BS 3182-4-1978 Textile machinery and accessories healds heald frames and reeds - Specification for metal reeds with plate baulk dimensions《纺织机械与附件 综片、综框与钢筘 第4部分 片式筘梁金属筘尺寸规范》.pdf

1、BRITISH STANDARD BS 3182-4: 1978 ISO 367:1976 Textile machinery and accessories: healds,heald frames and reeds Part 4: Specification for metal reeds with plate baulk: dimensions ISO title: Textile machinery and accessories Metal reeds with plate baulk Dimensions UDC 677.054.845.2BS3182-4:1978 This B

2、ritish Standard, having been prepared under the directionof the Textile MachineryStandards Committee,was published underthe authority of the Executive Board on 31January1978 BSI 12-1999 First published as BS 3182 December 1959 First revision September 1969 Second revision as BS 3182-4 January 1978 T

3、he following BSI references relate to the work on this standard: Committee reference TMT/69 Letter of intent 77/35487 ISBN 0 580 09769 2 Cooperating organizations The Textile Machinery Standards Committee, under whose direction this British Standard was prepared, consists of representatives from the

4、 following Government department and scientific and industrial organizations: British Textile Employers Association British Textile Machinery Association* Health Part 2: implementing ISO 365:1976 “Textile machinery and accessories Twin wire healds for Jacquard weaving Dimensions”; Part 3: implementi

5、ng ISO 568:1976 “Textile machinery and accessories Heald frames for single or double row of healds Designation of dimensions”; Part 5: implementing ISO 571:1976 “Textile machinery and accessories Metal reeds with double-spring baulk Dimensions”. Additional Parts may be added following the publicatio

6、n of further suitable International Standards. Terminology and conventions. The text of the International Standard has been accepted as suitable for publication, without deviation, as a British Standard. Certain terminology and conventions are used, however, that are not identical with those used in

7、 British Standards. Attention is therefore drawn to the following. Where the words “International Standard”, relating to this publication, appear, they should be interpreted as “British Standard”. The comma has been used as a decimal marker. In British Standards it is current practice to use a full

8、point (a full stop on the baseline) as the decimal marker. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from l

9、egal obligations. Summary of pages This document comprises a front cover, an inside front cover, pages i and ii, pages1 and 2 and a back cover. This standard has been updated (see copyright date) and may have had amendments incorporated. This will be indicated in the amendment table on the inside fr

10、ont cover.BS3182-4:1978 BSI 12-1999 1 1 Scope and field of application This International Standard specifies the dimensions of metal reeds with plate baulk for use in the textile industry.BS3182-4:1978 2 BSI 12-1999 2 DimensionsblankBS 3182-4: 1978 ISO367:1976 BSI 389 Chiswick High Road London W4 4A

11、L BSIBritishStandardsInstitution BSI is the independent national body responsible for preparing BritishStandards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter. Revisions BritishStandards are updated by amendment or revision. Users

12、 of BritishStandards should make sure that they possess the latest amendments or editions. It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this BritishStandard would inform the Secretary

13、of the technical committee responsible, the identity of which can be found on the inside front cover. Tel:02089969000. Fax:02089967400. BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards. Buying standard

14、s Orders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel:02089969001. Fax:02089967001. In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as BritishStandard

15、s, unless otherwise requested. Information on standards BSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give details on all

16、 its products and services. Contact the Information Centre. Tel:02089967111. Fax:02089967048. Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of these and other benefits contact Membership Ad

17、ministration. Tel:02089967002. Fax:02089967001. Copyright Copyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the international standardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be repr

18、oduced, stored in a retrieval system or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI. This does not preclude the free use, in the course of implementing the standard, of necessary details such as symbols, and size,

19、 type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. If permission is granted, the terms may include royalty payments or a licensing agreement. Details and advice can be obtained from the Copyright Manager. Tel:02089967070.