AWWA C704-2015 Propeller-Type Meters for Waterworks Applications.pdf

1、 AWWA Standard SM Propeller-Type Meters for Waterworks Applications Effective date: Apr. 1, 2015. First edition approved by AWWA Board of Directors July 21, 1949. This edition approved Jan. 24, 2015. Approved by American National Standards Institute Oct. 16, 2014. ANSI/AWWA C704-15 (Revision of ANSI

2、/AWWA C704-12) Copyright 2015 American Water Works Association. All Rights Reserved. ii AWWA Standard This document is an American Water Works Association (AWWA) standard. It is not a specification. AWWA standards describe minimum requirements and do not contain all of the engineering and administra

3、tive information normally contained in specifications. The AWWA standards usually contain options that must be evaluated by the user of the standard. Until each optional feature is specified by the user, the product or service is not fully defined. AWWA pub- lication of a standard does not constitut

4、e endorsement of any product or product type, nor does AWWA test, certify, or approve any product. The use of AWWA standards is entirely voluntary. This standard does not supersede or take precedence over or displace any applicable law, regulation, or code of any governmental authority. AWWA standar

5、ds are intended to represent a consensus of the water supply industry that the product described will provide satisfactory service. When AWWA revises or withdraws this standard, an official notice of action will be placed in the Official Notice section of Journal - American Water Works Association.

6、The action becomes effective on the first day of the month fol- lowing the month of Journal - American Water Works Association publication of the official notice. American National Standard An American National Standard implies a consensus of those substantially concerned with its scope and provisio

7、ns. An American National Standard is intended as a guide to aid the manufacturer, the consumer, and the general public. The existence of an American National Standard does not in any respect preclude anyone, whether that person has ap - proved the standard or not, from manufacturing, marketing, purc

8、hasing, or using products, processes, or procedures not conforming to the standard. American National Standards are subject to periodic review, and users are cautioned to obtain the latest editions. Producers of goods made in conformity with an American National Standard are encour - aged to state o

9、n their own responsibility in advertising and promotional materials or on tags or labels that the goods are produced in conformity with particular American National Standards. Caution n oti Ce : The American National Standards Institute (ANSI) approval date on the front cover of this standard indica

10、tes completion of the ANSI approval process. This American National Standard may be revised or withdrawn at any time. ANSI procedures require that action be taken to reaffirm, revise, or withdraw this standard no later than five years from the date of ANSI approval. Purchasers of American National S

11、tandards may receive current information on all standards by calling or writing the American National Standards Institute, 25 West 43rd Street, Fourth Floor, New York, NY 10036; 212.642.4900, or emailing infoansi.org. ISBN-13, print: 978-1-62576-056-2 eISBN-13, electronic: 978-1-61300-318-3DOI: http

12、:/dx.doi.org/10.12999/AWWA.C704.15 All rights reserved. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopy, recording, or any information or retrieval system, except in the form of brief excerpts or quotations for r

13、eview purposes, without the written permission of the publisher. Copyright 2015 by American Water Works Association Printed in USA hours of work by your fellow water professionals. Revenue from the sales of this AWWA material supports ongoing product development. Unauthorized distribution, either el

14、ectronic or photocopied, is illegal and hinders AWWAs mission to support the water community. This AWWA content is the product of thousands of Copyright 2015 American Water Works Association. All Rights Reserved. iii Committee Personnel The AWWA Subcommittee on Current-Type Meters, which developed t

15、his standard, had the fol- lowing personnel at the time: Donald J. Kullmann, Chair R.A. Barillas, Badger Meter, Milwaukee, Wis. (AWWA) M.C. Bowen, City of Columbus, Division of Water, Columbus, Ohio (AWWA) D. Casper, Mueller Systems, Cleveland, S.C. (AWWA) G.H. De Jarlais, Badger Meter, Milwaukee, W

16、is. (AWWA) A. Dudley, Itron, West Union, S.C. (AWWA) D.E. Hood, M.E. Simpson Company Inc., Valparaiso, Ind. (AWWA) R.N. Koch, Master Meter Inc., Pittsburgh, Pa. (AWWA) D.J. Kullmann, Neptune Technology Group Inc., Marietta, Ga. (AWWA) J.F. Panek Jr., McCrometer Inc., Rowley, Iowa (AWWA) J.A. Reiss,

17、Elster AMCO Water LLC, Ocala, Fla. (AWWA) J.R. Scarborough III, Neptune Technology Group Inc., Tallassee, Ala. (AWWA) T. Smith, Sensus, Raleigh, N.C. (AWWA) S.M. Swanson, Sensus, Uniontown, Pa. (AWWA) W.J. Vetter, Master Meter Inc., Mansfield, Texas (AWWA) A.M. Watson, Elster AMCO Water LLC, Ocala,

18、Fla. (AWWA) Th e AWWA Standards Committee on Water Meters, which reviewed and approved this standard, had the following personnel at the time of approval: Thomas A. Kelly Jr., Chair Michael L. Mastic, Secretary General Interest Members D. Faber, Faber Jan. 29, 1984; Jan. 26, 1992; June 16, 2002; Jan

19、. 27, 2008; and June 10, 2012. This edition was approved on Jan. 24, 2015. * American National Standards Institute, 25 West 43rd Street, Fourth Floor, New York, NY 10036. Copyright 2015 American Water Works Association. All Rights Reserved. x I.C. Acceptance. In May 1985, the US Environmental Protec

20、tion Agency (USEPA) entered into a cooperative agreement with a consortium led by NSF International (NSF) to develop voluntary third-party consensus standards and a certification program for direct and indirect drinking water additives. Other members of the original consortium included the Water Res

21、earch Foundation (formerly AwwaRF) and the Conference of State Health and Environmental Managers (COSHEM). The American Water Works Association (AWWA) and the Association of State Drinking Water Administrators (ASDWA) joined later. In the United States, authority to regulate products for use in, or

22、in contact with, drinking water rests with individual states.* Local agencies may choose to impose requirements more stringent than those required by the state. To evaluate the health effects of products and drinking water additives from such products, state and local agencies may use various refere

23、nces, including 1. An advisory program formerly administered by USEPA, Office of Drinking Water, discontinued on Apr. 7, 1990. 2. Specific policies of the state or local agency. 3. Two standards developed under the direction of NSF: NSF/ANSI 60, Drinking Water Treatment ChemicalsHealth Effects, and

24、NSF/ANSI 61, Drinking Water System ComponentsHealth Effects. 4. Other references, including AWWA standards, Food Chemicals Codex, Water Chemicals Codex, and other standards considered appropriate by the state or local agency. Various certification organizations may be involved in certifying products

25、 in accor- dance with NSF/ANSI 61. Individual states or local agencies have authority to accept or accredit certification organizations within their jurisdictions. Accreditation of certi- fication organizations may vary from jurisdiction to jurisdiction. Annex A, “Toxicology Review and Evaluation Pr

26、ocedures,” to NSF/ANSI 61 does not stipulate a maximum allowable level (MAL) of a contaminant for substances not regulated by a USEPA final maximum contaminant level (MCL). The MALs of an unspecified list of “unregulated contaminants” are based on toxicity testing guidelines (noncarcinogens) and ris

27、k characterization methodology (carcinogens). Use of Annex A procedures may not always be identical, depending on the certifier. * Persons outside the United States should contact the appropriate authority having jurisdiction. NSF International, 789 North Dixboro Road, Ann Arbor, MI 48105. Both publications available from National Academy of Sciences, 500 Fifth Street, NW, Washington, DC 20001. Copyright 2015 American Water Works Association. All Rights Reserved.