1、BRITISH STANDARD BS2655-7: 1970 Incorporating Amendment Nos. 1 and 2 Specification for Lifts, escalators, passenger conveyors and paternosters Part 7: Testing and inspection UDC 621.876.3BS2655-7:1970 This British Standard, having beenapproved by the MechanicalEngineering IndustryStandards Committee
2、,was published underthe authority of the Executive Board on 23October1970 BSI 09-1999 The following BSI references relate to the work on this standard: Committee reference MEE/49 Draft for comment69/27791 ISBN 580 06473 5 Co-operating organizations The Mechanical Engineering Industry Standards Commi
3、ttee, under whose supervision this British Standard was prepared, consists of representatives from the following Government departments and scientific and industrial organizations: Associated Offices Technical Committee* Institution of Civil Engineers Association of Consulting Engineers Institution
4、of Gas Engineers Association of Mining Electrical and Institution of Heating and Ventilating Mechanical Engineers Engineers Board of Trade Institution of Mechanical Engineers* British Chemical Plant Manufacturers Institution of Mechanical Engineers Association (Automobile Division) British Compresse
5、d Air Society Institution of Production Engineers British Electrical and Allied Manufacturers Locomotive and Allied Manufacturers Association* Association of Great Britain British Gear Manufacturers Association London Transport Executive* British Internal Combustion Engine Machine Tool Trade Associa
6、tion Manufacturers Association Ministry of Defence British Mechanical Engineering Ministry of Defence, Army Department Confederation* Ministry of Public Building and Works* British Pump Manufacturers Association Ministry of Technology* British Steel Industry Ministry of Technology National Crown Age
7、nts for Oversea Governments and Engineering Laboratory Administrations Ministry of Transport Department of Employment and Productivity* National Coal Board Electricity Council, the Central Electricity National Physical Laboratory (Ministry Generating Board and the Area Boards of Technology) in Engla
8、nd and Wales Royal Institute of British Architects Engineering Equipment Users Association* Water-tube Boilermakers Association Gas Council The Government departments and scientific and industrial organizations marked with an asterisk in the above list, together with the following, were directly rep
9、resented on the committee entrusted with the preparation of this British Standard: British Railways Board Fire Offices Committee County Councils Association Greater London Council Department of Health and Social Security Institution of Electrical Engineers Draughtsmens and Allied Technicians Institu
10、tion of Municipal Engineers Association Mechanical Handling Engineers Association Electrical, Electronic, Telecommunications Ministry of Housing and Local Government and Plumbing Trades Union National Association of Lift Makers Engineers Surveyors Association Post Office Federation of Wire Rope Manu
11、facturers of Retail Trading Standards Association Great Britain Amendments issued since publication Amd. No. Date ofissue Comments 1574 October 1974 3018 May1979 Indicated by a sideline in the marginBS2655-7:1970 BSI 09-1999 i Contents Page Co-operating organizations Inside front cover Foreword ii 1
12、 Scope 1 2 Test and examination 1 3 High voltage test (at makers works) 1 4 Electrical tests (after installation) 2 Appendix A Type of certificate required for test and examination after installation of electric lifts for passengers and goods 3 Appendix B Type of certificate required for test and ex
13、amination after installation of hydraulic lifts for passengers and goods 8 Appendix C Type of certificate required for test and examination after installation of power operated and hand-powered service lifts 13 Appendix D Type of certificate required for test and examination after installation of es
14、calators and passenger conveyors 18 Appendix E Type of certificate required for test and examination after installation of paternosters 20 Appendix F Type of certificate required for periodic examination of electric, hydraulic and hand-powered lifts and paternosters 23 Appendix G Type of certificate
15、 required for periodic examination of escalators and passenger conveyors 26BS2655-7:1970 ii BSI 09-1999 Foreword This standard makes reference to the following British Standard: BS2613, The electrical performance of rotating electrical machinery. This British Standard, prepared under the authority o
16、f the Mechanical Engineering Industry Standards Committee, is a revision of and supersedes the1958 edition, which was entitled “Electric lifts”. The new title reflects the extension of the scope of this British Standard. Amendments to Parts2 and 3 of this standard have been published, and implement
17、the change in title. The revised Part1 and additional new parts are being published separately and, together with Parts2 and 3, are as follows: Part 1: General requirements for electric, hydraulic and hand-powered lifts. This Part is basically a revision of the1958 edition of BS2655-1, without the b
18、uilding requirements and list of definitions, and extended to cover the engineering and safety requirements for new hydraulic and hand-powered lifts as well as for new electric lifts. Part 2: Single speed polyphase induction motors for driving lifts. This Part covers the type of electric motor speci
19、ally designed for driving lifts. It should be used in conjunction with BS2613 1)and gives additional requirements including the class of lift rating and special limits of temperature rise. Part 3: Arrangements of standard electric lifts. This part gives standard dimensions for lift wells and machine
20、 rooms in relation to life capacity and platform sizes, for seven classes of lifts. Part 4: General requirements for escalators and passenger conveyors. This Part specifies engineering and safety requirements for escalators and passenger conveyors. The latter may be described as machines in which th
21、e passenger carrying surface remains parallel to the direction of motion and are uninterrupted. Part 5: General requirements for paternosters. This Part specifies engineering and safety requirements for paternosters which may be described as machines where series of cars are continuously running in
22、closed loops, and are characterized by the car floors remaining substantially horizontal when the direction of motion is reversed at the extremities of car travel. Part 6: Building construction requirements. This Part specifies structural and fire resistance requirements for the equipment covered by
23、 Parts1, 4 and 5. Part 7: Testing and inspection. This Part specifies tests, examination and certification of new and modified equipment covered by Parts1, 4 and 5. Part 8: Modernization or reconstruction of lifts. This Part specifies engineering and safety requirements. Part 9: Definitions. This Pa
24、rt gives definitions of terms used in the remainder of the standard. Part 10: General requirements for guarding. This part specifies requirements for the guarding of moving parts and protection against hazards from electrical equipment. It relates to equipment covered in Parts1, 4 and 5. CP 407:1972
25、, British Standard Code of Practice for electric, hydraulic and hand-powered lifts. The code gives general information and guidance for planning, purchasing, installation and maintenance of passenger, goods and service lifts. In case of difficulty in classifying any equipment in accordance with the
26、headings of Parts1, 4 and 5, reference should be made to the relevant definitions in Part9. This part of the standard covers examination and certification of new seeAmendment No.2(May1979) and modified equipment covered by Parts1, 4 and 5. It is principally concerned with safety. 1) BS2613, “The ele
27、ctrical performance of rotating electrical machinery”.BS2655-7:1970 BSI 09-1999 iii It extends the scope of the tests which were included in the1958 edition of the standard, and the types of certificate now included require that assurances of satisfactory performance from certain aspects be given to
28、gether with certain contract and performance data. The certificates also require that the equipment to which they relate shall comply with all the relevant requirements of the standard. However, an “Exemption” clause is included for non-compliance where this is acceptable to the Certification Author
29、ity and other affected parties, such as the user. It is envisaged that a Central Certification Authority might be set up, but in the interim the authority for signing the certificate will be one acceptable to the parties concerned (such as the manufacturer, user, insurance company and appropriate sa
30、fety authority). In many cases this will in practice be a representative of the manufacturer. Appendix A and Appendix F of this Part of this standard are rendered obsolescentconcurrently with the publication of BS5655 “Lifts and service lifts” Part 1:1979 “Safety rules for the construction and insta
31、llation of electriclifts”, under the conditions stated below. 1) This standard is no longer applicable to all new lifts installed in such new buildings as are designed after the date of publication of BS5655-1(31May1979). 2) All new lifts ordered after31 May1979, for installation in such buildings a
32、s have not yet been commenced but for which final plans existed before31 May1979, should be constructed preferably in accordance with BS5655-1 or, if space considerations make it necessary, in accordance with this standard. If, however, such lift installations are scheduled for commissioning after31
33、 May1984, the requirements of BS5655-1 only are applicable. 3) All new lifts ordered after31 May1979, for installation in such new buildings as were under construction or completed before that date, are permitted to be constructed in accordance with either this standard or BS5655-1. If, however, suc
34、h lift installations are scheduled for commissioning after31 May1984, the requirements of BS5655-1 only are applicable unless it can be shown that, owing to space limitations, compliance is not reasonably practicable. 4) Such new replacement lifts and major modifications to existing lifts as are com
35、missioned before31 May1984, for use in existing buildings that were built before31 May1979, are permitted to be in accordance with either this standard or BS5655-1. After31 May1984, the requirements of BS5655-1 only are applicable unless it can be shown that, owing to space limitations, compliance i
36、s not reasonably practicable. Special provisions are permissible to meet certain site conditions often present in buildings that have been in use for many years. It is intended that the use of new equipment should not automatically be restricted because certain site conditions are now more rigorous
37、than formerly. Appendix F of BS2655-7:1970 will, however, continue to be applicable to the future maintenance and inspection of existing electric lift installations constructed in accordance with BS2655. Appendix A and Appendix F. Appendix A and Appendix F of this Part of this standard should be end
38、orsed: This appendix is rendered obsolescent under the conditions stated in the foreword (See Amendment No. 2).BS2655-7:1970 iv BSI 09-1999 A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct applicat
39、ion. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, pagesi toiv, pages1to27 and a back cover. This standard has been updated (see copyright date) and may have had amendments
40、incorporated. This will be indicated in the amendment table on the inside front cover.BS2655-7:1970 BSI 09-1999 1 1 Scope This Part of this British Standard specifies requirements for the testing and examination of new and modified equipment covered by Parts1, 4 and 5 of the standard. The standard d
41、ifferentiates between testing and examination at the time of commissioning, and subsequent periodic examinations. The types of certificate to show compliance with the standard are included, and cover construction, certain aspects of performance, and contract data. Evidence of test certificates relat
42、ing to certain components of the equipment is also specified. 2 Test and examination 2.1 Test and examination after installation 2.1.1 The performance of certain tests, as required to complete the appropriate test and examination certificate (see2.1.2), shall be undertaken for every installation bef
43、ore it is put into normal service, i.e.at the time of commissioning. Tests, as specified in Clauses3 and4 shall also be undertaken. A thorough inspection of all the equipment shall also be undertaken at this stage, and the appropriate certificate shall be completed in all respects. 2.1.2 For each ty
44、pe of equipment covered by this standard, the form of the appropriate test and examination certificate referred to in2.1.1 shall be as follows: 2.2 Periodic examination 2.2.1 Every installation shall be examined within six months of commissioning, and thereafter at intervals not exceeding six months
45、, the examinations being adequate to complete the appropriate certificate (see2.2.2) in all respects. 2.2.2 For each type of equipment covered by this standard, the form of the appropriate examination certificate referred to in2.2.1 shall be as follows: 2.3 Component testing. Evidence of test certif
46、icates relating to some components is required to complete certain parts of the certificates dealing with static examinations, and these test certificates may relate to individual or type tests carried out by the component manufacturer, or the lift, escalator, passenger conveyor or paternoster manuf
47、acturer, or an independent body. 2.4 Availability of certificates. Copies of certificates appropriate to each type of equipment covered by this standard, as referred to in2.1.2 and2.2.2, shall be available for inspection at all times at the location of the equipment. 2.5 Test facilities. All test we
48、ights, instruments and personnel to complete the testing and inspection after installation (see2.1) shall be provided by the manufacturer. A power supply, at the declared voltage and frequency, for test and adjustment purposes, shall be provided by the purchaser. 3 High voltage test (at makers works
49、) The dielectric of electrical apparatus (excluding motors, generators, transformers, electronic apparatus and instruments, which should be tested in accordance with the appropriate British Standard), shall be capable of withstanding a test voltage of ten times the working voltage, with a maximum of2000V, when applied as follows: 1) Between the live parts and the case or the frame with all circuits completed. 2) Between main terminals or equivalent parts with all circuits open. 3) Between any live parts of independent circuits. The test voltage should be alterna
copyright@ 2008-2019 麦多课文库（www.mydoc123.com）网站版权所有
备案/许可证编号：苏ICP备17064731号-1