AWWA C710-2015 Cold-Water Meters-Displacement Type Plastic Main Case.pdf

1、 AWWA Standard SM Cold-Water Meters Displacement Type, Plastic Main Case Effective date: Apr. 1, 2015. First edition approved by AWWA Board of Directors Jan. 25, 1998. This edition approved Jan. 24, 2015. Approved by American National Standards Institute Oct. 20, 2014. ANSI/AWWA C710-15 (Revision of

2、 ANSI/AWWA C710-09) Copyright 2015 American Water Works Association. All Rights Reserved. ii AWWA Standard This document is an American Water Works Association (AWWA) standard. It is not a specification. AWWA standards describe minimum requirements and do not contain all of the engineering and admin

3、istrative information normally contained in specifications. The AWWA standards usually contain options that must be evaluated by the user of the standard. Until each optional feature is specified by the user, the product or service is not fully defined. AWWA pub- lication of a standard does not cons

4、titute endorsement of any product or product type, nor does AWWA test, certify, or approve any product. The use of AWWA standards is entirely voluntary. This standard does not supersede or take precedence over or displace any applicable law, regulation, or code of any governmental authority. AWWA st

5、andards are intended to represent a consensus of the water supply industry that the product described will provide satisfactory service. When AWWA revises or withdraws this standard, an official notice of action will be placed in the Official Notice section of Journal - American Water Works Associat

6、ion. The action becomes effective on the first day of the month fol- lowing the month of Journal - American Water Works Association publication of the official notice. American National Standard An American National Standard implies a consensus of those substantially concerned with its scope and pro

7、visions. An American National Standard is intended as a guide to aid the manufacturer, the consumer, and the general public. The existence of an American National Standard does not in any respect preclude anyone, whether that person has ap - proved the standard or not, from manufacturing, marketing,

8、 purchasing, or using products, processes, or procedures not conforming to the standard. American National Standards are subject to periodic review, and users are cautioned to obtain the latest editions. Producers of goods made in conformity with an American National Standard are encour - aged to st

9、ate on their own responsibility in advertising and promotional materials or on tags or labels that the goods are produced in conformity with particular American National Standards. Caution n oti Ce : The American National Standards Institute (ANSI) approval date on the front cover of this standard i

10、ndicates completion of the ANSI approval process. This American National Standard may be revised or withdrawn at any time. ANSI procedures require that action be taken to reaffirm, revise, or withdraw this standard no later than five years from the date of ANSI approval. Purchasers of American Natio

11、nal Standards may receive current information on all standards by calling or writing the American National Standards Institute, 25 West 43rd Street, Fourth Floor, New York, NY 10036; 212.642.4900, or emailing infoansi.org. ISBN-13, print: 978-1-62576-058-6 eISBN-13, electronic: 978-1-61300-320-6DOI:

12、 http:/dx.doi.org/10.12999/AWWA.C710.15 All rights reserved. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopy, recording, or any information or retrieval system, except in the form of brief excerpts or quotations

13、for review purposes, without the written permission of the publisher. Copyright 2015 by American Water Works Association Printed in USA hours of work by your fellow water professionals. Revenue from the sales of this AWWA material supports ongoing product development. Unauthorized distribution, eith

14、er electronic or photocopied, is illegal and hinders AWWAs mission to support the water community. This AWWA content is the product of thousands of Copyright 2015 American Water Works Association. All Rights Reserved. iii Committee Personnel The AWWA Subcommittee on Displacement-T ype Meters, which

15、developed this standard, had the following personnel at the time: Don Faber, Chair M.J. Aragon, Denver Water, Denver, Colo. (AWWA) R.A. Barillas, Badger Meter, Milwaukee, Wis. (AWWA) G.H. De Jarlais, Badger Meter, Milwaukee, Wis. (AWWA) A. Dudley, Itron, West Union, S.C. (AWWA) D. Faber, Faber & Ass

16、ociates, Columbus, Ind. (AWWA) R.C. Graff, Poway, Calif. (AWWA) L. Gregory, RG3 Meter Company Inc., Longview, Texas (AWWA) B. Hildebrand, Carlon Meter Inc., Grand Haven, Mich. (AWWA) M.C. Johnson, Utah State University, Logan, Utah (AWWA) M.J. Kebles, Water Industry Consultant, Las Vegas, Nev. (AWWA

17、) R.N. Koch, Master Meter Inc., Pittsburgh, Pa. (AWWA) D.J. Kullmann, Neptune Technology Group Inc., Marietta, Ga. (AWWA) A. Land, Dallas Water Utilities, Dallas, Texas (AWWA) K.C. Molli, Veolia Water North America, Chicago, Ill. (AWWA) J. Pintok, RG3 Meter Company Inc., Sanford, Fla. (AWWA) J.A. Re

18、iss, Elster AMCO Water LLC, Ocala, Fla. (AWWA) J.R. Scarborough III, Neptune Technology Group Inc., Tallassee, Ala. (AWWA) T. Smith, Sensus, Raleigh, N.C. (AWWA) S.M. Swanson, Sensus, Uniontown, Pa. (AWWA) M.A. Thomas, Mueller Systems, Cleveland, N.C. (AWWA) W.J. Vetter, Master Meter Inc., Mansfield

19、, Texas (AWWA) A.M. Watson, Elster AMCO Water LLC, Ocala, Fla. (AWWA) The A WWA Standards Committee on Water Meters, which reviewed and approved this standard, had the following personnel at the time of approval: Thomas A. Kelly Jr., Chair Michael L. Mastic, Secretary General Interest Members D. Fab

20、er, Faber & Associates, Columbus, Ind. (AWWA) R.C. Graff, Poway, Calif. (AWWA) Copyright 2015 American Water Works Association. All Rights Reserved. iv D.E. Hood, M.E. Simpson Company Inc., Valparaiso, Ind. (AWWA) M.C. Johnson, Utah State University, Logan, Utah (AWWA) M.J. Kebles, Water Industry Co

21、nsultant, Las Vegas, Nev. (AWWA) F.S. Kurtz,* Standards Engineer Liaison, AWWA, Denver, Colo. (AWWA) M.L. Mastic, MARS Company, Ocala, Fla. (AWWA) R.A. Richter, National Institute of Standards and Technology, Gaithersburg, Md. (AWWA) F.S. Salser Jr., Floyd S. Salser Jr. & Associates MARS Company, Oc

22、ala, Fla. (AWWA) R. San Giacomo, R & D Engineering P.C., Orchard Park, N.Y. (AWWA) J.A. Welsh, Measurement Canada, Ottawa, Ont., Canada (AWWA) Producer Members F.J. Begale, Badger Meter, Milwaukee, Wis. (AWWA) T.D. Bianchi, Neptune Technology Group Inc., Tallassee, Ala. (AWWA) D. Casper, Mueller Sys

23、tems, Cleveland, S.C. (AWWA) G.H. De Jarlais, Badger Meter, Milwaukee, Wis. (AWWA) A. Dudley, Itron, West Union, S.C. (AWWA) L. Gregory, RG3 Meter Company Inc., Longview, Texas (AWWA) A. Hendey Sr., Hendey Meter, Beaumont, Calif. (AWWA) M.J. Keilty, Endress + Hauser Flowtec AG, Estes Park, Colo. (AW

24、WA) R.N. Koch, Master Meter Inc., Pittsburgh, Pa. (AWWA) D.J. Kullmann, Neptune Technology Group Inc., Marietta, Ga. (AWWA) M. Laird, Metron-Farnier LLC, Boulder, Colo. (AWWA) J.F. Panek Jr., McCrometer Inc., Rowley, Iowa (AWWA) J. Pintok, RG3 Meter Company Inc., Sanford, Fla. (AWWA) J. Potter, Mast

25、er Meter Inc., Mansfield, Texas (AWWA) J.A. Reiss, Elster AMCO Water LLC, Ocala, Fla. (AWWA) M. Shamley, Metron-Farnier LLC, Boulder, Colo. (AWWA) T. Smith, Sensus, Raleigh, N.C. (AWWA) S.M. Swanson, Sensus, Uniontown, Pa. (AWWA) M.A. Thomas, Mueller Systems, Cleveland, N.C. (AWWA) W.J. Vetter, Mast

26、er Meter Inc., Mansfield, Texas (AWWA) G.M. Voss, McCrometer Inc., Hemet, Calif. (AWWA) A.M. Watson, Elster AMCO Water LLC, Ocala, Fla. (AWWA) * Liaison, nonvoting Alternate Copyright 2015 American Water Works Association. All Rights Reserved. v User Members M.L. Aigen, Boston Water and Sewer Commis

27、sion, Roxbury, Mass. (NEWWA) J. Alongi, Kansas City Water Services Department, Kansas City, Mo. (AWWA) M.J. Aragon, Denver Water, Denver, Colo. (AWWA) M.C. Bowen, City of Columbus, Division of Water, Columbus, Ohio (AWWA) W.F. Dunnill, Consolidated Utility District of Rutherford County, Murfreesboro

28、, Tenn. (AWWA) W.M. Garfield, Arizona Water Company, Phoenix, Ariz. (AWWA) D. Griffin, City of Winnipeg Water and Waste Department, Winnipeg, Man., Canada (AWWA) P.A. Hayes, Mammoth Community Water District, Mammoth Lakes, Calif. (AWWA) N.D. Kaufman, Truckee Donner Public Utility District, Truckee,

29、Calif. (AWWA) T.A. Kelly Jr., Washington Suburban Sanitary Commission, Laurel, Md. (AWWA) M.S. Krause, Desert Water Agency, Palm Springs, Calif. (AWWA) A. Land, Dallas Water Utilities, Dallas, Texas (AWWA) S.U. Mills-Wright, *Standards Council Liaison, City of Arlington, Arlington, Texas (AWWA) K.C.

30、 Molli, Veolia Water North America, Chicago, Ill. (AWWA) J.A. Novak, Milwaukee Water Works, Milwaukee, Wis. (AWWA) J.H. Standi Jr., Golden State Water Company, Fontana, Calif. (AWWA) * Liaison, nonvoting Copyright 2015 American Water Works Association. All Rights Reserved. This page intentionally bl

31、ank. Copyright 2015 American Water Works Association. All Rights Reserved. vii Contents All AWWA standards follow the general format indicated subsequently. Some variations from this format may be found in a particular standard. SEC. PAGE SEC. PAGE Foreword I Introduction . ix I.A Background ix I.B

32、History . ix I.C Acceptance x II Special Issues. xii II.A Materials . xii II.B Fire Flow . xii III Use of This Standard . xii III.A Purchaser Options and Alternatives . xii III.B Modication to Standard . xiii IV Major Revisions xiii V Comments . xiv Standard 1 General 1.1 Scope 1 1.2 Purpose . 1 1.3

33、 Application 1 2 References 2.1 Standards 2 2.2 ASTM Test Standards . 4 3 Definitions . 4 4 Requirements 4.1 Materials . 5 4.2 General Design . 9 4.3 Detailed Design 11 5 Verification 5.1 Rejection . 15 6 Delivery 6.1 Marking 15 6.2 Packaging and Shipping 15 6.3 Affidavit of Compliance 15 Appendixes

34、 A Bibliography 17 B Supplemental Information B.1 Units of Measure . 19 B.2 Tests 19 B.3 Testing Equipment 20 B.4 Registration Accuracy . 20 B.5 Periodic Tests 22 B.6 Meter Storage 23 B.7 Materials . 23 B.8 Installation 24 Tables 1 Characteristics of Displacement-Type Meters. 10 2 Dimensional Design

35、 Limits for Meters and External Connections 10 3 Maximum Indication on Initial Dial and Minimum Register Capacity . 13 B.1 Most Frequently Used Intervals Between Meter Tests 23 Copyright 2015 American Water Works Association. All Rights Reserved. This page intentionally blank. Copyright 2015 America

36、n Water Works Association. All Rights Reserved. ix Foreword This foreword is for information only and is not a part of ANSI*/AWWA C710. I. Introduction. I.A. Background. Material goods molded from plastics have been a part of everyday life for many decades, but in the early 1960s, a new group of pla

37、stics better suited to meet more demanding applications was discovered. These materials have greatly improved properties, such as strength and stiffness, and are known as engineering plastics. With the introduction of this new class of plastics, engineers were able to achieve design objectives that

38、previously had seemed almost beyond reach. The water meter industry as a whole began underwriting experiments with plastic materials as far back as the 1950s. From 1963 to 1968, two principal research pro- grams were sponsored by the meter suppliers under the auspices of the American Water Works Ass

39、ociation (AWWA) at the Armour Research Institute, Chicago, and later at Columbia University, New York City. These programs primarily focused on plastic meter main-case designs and materials. Plastic material research in the water meter industry has paid great dividends and has resulted in the design

40、 of many meter components from engineering plastics. Signicant improvements, such as corrosion resistance, dimensional stability, self- lubrication, low mass, and superior surface nishes have resulted in improved meter accuracies with longer life. When designing meter components from plastic, todays

41、 engineer has a choice of thousands of plastic compound formulations. Although many plastics appear identical, there are often vast differences in their physical properties, and it takes considerable know-how to select the one best suited for a particular application. In addition, plastics used in w

42、ater meter design often contain various enhancing or reinforcing agents to give components greater rigidity, strength, and dimensional stability. I.B. History. The extensive use of plastic in the design of plastic water meter parts was recognized in the Jan. 24, 1971, revision of ANSI/AWWA C700, Col

43、d-Water MetersDisplacement Type, Bronze Main Case. The use of synthetic polymers as an alternative material for all parts except the main case was one of the major revisions. At the 1972 AWWA annual convention, the rst domestic positive-displacement water meter with a plastic main case (rather than

44、the traditional bronze main case) was * American National Standards Institute, 25 West 43rd Street, Fourth Floor, New York, NY 10036. Copyright 2015 American Water Works Association. All Rights Reserved. x introduced. During the next 10 years, three more meter suppliers introduced plastic main-case

45、meters. The subject of plastic main-case materials not meeting the current standard was discussed at the 1974 meeting of the AWWA Meter Standards Committee. The com- mittee chairman stated that the manufacturers of these meters should initiate a request for change at the next revision. The revision

46、of ANSI/AWWA C700 in 1977 did not include synthetic polymers as an alternative main-case material because the subcommittee could not reach agree- ment. The subject was tabled to be considered at the next revision in 1982. Between 1982 and 1985, revising ANSI/AWWA C700 to include synthetic polymers a

47、s a main- case alternative became an issue. To resolve this controversy, an ad hoc committee was appointed by the Standards Council. A Mar. 4, 1985, ad hoc committee report recom- mended that the Standards Council direct the Water Meter Committee to “appoint a new subcommittee to develop a new stand

48、ard for displacement-type water meters with plastic main cases, including consideration of appropriate allowable nutation speed for this type of meter.” This recommendation was accepted by the Standards Council in June 1985. Because of the diversity of available materials and the continual developme

49、nt of new and improved materials, this standard will not specify any one material but will use the term suitable engineering plastic. For reference purposes only, typical materials used presently for water meter designs and found in ASTM* specications are cited. The rst edition of ANSI/AWWA C710 was approved by the AWWA Board of Directors Jan. 25, 1988. Subsequent editions were approved on Jan. 28, 1990, June 17, 1995, June 16, 2002, and Jan. 25, 2009. This edition was approved on Jan. 24, 2015. I.C. Acceptance. In May 1985, the US Envir