BS 3087-1-1991 Pliers and nippers - General introduction《夹扭钳与剪断钳 第1部分 总则》.pdf

1、BRITISH STANDARD BS3087-1: 1991 Incorporating Amendment No.1 Pliers and nippers Part 1: General introductionBS3087-1:1991 This British Standard, having been prepared under the directionof the Machine, Engineers and Hand Tools Standards Policy Committee, waspublished under the authorityof the Standar

2、ds Boardand comes into effect on 31 May1991 BSI09-1999 The following BSI references relate to the work on this standard: Committee reference MTE/15 Draft for comment87/71373 DC ISBN 0 580 17989 3 Committees responsible for this British Standard The preparation of this British Standard was entrusted

3、by the Machine, Engineers and Hand Tools Standards Policy Committee (MTE/-) to Technical Committee MTE/15, upon which the following bodies were represented: British Coal Corporation British Telecommunications plc Consumer Policy Committee of BSI Department of Trade and Industry Mechanical Engineerin

4、g and Manufacturing Technology Division (Mmt) Electricity Supply Industry in England and Wales Engineering Equipment and Materials Users Association Federation of British Engineers Tool Manufacturers Federation of British Hand Tool Manufacturers Handle Manufacturers Association Institute of Carpente

5、rs Institution of Production Engineers Ministry of Defence The following body was also represented in the drafting of the standard, through subcommittees and panels: National Association of Tool Dealers Amendments issued since publication Amd. No. Date Comments 8045 February1994 Indicated by a sidel

6、ine in the marginBS3087-1:1991 BSI 09-1999 i Contents Page Committees responsible Inside front cover Foreword ii 1 Scope 1 2 General 1 3 List of Parts 1 Publication(s) referred to Inside back coverBS3087-1:1991 ii BSI 09-1999 Foreword This revision of this British Standard has been prepared under th

7、e direction of the Machine, Engineers and Hand Tools Standards Policy Committee. This Part of BS3087 is Part1 of the series of14 new or revised Parts being issued. BS3087:1959 will then be superseded and withdrawn. A British Standard does not purport to include all the necessary provisions of a cont

8、ract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, pagesi andii, pages1 and2, an inside back cover

9、 and a back cover. This standard has been updated (see copyright date) and may have had amendments incorporated. This will be indicated in the amendment table on the inside front cover.BS3087-1:1991 BSI 09-1999 1 1 Scope This Part of BS3087 gives an index and general introduction to the Parts of thi

10、s British Standard for pliers, pincers and nippers. NOTEThe titles of the publications referred to in this standard are listed on the inside back cover. 2 General 2.1 Objects of the standard This standard presents a simplified range of types and sizes of pliers, pincers and nippers which should be s

11、uitable for most everyday applications. A minimum standard of quality of the tools is ensured so that they will have a useful life. 2.2 Quality considerations The duties required of a pair of pliers, pincers or nippers are often severe. There are, for example, many fields in which it is necessary fo

12、r them to be able to cut hard steel wire, soft copper wire and cotton with equal facility. Many experiments and developments are currently taking place on the material for, and heat-treatment of, these tools and so the quality of the tools is ensured by stringent performance tests. These test requir

13、ements have been designed to simulate the function of the tool in normal average use. 2.3 Insulated pliers and nippers used for live circuit working The general requirements for insulated pliers, used for live circuit working, are given in IEC900. Reference should also be made to the Electricity Sup

14、ply Industry (ESI) standard26-3, “Hand held insulated tools for live working up to1000 volts”. 1) NOTEIt is now common practice to supply pliers fitted with plastics sleeving. It should not be assumed that these pliers provide any measure of protection for live circuit working. 3 List of Parts This

15、British Standard closely follows, but is not always technically equivalent to, standards adopted by the International Organization for Standardization (ISO). It is divided into the following Parts. Part1: General introduction; Part2: Nomenclature (see ISO5742); Part3: Specification for general requi

16、rements (see ISO5743); Part4: Methods of test (technically equivalent to ISO5744); Part5: Specification for dimensions of pliers for gripping and manipulating (see ISO5745); Part6: Specification for dimensions of engineers and linemans pliers (see ISO5746); Part7: Specification for dimensions of lev

17、er assisted side cutting pliers, end and diagonal cutting nippers (see ISO5747); Part8: Specification for dimensions of end cutting nippers (see ISO5748); Part9: Specification for dimensions of diagonal cutting nippers (see ISO5749); Part10: Specification for dimensions of tools not standardized by

18、ISO; Part11: Specification for dimensions and test values of slip joint pliers (see ISO9343); Part12: Specification for dimensions and test values of construction workers pincers (seeISO9242); Part13: Specification for dimensions and test values of carpenters pincers (see ISO9243); Part14: Specifica

19、tion for dimensions and test values of multiple slip joint pliers (see ISO8976). NOTEAdditional requirements for electronic pliers are given in BS7330, BS7330-1, BS7330-2, BS7330-3, BS7330-4 and BS7330-5. 1) Available from Electricity Association,30 Millbank Place, London SW1P4RD, Tel:0713445700.2 b

20、lankBS3087-1:1991 BSI 09-1999 Publication(s) referred to BS7330, Pliers and nippers for electronics. BS7330-1, Nomenclature. BS7330-2, Specification for general requirements. BS7330-3, Methods of test. BS7330-4, Specification for dimensions of single-purpose pliers for gripping and manipulating. BS7

21、330-5, Specification for dimensions of single-purpose cutting nippers. IEC900, Hand tools for live working up to1000V a.c. and1500V d.c. Electricity Supply Industry (ESI) standard26-3, “Hand held insulated tools for live working up to1000volts”.BS3087-1: 1991 BSI 389 Chiswick High Road London W4 4AL

22、 BSIBritishStandardsInstitution BSI is the independent national body responsible for preparing BritishStandards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter. Revisions BritishStandards are updated by amendment or revision. Users

23、of BritishStandards should make sure that they possess the latest amendments or editions. It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this BritishStandard would inform the Secretary o

24、f the technical committee responsible, the identity of which can be found on the inside front cover. Tel:02089969000. Fax:02089967400. BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards. Buying standards

25、 Orders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel:02089969001. Fax:02089967001. In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as BritishStandards

26、, unless otherwise requested. Information on standards BSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give details on all

27、its products and services. Contact the Information Centre. Tel:02089967111. Fax:02089967048. Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of these and other benefits contact Membership Adm

28、inistration. Tel:02089967002. Fax:02089967001. Copyright Copyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the international standardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be repro

29、duced, stored in a retrieval system or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI. This does not preclude the free use, in the course of implementing the standard, of necessary details such as symbols, and size,

30、type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. If permission is granted, the terms may include royalty payments or a licensing agreement. Details and advice can be obtained from the Copyright Manager. Tel:02089967070.