the standard is to be use

7、d either domestically or internationally. TIA Documents contain information deemed to be of technical value to the industry, and are published at the request of the originating Committee without necessarily following the rigorous public review and resolution of comments which is a procedural part of

8、 the development of a American National Standard (ANS). Further details of the development process are available in the TIA Engineering Manual, located at http:/www.tiaonline.org/standards/sfg/engineering_manual.cfm A Word from ATIS: ATIS is the leading technical planning and standards development o

9、rganization committed to the rapid development of global, market-driven standards for the information, entertainment and communications industry. More than 200 companies actively formulate standards in ATIS Committees, covering issues including: IPTV, Cloud Services, Energy Efficiency, IP-Based and

10、Wireless Technologies, Quality of Service, Billing and Operational Support, Emergency Services, Architectural Platforms and Emerging Networks. In addition, numerous Incubators, Focus and Exploratory Groups address evolving industry priorities including Smart Grid, Machine-to-Machine, Networked Car,

11、IP Downloadable Security, Policy Management and Network Optimization. ATIS is the North American Organizational Partner for the 3rd Generation Partnership Project (3GPP), a member and major U.S. contributor to the International Telecommunication Union (ITU) Radio and Telecommunications Sectors, and

12、a member of the Inter-American Telecommunication Commission (CITEL). ATIS is accredited by the American National Standards Institute (ANSI). For more information, please visit www.atis.org. NOTICE FROM PATENT HOLDERS The users attention is called to the possibility that compliance with this standard

13、 may require use of an invention covered by patent rights. By publication of this standard, no position is taken with respect to the validity of this claim or of any patent rights in connection therewith. The patent holder has, however, filed a statement of willingness to grant a license under these

14、 rights on reasonable and nondiscriminatory terms and conditions to applicants desiring to obtain a license. Details may be obtained from the Telecommunications Industry Association, Alliance for Telecommunications Industry Solutions or the American National Standards Institute. Copyright Telecommun

15、ications Industry Association 2011 Copyright Alliance for Telecommunications Industry Solutions 2011 All rights reserved This document is subject to change. NOTICE OF COPYRIGHT This document is issued under a joint copyright by the Telecommunications Industry Association and the Alliance for Telecom

16、munications Industry Solutions, and may not be reproduced without permission. Reproduction of these documents either in hard copy or soft copy (including posting on the web) is prohibited without copyright permission. For copyright permission to reproduce portions of this document, please contact TI

17、A Standards Department or go to the TIA website (www.tiaonline.org) for details on how to request permission. Details are located at: http:/www.tiaonline.org/about/faqDetail.cfm?id=18 Organizations may obtain permission to reproduce a limited number of copies by entering into a license agreement. Fo

18、r information, contact: Global Engineering Documents 15 Inverness Way East Englewood, CO 80112-5704 or call U.S.A. and Canada (1-800-854-7179) International (303) 397-7956 OR ATIS Document Center: http:/www.atis.org/docstore/default.aspx Alliance for Telecommunications Industry Solutions 1200 G Stre

19、et, NW Suite 500 Washington, DC 20005 (202) 628-6380 NOTICE OF DISCLAIMER AND LIABILITY The document to which this Notice is affixed (the “Document”) has been prepared by one or more Engineering Committees or Formulating Groups of the Telecommunications Industry Association (“TIA”). In addition, the

20、 Document was balloted by ATIS Wireless Technologies and Systems Committee. TIA is not the author of the Document contents, but publishes and claims copyright to the Document pursuant to licenses and permission granted by the authors of the contents. TIA Engineering Committees and Formulating Groups

21、 are expected to conduct their affairs in accordance with the TIA Engineering Manual (“Manual”), the current and predecessor versions of which are available at http:/www.tiaonline.org/standards/sfg/engineering_manual.cfm. The ATIS Wireless Technologies and Systems Committee is expected to conduct it

22、s affairs in accordance with the ATIS Operating Procedures which is available at http:/www.atis.org/legal/op.asp. TIAs function is to administer the process, but not the content, of document preparation in accordance with the Manual and, when appropriate, the policies and procedures of the American

23、National Standards Institute (“ANSI”). Likewise, ATIS function, and on behalf of its Committees and Forums, is to administer the process according to its Operating Procedures, but not develop the content of the document. TIA and ATIS do not evaluate, test, verify or investigate the information, accu

24、racy, soundness, or credibility of the contents of the Document. In publishing the Document, TIA and ATIS disclaim any undertaking to perform any duty owed to or for anyone. If the Document is identified or marked as a project number (PN) document, or as a standards proposal (SP) document, persons o

25、r parties reading or in any way interested in the Document are cautioned that: (a) the Document is a proposal; (b) there is no assurance that the Document will be approved by any Committee of TIA or any other body in its present or any other form; (c) the Document may be amended, modified or changed

26、 in the standards development or any editing process. The use or practice of contents of this Document may involve the use of intellectual property rights (“IPR”), including pending or issued patents, or copyrights, owned by one or more parties. Neither TIA nor ATIS makes any search or investigation

27、 for IPR. When IPR consisting of patents and published pending patent applications are claimed and called to TIAs attention, a statement from the holder thereof is requested, all in accordance with the Manual. When IPR consisting of patents are claimed and called to ATISs attention, a statement from

28、 the holder thereof is requested, all in accordance with the ATISs Operating Procedures. Neither TIA nor ATIS takes any position with reference to, and disclaims any obligation to investigate or inquire into, the scope or validity of any claims of IPR. Neither TIA or ATIS will neither be a party to

29、discussions of any licensing terms or conditions, which are instead left to the parties involved, nor will TIA or ATIS opine or judge whether proposed licensing terms or conditions are reasonable or non-discriminatory. TIA does not warrant or represent that procedures or practices suggested or provi

30、ded in the Manual have been complied with as respects the Document or its contents. TIA and ATIS do not enforce or monitor compliance with the contents of the Document. TIA and ATIS do not certify, inspect, test or otherwise investigate products, designs or services or any claims of compliance with

31、the contents of the Document. ALL WARRANTIES, EXPRESS OR IMPLIED, ARE DISCLAIMED, INCLUDING WITHOUT LIMITATION, ANY AND ALL WARRANTIES CONCERNING THE ACCURACY OF THE CONTENTS, ITS FITNESS OR APPROPRIATENESS FOR A PARTICULAR PURPOSE OR USE, ITS MERCHANTABILITY AND ITS NON-INFRINGEMENT OF ANY THIRD PA

32、RTYS INTELLECTUAL PROPERTY RIGHTS. TIA AND ATIS EXPRESSLY DISCLAIM ANY AND ALL RESPONSIBILITIES FOR THE ACCURACY OF THE CONTENTS AND MAKE NO REPRESENTATIONS OR WARRANTIES REGARDING THE CONTENTS COMPLIANCE WITH ANY APPLICABLE STATUTE, RULE OR REGULATION, OR THE SAFETY OR HEALTH EFFECTS OF THE CONTENT

33、S OR ANY PRODUCT OR SERVICE REFERRED TO IN THE DOCUMENT OR PRODUCED OR RENDERED TO COMPLY WITH THE CONTENTS. NEITHER TIA NOR ATIS SHALL BE LIABLE FOR ANY AND ALL DAMAGES, DIRECT OR INDIRECT, ARISING FROM OR RELATING TO ANY USE OF THE CONTENTS CONTAINED HEREIN, INCLUDING WITHOUT LIMITATION ANY AND AL

34、L INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF BUSINESS, LOSS OF PROFITS, LITIGATION, OR THE LIKE), WHETHER BASED UPON BREACH OF CONTRACT, BREACH OF WARRANTY, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF S

35、UCH DAMAGES. THE FOREGOING NEGATION OF DAMAGES IS A FUNDAMENTAL ELEMENT OF THE USE OF THE CONTENTS HEREOF, AND THESE CONTENTS WOULD NOT BE PUBLISHED BY TIA WITHOUT SUCH LIMITATIONS.ANSI/J-STD-036-CEnhanced Wireless 9-1-1 Phase IIRevision HistoryCopyright 2009 by Alliance for Telecommunications Indus

36、try Solutions and Telecommunications Industry Association.All rights reserved.This document is subject to change.ForewordThis foreword is not part of this standard.This Standard was prepared jointly by TIA TR-45.8 and ATIS WTSC.J-STD-036-C includes support for cdma2000 Femto Cells TIA 1165.This Stan

37、dard contains eight annexes of which Annex C and Annex D are considered normativeand part of this Standard. The remaining annexes are considered informative and not part of thisStandard.All text modified by this revision of the Standard is shown in red.Revision Date RemarksRev. 0 August 2000 Initial

38、 publicationRev. 0 Addendum 1 December 2000 First addendumRev. A March 2002 Publication of Revision ARev. A Addendum 1 March 2003 Addendum to Revision ARev. B April 2005 Revision BErratum December 2005 An erratum was published to correct the omission of the MEID parameter from several operations.ANS

39、I/J-STD-036-B November 2006 Initial ANSI publicationANSI/J-STD-036-C September 2009 Support for cdma2000 Femto CellsANSI/J-STD-036-CiEnhanced Wireless 9-1-1 Phase IIContentsChapter 1: Overview1 Introduction .1-11.1 Objective1-11.2 Scope1-11.3 Normative References1-12 Definitions and Acronyms .1-6Cha

40、pter 2: Stage 1 Emergency Services Service Descriptions1 Introduction .2-11.1 Emergency Location Information Delivery (ELID) 2-12 Assumptions .2-12.1 Common Assumptions.2-12.2ANSI-41Assumptions .2-22.3 GSM/UMTS Assumptions2-3Chapter 3: Functional Overview, ANSI-411 Introduction 3-12 Methodology 3-23

41、 Network Reference Model .3-24 Network Entities 3-34.1 Coordinate Routing Database (CRDB)3-34.2 Emergency Services Message Entity (ESME).3-34.3 Emergency Services Network Entity (ESNE) .3-34.4 Mobile Position Center (MPC) 3-34.5 Mobile Switching Center (MSC).3-34.6 Position Determining Entity (PDE)

42、.3-34.7 Public Safety Answering Point (PSAP).3-35 Messages Across Network Interfaces.3-46 Network Entity Relationships 3-5Chapter 4: Stage 2 Emergency Services Network Description, ANSI-41.3xx1 Emergency Location Information Delivery (ELID) Scenarios .4-2ANSI/J-STD-036-Cii1.1 ELID Using CAS Push4-21

43、.1.1 PDE Queried for Position 4-21.1.2 PDE Autonomous Delivery of Position 4-31.1.3 Timeout Waiting for Position .4-41.1.4 Three-Way Call to PSAP After Intersystem Handoff 4-51.2 ELID Using NCAS Pull .4-71.2.1 PDE Queried For Position .4-71.2.2 PDE Autonomous Delivery of Position 4-81.3 Emergency Se

44、rvices Call Routing and ELID .4-91.3.1 Routing Based on Position.4-91.3.2 Inter-MSC Routing Based on Position .4-111.3.3 Routing Based on Cell/Sector .4-131.4 Position Update Using NCAS Pull .4-151.4.1 ESME Request for Position Update.4-151.4.2 Inter-MSC Request for Updated Position .4-161.4.3 Faile

45、d Position Update Due to Unavailable MS .4-181.5 Failure Cases 4-191.5.1 MPC Failure on Call Origination 4-191.6 Call Termination .4-201.6.1 Call Termination Reporting.4-201.6.2 Call Disconnect During Positioning 4-211.7 PDE Use of Network Data .4-231.7.1 PDE Request for CDMA Pilot Strength Measurem

46、ents4-231.7.2 TDMA MAHO Obtained After Call Setup .4-241.7.3 TDMA MAHO obtained after Inter-System Handoff 4-262 PDE to MS Scenarios for Handset-Based PDE 4-282.1 CDMA .4-282.1.1 PDE to MS Communication via E12 Interface.4-282.1.2 Communication via E5and E3Interfaces .4-302.1.3 Position Determinatio

47、n after Handoff .4-322.2 TDMA SAMPS 4-342.2.1 PDE to MS Communication via E12 Interface.4-342.2.2 Communication via E5and E3Interfaces .4-362.2.3 Position Update after Handoff 4-383 Mobile Initiated Positioning 4-403.1 MS Originated Position Determination for Emergency ServicesCall (Successful CAS P

48、ush - E5/E3Interfaces).4-403.2 MS Originated Position Determination for Emergency ServicesCall (POST Timer Expiry) .4-433.3 TDMA SAMPS Emergency Position Report .4-463.4 TDMA Inter-MSC Three-Way Call to PSAP using SAMPS .4-484 Interim Position .4-504.1 Successful Routing Based on Interim Position .4

49、-504.2 Interim Position Used as Final Position Due to Timeout4-524.3 Interim Position Used as Final Position Due to PDE Error.4-545 Interface Testing .4-565.1 Test Message Initiated by ESME 4-56ANSI/J-STD-036-Ciii5.2 Heartbeat Mechanism Initiated by MPC4-56Chapter 5: Functional Overview, GSM/UMTS1 Introduction 5-12 Methodology.5-13 Condensed GSM/UMTS Network Reference Model5-14 Network Entities.5-24.1 Base Station System (BSS)5-24.2 Emergency Services Message Entity (ESME).5-24.3 Emergency Services Network Entity (ESNE) .5-24.4 Gateway Mobile Location Center (GMLC).5-24.