BS 2471-2005 Textiles Woven fabrics Determination of mass per unit length and mass per unit area《纺织品 机织物 单位长度质量和单位面积质量的测定》.pdf

1、BRITISH STANDARD BS 2471:2005 Textiles Woven fabrics Determination of mass per unit length and mass per unit area ICS 59.080.30 BS 2471:2005 This British Standard was published under the authority of the Standards Policy and Strategy Committee on 4 May 2005 BSI 4 May 2005 First published April 1954

2、Second edition February 1971 Third edition February 1978 Fourth edition May 2005 The following BSI references relate to the work on this standard: Committee reference TCI/24 Draft for comment DC04/30091536 ISBN 0 580 45858 X Committees responsible for this British Standard The preparation of this Br

3、itish Standard was entrusted to Technical Committee TCI/24, Physical testing of textiles, upon which the following bodies were represented: Association of Consulting Scientists Association of Suppliers to the British Clothing Industry British Apparel and Textile Confederation British Measurement and

4、 Testing Association British Textile Machinery Association British Textile Technology Group Defence Procurement Agency Furniture Industry Research Association S A T R A Technology Centre Society of Dyers and Colourists Textile Institute UK Textile Laboratories Forum Woolmark Company Co-opted members

5、 Amendments issued since publication Amd. No. Date Text affectedBS 2471:2005 BSI 4 May 2005 i Contents Page Committees responsible Inside front cover Foreword ii 1S c o p e 1 2 Normative references 1 3 Principle 1 4 Apparatus 2 5 Atmosphere for conditioning and testing 2 6 Procedure 2 7 Calculation

6、of results 3 8 Test report 4 Bibliography 5BS 2471:2005 ii BSI 4 May 2005 Foreword This British Standard has been prepared by Technical Committee TCI/24. It supersedes BS 2471:1978, which is withdrawn. The original version of this British Standard was identical to ISO 3801:1977, which was prepared b

7、y ISO Technical Committee ISO/TC 38 with the active participation of the UK. BS 2471:1978 was partially replaced by BS EN 12127:1997, which will remain current on the publication of this revision of BS 2471. BS 2471 covers ISO 3801:1977, Clauses 1 to 4; the measurement of mass per unit area using sm

8、all samples is covered by BS EN 12127 and is therefore no longer covered by BS 2471. This is a full revision of the standard. The principal changes from the previous edition are as follows. a) In Clause 3, the different options available for the measurement of mass per unit length and mass per unit

9、area of fabric pieces are laid out more clearly, and with an outline of each method, to enable the user of the standard to select the appropriate procedure for their particular fabric and circumstances. b) The procedural sections have been ordered more logically to enable the user to carry out the p

10、rocedure by following the steps in a chronological manner. c) Some references to the “small sample” method of measuring mass per unit area have been removed. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Co

11、mpliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, pages i and ii, pages 1 to 5 and a back cover. The BSI copyright notice displayed in this document indicates when the document wa

12、s last issued.BS 2471:2005 BSI 4 May 2005 1 Introduction The mass per unit length and mass per unit area of a fabric can be determined in more than one way. For some fabrics, mass per unit length and mass per unit area are related simply by the width of the fabric, but for other fabrics variations i

13、n structure (whether in the selvedges or in the body of the fabric) can introduce an important distinction between mass per unit length and mass per unit area. It is important, therefore, to consider all the possible methods and to choose one that is appropriate to the fabric. A choice also needs to

14、 be made between test methods suitable for samples or specimens of cloth (i.e. short lengths or cuttings) and those suitable for application to fabric in bulk, i.e. in the piece (the normal unit of production). No method is so much more accurate than the others as to justify its being set up as the

15、sole standard method. Specific circumstances should, therefore, govern choices between mass per unit length and mass per unit area and between a method applicable to samples and a method applicable to pieces. 1 Scope This British Standard gives methods for the determination of: a) mass per unit leng

16、th; and b) mass per unit area of woven fabrics that have been in the standard atmosphere for testing. The methods are applicable to woven fabrics (including those of the “stretch” type) made up full width or folded down the middle, and apply to the determination of the fabric mass of complete pieces

17、 as well as of sample lengths. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) appl

18、ies. BS EN 1773, Fabrics Determination of width and length. BS EN ISO 139, Textiles Standard atmospheres for conditioning and testing. 3 Principle 3.1 Method 1 Measurement on short samples or cuttings that can be conditioned in the standard atmosphere for testing After conditioning, the length and t

19、he mass of the fabric are determined and the mass per unit length calculated, or the length, width, and mass of the fabric are determined and the mass per unit area calculated, as required. 3.2 Method 2 Measurement on bulk pieces that can be conditioned in the standard atmosphere for testing After c

20、onditioning, the length and the mass of the whole piece of fabric are determined and the mass per unit length calculated, or the length, width, and mass of the fabric are determined and the mass per unit area calculated, as required. 3.3 Method 3 Measurement on bulk pieces that cannot be conditioned

21、 in the standard atmosphere for testing When it is impracticable to condition the whole piece in the standard atmosphere for testing, the length (and width) and the mass of the piece are determined after relaxation in the prevailing atmosphere, and a correction factor is applied to give the conditio

22、ned values. The conditioned mass per unit length (or mass per unit area) is then calculated. The correction factor is determined by comparison of the length (and width) and the mass of a specific portion cut from the piece after relaxation, measured firstly in the ambient atmosphere and then in the

23、standard atmosphere for testing. BS 2471:2005 2 BSI 4 May 2005 4 Apparatus 4.1 Calibrated steel rule of length not less than 2 m, graduated in centimetres and millimetres. NOTE The rule should preferably be 3 m in length. 4.2 Device to enable a specimen of full width to be cut at right angles to the

24、 selvedge. 4.3 Balance, capable of determining the mass of pieces or sample lengths (as relevant) to an accuracy of 0.2 % of the determined mass. 4.4 Table, having a smooth flat surface, a width greater than that of the woven fabric to be measured and a length of not less than 4 m. 5 Atmosphere for

25、conditioning and testing The atmosphere for conditioning and testing textiles shall be in accordance with BS EN ISO 139. Pre-conditioning shall be carried out as described in BS EN ISO 139, unless it is known that the fabric, as received, can be conditioned from the “dry side”. Equilibrium with the

26、pre-conditioning or conditioning atmosphere shall be deemed to have been reached when the difference between successive weighings, made at intervals of not less than 2 h, does not exceed 0.5 % of the final mass of the fabric when conditioned in this atmosphere. 6 Procedure 6.1 Selvedges If the mass

27、per unit length (or area) of the selvedge differs appreciably from the mass per unit length (or area) of the fabric, the mass per unit area shall be determined on a sample from which the selvedges have been removed along the outermost warp threads of the body, and calculation(s) shall be based on th

28、e mass of the trimmed sample and its length and width. 6.2 Method 1: Measurement on short samples or cuttings that can be conditioned in the standard atmosphere for testing 6.2.1 Ensure that the fabric is cut across the full width of the piece along parallel lines at right angles to the selvedge and

29、 that the length of the sample is not less than 0.5 m and preferably 3 m to 4 m. 6.2.2 Condition the sample or cutting in accordance with Clause 5. 6.2.3 Determine the conditioned length of the sample in accordance with BS EN 1773. 6.2.4 If the mass per unit area is required, determine the condition

30、ed width of the sample in accordance with BS EN 1773. 6.2.5 Determine the conditioned mass of the sample. 6.2.6 Calculate the mass per unit length in accordance with 7.2, or mass per unit area in accordance with 7.3, as required. 6.3 Method 2: Measurement on bulk pieces that can be conditioned in th

31、e standard atmosphere for testing 6.3.1 Condition the whole piece in accordance with Clause 5. 6.3.2 Determine the conditioned length of the piece in accordance with BS EN 1773. 6.3.3 If the mass per unit area is required, determine the conditioned width of the piece in accordance with BS EN 1773. 6

32、.3.4 Determine the conditioned mass of the whole piece. 6.3.5 Calculate the mass per unit length in accordance with 7.2, or mass per unit area in accordance with 7.3, as required.BS 2471:2005 BSI 4 May 2005 3 6.4 Method 3: Measurement on bulk pieces that cannot be conditioned in the standard atmosph

33、ere for testing 6.4.1 Ensure that the whole piece is in the relaxed state in the ambient atmosphere. 6.4.2 Determine the length of the piece in the ambient atmosphere in accordance with BS EN 1773. 6.4.3 If the mass per unit area is required, determine the width of the piece in the ambient atmospher

34、e in accordance with BS EN 1773. 6.4.4 From preferably the middle of the piece, cut a full-width sample of length not less than 1 m and preferably 3 m to 4 m. 6.4.5 Determine the length of the sample in the ambient atmosphere in accordance with BS EN 1773. 6.4.6 If the mass per unit area is required

35、, determine the width of the sample in the ambient atmosphere in accordance with BS EN 1773. 6.4.7 Determine the mass of the whole piece, and also the mass of the sample at the same time, to minimize the effect of any sudden changes in the temperature or humidity of the ambient atmosphere. 6.4.8 Con

36、dition the sample in accordance with Clause 5. 6.4.9 Determine the conditioned length and mass of the sample and, if the mass per unit area is required, its conditioned width. 6.4.10 Calculate the conditioned length, width (if mass per unit area required) and mass of the whole piece in accordance wi

37、th 7.1. Then calculate the mass per unit length in accordance with 7.2, or mass per unit area in accordance with 7.3, as required. 7 Calculation of results 7.1 Conditioned length, width (if mass per unit area is required) and mass (Method 3 only) For Method 3 only, first calculate the conditioned le

38、ngth, width (if mass per unit area required) and mass of the piece using equations 1 to 3. where: L cis the conditioned length of the piece, in metres (m); L ris the relaxed length of the piece, in metres (m); L scis the conditioned length of the sample, in metres (m); L sris the relaxed length of t

39、he sample, in metres (m). where: W cis the conditioned width of the piece, in metres (m); W ris the relaxed width of the piece, in metres (m); W scis the conditioned width of the sample, in metres (m); W sris the relaxed width of the sample, in metres (m). (1) (2) L c L r L sc L sr - = W c W r W sc

40、W sr - =BS 2471:2005 4 BSI 4 May 2005 where: M cis the conditioned mass of the piece, in grams (g); M ris the mass of the piece in the ambient atmosphere, in grams (g); M scis the conditioned mass of the sample, in grams (g); M sris the mass of the sample in the ambient atmosphere, in grams (g). 7.2

41、 Mass per unit length For all methods, calculate the mass per unit length (if required) using equation 4. where: L cis the conditioned length of the piece or sample, in metres (m); M cis the conditioned mass of the piece or sample (with or without selvedges as relevant), in grams (g); M ulis the mas

42、s per unit length, in grams per metre (g/m). 7.3 Mass per unit area For all methods, calculate the mass per unit area (if required) using equation 5. where: L cis the conditioned length of the piece or sample, in metres (m); M cis the conditioned mass of the piece or sample, in grams (g); Mua is the

43、 mass per unit area, in grams per square metre (g/m 2 ); W cis the conditioned width of the piece or sample, in metres (m). 8 Test report The test report shall include the following particulars: a) a statement that the test was performed in accordance with this British Standard, i.e. BS 2471:2005; b

44、) where more than one specimen is tested, the result for each specimen; c) the date of the test; d) the mean mass per unit length, in grams per metre, and/or area, in grams per square metre; e) the method (1, 2, 3) by which each result was obtained; f) whether or not the results include the selvedge

45、; g) details of any deviation from the specified test procedure.(3) (4) (5) M c M r M sc M sr - = M ul M c L c - = M ua M c L c W c - =BS 2471:2005 BSI 4 May 2005 5 Bibliography BS EN 12127:1998, Textiles Fabrics Determination of mass per unit area using small samples. ISO 3801:1977, Methods of test

46、 for textiles Woven fabrics Determination of mass per unit length and mass per unit area.BS 2471:2005 BSI 389 Chiswick High Road London W4 4AL BSI British Standards Institution BSI is the independent national body responsible for preparing British Standards. It presents the UK view on standards in E

47、urope and at the international level. It is incorporated by Royal Charter. Revisions British Standards are updated by amendment or revision. Users of British Standards should make sure that they possess the latest amendments or editions. It is the constant aim of BSI to improve the quality of our pr

48、oducts and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel: +44 (0)20 8996 9000. Fax: +44 (0)20 8996 7400

49、. BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards. Buying standards Orders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel: +44 (0)20 8996 9001. Fax: +44 (0)20 8996 7001. Email: ordersbsi-. Standard