AWS A5 9 A5 9M-2017 Welding Consumables-Wire Electrodes Strip Electrodes Wires and Rods for Arc Welding of Stainless and Heat Resisting Steels- Classification (9th Edition).pdf

1、Welding ConsumablesWire Electrodes, Strip Electrodes, Wires, and Rods for Arc Welding of Stainless and Heat Resisting SteelsClassification AWS A5.9/A5.9M:2017(ISO 14343:2009 MOD)An American National StandardAWS A5.9/A5.9M:2017(ISO 14343:2009 MOD)An American National StandardApproved byAmerican Natio

2、nal Standards InstituteDecember 09, 2016Welding ConsumablesWire Electrodes, StripElectrodes, Wires, and Rods for Arc Weldingof Stainless and Heat ResistingSteelsClassification9th EditionSupersedes AWS A5.9/A5.9M:2012Prepared by theAmerican Welding Society (AWS) A5 Committee on Filler Metals and Alli

3、ed MaterialsUnder the Direction of theAWS Technical Activities CommitteeApproved by theAWS Board of DirectorsAbstractThis specification prescribes the requirements for classification of bare solid stainless steel electrodes (both as wire and strip) for gas metal arc welding, submerged arc welding, a

4、nd other fusion welding processes. It also includes wire and rods for use in gas tungsten arc welding and plasma arc welding. Classification is based on chemical composition of the filler metal. A guide is appended to the specification as a source of information concerning the classification system

5、employed and the intended use of the stainless steel filler metal.This specification does not include any units other than weight percent. The specifications Annex A makes use of both U.S. Customary Units and the International System of Units (SI). Since these are not equivalent, each system must be

6、 used independently of the other.AWS A5.9/A5.9M:2017 (ISO 14343:2009 MOD)iiISBN: 978-0-87171-905-8 2017 by American Welding SocietyAll rights reservedPrinted in the United States of AmericaPhotocopy Rights. No portion of this standard may be reproduced, stored in a retrieval system, or transmitted i

7、n any form, including mechanical, photocopying, recording, or otherwise, without the prior written permission of the copyright owner.Authorization to photocopy items for internal, personal, or educational classroom use only or the internal, personal, or educational classroom use only of specific cli

8、ents is granted by the American Welding Society provided that the appropri-ate fee is paid to the Copyright Clearance Center, 222 Rosewood Drive, Danvers, MA 01923, tel: (978) 750-8400; Internet: .AWS A5.9/A5.9M:2017 (ISO 14343:2009 MOD)iiiStatement on the Use of American Welding Society StandardsAl

9、l standards (codes, specifications, recommended practices, methods, classifications, and guides) of the American Welding Society (AWS) are voluntary consensus standards that have been developed in accordance with the rules of the American National Standards Institute (ANSI). When AWS American Nation

10、al Standards are either incorporated in, or made part of, documents that are included in federal or state laws and regulations, or the regulations of other governmen-tal bodies, their provisions carry the full legal authority of the statute. In such cases, any changes in those AWS standards must be

11、approved by the governmental body having statutory jurisdiction before they can become a part of those laws and regulations. In all cases, these standards carry the full legal authority of the contract or other document that invokes the AWS standards. Where this contractual relationship exists, chan

12、ges in or deviations from requirements of an AWS standard must be by agreement between the contracting parties.AWS American National Standards are developed through a consensus standards development process that brings together volunteers representing varied viewpoints and interests to achieve conse

13、nsus. While AWS administers the proc-ess and establishes rules to promote fairness in the development of consensus, it does not independently test, evaluate, or verify the accuracy of any information or the soundness of any judgments contained in its standards.AWS disclaims liability for any injury

14、to persons or to property, or other damages of any nature whatsoever, whether special, indirect, consequential, or compensatory, directly or indirectly resulting from the publication, use of, or reliance on this standard. AWS also makes no guarantee or warranty as to the accuracy or completeness of

15、any information pub-lished herein.In issuing and making this standard available, AWS is neither undertaking to render professional or other services for or on behalf of any person or entity, nor is AWS undertaking to perform any duty owed by any person or entity to someone else. Anyone using these d

16、ocuments should rely on his or her own independent judgment or, as appropriate, seek the advice of a competent professional in determining the exercise of reasonable care in any given circumstances. It is assumed that the use of this standard and its provisions is entrusted to appropriately qualifie

17、d and competent personnel.This standard may be superseded by new editions. This standard may also be corrected through publication of amend-ments or errata, or supplemented by publication of addenda. Information on the latest editions of AWS standards includ-ing amendments, errata, and addenda is po

18、sted on the AWS web page (www.aws.org). Users should ensure that they have the latest edition, amendments, errata, and addenda.Publication of this standard does not authorize infringement of any patent or trade name. Users of this standard accept any and all liabilities for infringement of any paten

19、t or trade name items. AWS disclaims liability for the infringement of any patent or product trade name resulting from the use of this standard.AWS does not monitor, police, or enforce compliance with this standard, nor does it have the power to do so.Official interpretations of any of the technical

20、 requirements of this standard may only be obtained by sending a request, in writing, to the appropriate technical committee. Such requests should be addressed to the American Welding Society, Attention: Managing Director, Standards Development, 8669 NW 36 St, # 130, Miami, FL 33166 (see Annex B). W

21、ith regard to technical inquiries made concerning AWS standards, oral opinions on AWS standards may be rendered. These opinions are offered solely as a convenience to users of this standard, and they do not constitute professional advice. Such opinions represent only the personal opinions of the par

22、ticular individuals giving them. These individuals do not speak on behalf of AWS, nor do these oral opinions constitute official or unofficial opinions or interpretations of AWS. In addi-tion, oral opinions are informal and should not be used as a substitute for an official interpretation.This stand

23、ard is subject to revision at any time by the AWS A5 Committee on Filler Metals and Allied Materials. It must be reviewed every five years, and if not revised, it must be either reaffirmed or withdrawn. Comments (recommendations, additions, or deletions) and any pertinent data that may be of use in

24、improving this standard are requested and should be addressed to AWS Headquarters. Such comments will receive careful consideration by the AWS A5 Committee on Filler Metals and Allied Materials and the author of the comments will be informed of the Committees response to the com-ments. Guests are in

25、vited to attend all meetings of the AWS A5 Committee on Filler Metals and Allied Materials to express their comments verbally. Procedures for appeal of an adverse decision concerning all such comments are pro-vided in the Rules of Operation of the Technical Activities Committee. A copy of these Rule

26、s can be obtained from the American Society, 8669 NW 36 St, # 130, Miami, FL 33166.AWS A5.9/A5.9M:2017 (ISO 14343:2009 MOD)ivThis page is intentionally blank.AWS A5.9/A5.9M:2017 (ISO 14343:2009 MOD)vPersonnelAWS A5 Committee on Filler Metals and Allied MaterialsH. D. Wehr, Chair Arcos Industries LLC

27、R. D. Fuchs, 2nd Vice Chair Voestalpine Bohler Welding USA IncorporatedR. K. Gupta, Secretary American Welding SocietyT. Anderson ITW Welding North AmericaJ. C. Bundy Hobart Brothers CompanyJ.L. Caron Haynes International, IncorporatedG. L. Chouinard Stoody Company (a division of ESAB)D. D. Crockett

28、 ConsultantR. V. Decker WeldstarD. M. Fedor The Lincoln Electric CompanyJ. G. Feldstein Foster Wheeler North AmericaD. A. Fink The Lincoln Electric CompanyG. L. Franke ConsultantR. M. Henson Harris Products GroupS. D. Kiser ConsultantP. J. Konkol Concurrent Technologies CorporationD. J. Kotecki Dami

29、an Kotecki Welding ConsultantsL. G. Kvidahl Ingalls ShipbuildingA. Y. Lau Canadian Welding BureauJ. S. Lee ChevronJ.R. Logan Babcock generally used in gas metal arc and submerged arc welding.4. Classification4.1 General A wire electrode, strip electrode, wire, or rod shall be classified according to

30、 its chemical composition as given in Table 1.The classification is divided into two parts:(a) the first gives a symbol indicating the product/process to be identified;(b) the second gives a symbol indicating the chemical composition of the wire electrode, strip electrode, wire, or rod.See Clause 14

31、 for examples of AWS Classifications/Designations.4.2 Materials may be classified under more than one classification provided they meet all the requirements of those classifications as specified in Table 1. When assigning classification/designation to a product, subclass 4.3A with classification acc

32、ording to nominal composition (Nominal Composition Designation column of Table 1) shall be used independently of subclass 4.3B with classification according to alloy type (Traditional AWS A5.9 Alloy Designation column of Table 1), and vice versa.3ASTM standards are published by ASTM International, 1

33、00 Barr Harbor Drive, West Conshohockon, PA 19428-2959.4ISO standards are published by International Organization for Standardization; ISO Central Secretariat; Chemin de Blandonnet 8; Case postale 401; 1214 Vernier, Geneva, Switzerland.AWS A5.9/A5.9M:2017 (ISO 14343:2009 MOD)3Table 1Chemical Composi

34、tion RequirementsTraditional AWS A5.9 Alloy DesignationcNominal Composition DesignationcComposition, Wt %a,bOther ElementsCCrNiMoMnSiPSNCuElementAmount2090.0520.524.09.512.01.53.04.07.00.900.030.030.100.300.75V0.100.302180.1016.018.08.09.00.757.09.03.54.50.030.030.080.180.752190.0519.021.55.57.00.75

35、8.010.01.000.030.030.100.300.752400.0517.019.04.06.00.7510.513.51.000.030.030.100.300.753070.040.1419.522.08.010.70.51.53.304.750.300.650.030.030.7518 8 Mnj0.2017.020.07.010.00.55.08.01.20.030.030.53080.0819.522.09.011.00.751.02.50.300.650.030.030.75308Si0.0819.522.09.011.00.751.02.50.651.000.030.03

36、0.75308H0.040.0819.522.09.011.00.501.02.50.300.650.030.030.75308L0.0319.522.09.011.00.751.02.50.300.650.030.030.7519 9 Lj0.0319.021.09.011.00.51.02.50.650.030.020.5308LSi0.0319.522.09.011.00.751.02.50.651.000.030.030.7519 9 LSij0.0319.021.09.011.00.51.02.50.651.250.030.020.5308Mo0.0818.021.09.012.02

37、.03.01.02.50.300.650.030.030.7520 10 3j0.1218.021.08.012.01.53.51.02.51.00.030.020.5308LMo0.0418.021.09.012.02.03.01.02.50.300.650.030.030.7521 10 Nd, j0.060.0920.522.59.511.00.50.31.01.02.00.020.010.100.200.5Ce0.030.083090.1223.025.012.014.00.751.02.50.300.650.030.030.7522 12 Hj0.040.1521.024.011.0

38、14.00.51.02.52.00.030.020.5309Si0.1223.025.012.014.00.751.02.50.651.000.030.030.75309L0.0323.025.012.014.00.751.02.50.300.650.030.030.7523 12 Lj0.0322.025.011.014.00.51.02.50.650.030.020.5309LDf, j22 12 Lf,j0.0321.024.010.012.00.751.02.50.650.030.030.75309LSi0.0323.025.012.014.00.751.02.50.651.000.0

39、30.030.7523 12 LSij0.0322.025.011.014.00.51.02.50.651.250.030.020.5309Mo0.1223.025.012.014.02.03.01.02.50.300.650.030.030.75309LMo0.0323.025.012.014.02.03.01.02.50.300.650.030.030.7523 12 2 Lj0.0321.025.011.015.52.03.51.02.51.00.030.020.5309LMoDf, j0.0319.022.012.014.02.33.31.02.50.650.030.030.7521

40、13 3 Lf, j0.0319.022.012.014.02.83.31.02.50.650.030.030.75309LNbj0.0323.025.012.014.00.751.02.50.650.030.030.75Nbg10C to 1.0; 0.2 min23 12 Nbj0.0822.025.011.014.00.51.02.51.00.030.020.5Nbg10C to 1.0309LNbDf, j2212LNbf,j0.0320.023.011.013.00.751.02.50.650.030.030.75Nbg10C to 1.2; 0.2 min310d0.080.152

41、5.028.020.022.50.751.02.50.300.650.030.030.7525 20e, j0.080.1524.027.018.022.00.51.02.52.00.030.020.525 20 Mne, j0.080.1524.027.018.022.00.52.55.02.00.030.020.525 20 Hd, j0.350.4524.027.018.022.00.51.02.52.00.030.020.5310Ld, j0.0325.028.020.022.50.751.02.50.650.030.030.75310Sd, j0.0825.028.020.022.5

42、0.751.02.50.650.030.030.7525222NLe,j0.0324.027.021.024.01.53.03.56.51.00.030.020.100.200.526 23 5 Ne, j0.0225.027.021.025.04.06.01.55.51.00.020.010.300.400.53120.1528.032.08.010.50.751.02.50.300.650.030.030.7529 9j0.1528.032.08.012.00.51.02.51.00.030.020.5(Continued)AWS A5.9/A5.9M:2017 (ISO 14343:20

43、09 MOD)4Table 1 (Continued)Chemical Composition RequirementsTraditional AWS A5.9 Alloy DesignationcNominal Composition DesignationcComposition, Wt %a,bOther ElementsCCrNiMoMnSiPSNCuElementAmount3160.0818.020.011.014.02.03.01.02.50.300.650.030.030.75316Si0.0818.020.011.014.02.03.01.02.50.651.000.030.

44、030.75316H0.040.0818.020.011.014.02.03.01.02.50.300.650.030.030.7519 12 3 Hj0.040.0818.020.011.014.02.03.01.02.51.00.030.020.5316L0.0318.020.011.014.02.03.01.02.50.300.650.030.030.7519 12 3 Lj0.0318.020.011.014.02.53.01.02.50.650.030.020.5316LCuj0.0318.020.011.014.02.03.01.02.50.650.030.031.02.5316L

45、Si0.0318.020.011.014.02.03.01.02.50.651.000.030.030.7519 12 3 LSij0.0318.020.011.014.02.53.01.02.50.651.250.030.020.5316LMne0.0319.022.015.018.02.53.55.09.00.300.650.030.030.100.200.7520 16 3 Mn N Le, j0.0319.022.015.018.02.54.55.09.01.00.030.020.100.200.520163MnLe,j0.0319.022.015.018.02.54.55.09.01

46、.00.030.020.53170.0818.520.513.015.03.04.01.02.50.300.650.030.030.75317L0.0318.520.513.015.03.04.01.02.50.300.650.030.030.7518 15 3 Le, j0.0317.020.013.016.02.54.01.04.01.00.030.020.519 13 4 Le, j0.0317.020.012.015.03.04.51.05.01.00.030.020.519 13 4 N Le, j0.0317.020.012.015.03.04.51.05.01.00.030.02

47、0.100.200.518 16 5 N Le, j0.0317.020.016.019.03.55.01.04.01.00.030.020.100.200.53180.0818.020.011.014.02.03.01.02.50.300.650.030.030.75Nbg8C to 1.0; 0.2 min19 12 3 Nbj0.0818.020.011.014.02.53.01.02.50.650.030.020.5Nbg10C to 1.019 12 3 Nb Sij0.0818.020.011.014.02.53.01.02.50.651.250.030.020.5Nbg10C t

48、o 1.0318Lj0.0318.020.011.014.02.03.01.02.50.650.030.030.75Nbg8C to 1.0; 0.2 min320d0.0719.021.032.036.02.03.02.50.600.030.033.04.0Nbg8C to 1.0320LRd0.02519.021.032.036.02.03.01.52.00.150.0150.023.04.0Nbg8C to 0.403210.0818.520.59.010.50.751.02.50.300.650.030.030.75Ti9C to 1.0; 0.2 min330d0.180.2515.017.034.037.00.751.02.50.300.650.030.030.75