1、BRITISH STANDARD BS3618-7: 1973 Glossary of Mining terms Section7: Electrical engineering and lighting UDC 001.4:622BS3618-7:1973 This BritishStandard, having been approved by the Mining andQuarrying Requisites Industry Standards Committee,was published underthe authorityof the Executive Boardon 8Oc
2、tober1973 BSI12-1999 First published July1965 First revision October1973 The following BSI references relate to the work on this standard: Committee reference MQE/17 Draft for approval71/41860 ISBN 0 580 07457 9 Co-operating organizations The Mining and Quarrying Requisites Industry Standards Commit
3、tee, underwhose supervision this BritishStandard was prepared, consists of representatives from the following Government department and scientific andindustrial organizations: Association of Mining Electrical and Mechanical Engineers* British Electrical and Allied Manufacturers Association British S
4、teel Industry Council of Underground Machinery Manufacturers Department of Trade and Industry* Engineering Equipment Users Association Federation of Manufacturers of Construction Equipment and Cranes Institute of Quarrying Institution of Mechanical Engineers Institution of Mining Engineers* Mechanic
5、al Handling Engineers Association National Coal Board* The Government department and industrial organizations marked with anasterisk in the above list, together with the following, were directly represented on the committee entrusted with the preparation of this BritishStandard: Institution of Minin
6、g and Metallurgy University of Birmingham University of London University of Nottingham Amendments issued since publication Amd. No. Date of issue CommentsBS3618-7:1973 BSI 12-1999 i Contents Page Co-operating organizations Inside front cover Foreword ii 7.1 Electrical engineering 1 7.2 Lighting 4 P
7、ublication referred to Inside back coverBS3618-7:1973 ii BSI 12-1999 Foreword This glossary has been prepared, under the authority of the Mining and Quarrying Requisites Industry Standards Committee, in order to standardize and to co-ordinate the technical terms in current use in mining in the Unite
8、d Kingdom. Although the majority of the terms defined in the original edition of this glossary were primarily concerned with coal mining, account has been taken of terms used in other forms of mining and of quarrying. The need for this glossary arose from the widely varying interpretation of terms u
9、sed within the industry, and the prevalent use of more than one synonym, some purely local in origin, to indicate specific meanings. The glossary has been issued in a number of sections, according to subject matter, as follows: Section1: Planning and surveying; Section2: Ventilation; Section3: Borin
10、g and exploration; Section4: Drainage; Section5: Geology; Section6: Drilling and blasting; Section7: Electrical engineering and lighting; Section8: Winning and working; Section9: Shafts and associated equipment; Section10: Transport; Section11: Strata control. In the normal process of periodical rev
11、iew of the BS3618 publications it was seen that a number of modifications were desirable to Section7, “Electrical engineering and lighting”; therefore, since the initial edition was dated1965, it was decided to publish a revision incorporating these changes. In compiling the glossary account has bee
12、n taken of the fact that terms primarily associated with coal are separately defined in BS3323, “Glossary of coal terms”, and terms relating to coal preparation are defined in BS3552, “Glossary of terms used in coal preparation”. The following factors also have applied in the statement, selection an
13、d definition of terms: 1) Where two or more terms are grouped together, the term which is favoured is printed first and in heavy type. It is hoped that such preferred terms will gradually displace the non-preferred terms. The non-preferred terms of a group are printed in smaller type. Where the use
14、of any term is considered to be undesirable it is marked deprecated. 2) Generally, only terms which have a specific meaning in this field have been included. Where a technical term has an accepted meaning in other fields of engineering it has been omitted; the few exceptions are terms which are of p
15、articular importance in mining. 3) Purely local terms are not defined, but those of sufficient importance are included as non-preferred terms. 4) Obsolete terms are excluded.BS3618-7:1973 BSI 12-1999 iii A British Standard does not purport to include all the necessary provisions of a contract. Users
16、 of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, pagesi to iv, pages1to4, an inside back cover and a back c
17、over. This standard has been updated (see copyright date) and may have had amendments incorporated. This will be indicated in the amendment table on the inside front cover.iv blankBS3618-7:1973 BSI 12-1999 1 7.1 Electrical engineering Term Definition approved apparatus Apparatus, not necessarily fla
18、meproof or intrinsically safe, which has been approved under Government authority for use in mines and quarries. automatic control Control by means of any device other than a manually operated switch orpush-button. backing-out switch A switch applied to winders and man-riding haulages which allows t
19、he control circuit to be energized, in order to move the conveyance out of anoverwind, provided that the winder control lever or other operating mechanism is moved in the appropriate direction. (See also overwind switch.) belt protection device A device fitted to a belt conveyor to give an alarm or
20、to cause the conveyor to stop in the event of a defect such as belt slip, breakage, tearing, misalignment, overload, or overheating. belt slip device A device fitted to a belt conveyor to give an alarm or to cause the conveyor to stop in the event of belt slip exceeding a predetermined amount. bolte
21、d cable coupler Two cable coupling units with connecting pins, bolted together to form a straight through connecting box. bolted cable plug and socket A plug and a socket designed to be held together by one or more bolts or screws, or studs and nuts, in such a way that they cannot be disengaged with
22、out the use of a tool. cable coupler adaptor flit plug adaptor An adaptor used to connect a cable coupling unit to apparatus. It may either be separate from or be integral with the enclosure of the apparatus to which the cable coupling unit is to be connected. cable coupling unit flit plug A detacha
23、ble cable sealing box utilizing contact tubes and pins to facilitate ready connection to, or disconnection from, a similar unit or other apparatus. cable sealing box A closed box to which a cable can be attached by means of a gland and which is designed to be filled with insulating compound to prote
24、ct the insulation of the cable from air or moisture. cancelling device (shaftsignals) A device, operated by movement of a rope drum or sheave, which cancels signals shown on the shaft signal indicator and enables fresh signals to be received. certified apparatus Apparatus which has been certified un
25、der Government authority as complying with the requirements for flameproof enclosure or for intrinsic safety. core balance (earth fault) protection A system of protection applied to circuits in an a.c. system having its neutral point earthed and utilizing a core balance transformer to detect the ear
26、th leakage current. (See also earth fault protection.) core balance transformer A form of current transformer, the primary windings of which are connected in each phase (and neutral if any) of a circuit. The flux resulting from an out-of balance current in the primary windings induces a voltage in a
27、 secondary winding. detachable cable sealing box A cable sealing box which can be disconnected and detached from associated apparatus without disturbing the sealing of the cable. earth fault latchout A feature of an earth fault protective system which requires the earth fault relay to be manually re
28、set. earth fault lockout system A system whereby a circuit is monitored to prevent application or restoration of supply if an earth fault exists.BS3618-7:1973 2 BSI 12-1999 Term Definition earth fault protection earth leakage protection, deprecated A system of protection designed to cause the supply
29、 to a circuit or systemto be interrupted when the leakage current to earth exceeds apredetermined value. earth leakage protection See earth fault protection. flameproof enclosure An enclosure for electrical apparatus that will withstand an internal explosion of the flammable gas or vapour which may
30、enter it, without suffering damage and without communicating the internal flammation tothe external flammable gas or vapour for which it is designed, through any joints or structural openings in the enclosure. (See also certified apparatus.) flexible cable See trailing cable. flexible cable coupler
31、See trailing cable coupler. flit plug See cable coupling unit. flit plug adaptor See cable coupler adaptor. gate-end box gate-end switch, deprecated gate-end unit A flameproof enclosure containing electrical apparatus, such as control gear, switchgear or protective gear, designed primarily for use u
32、nderground. (See also gate-end section switch.) gate-end section switch A form of gate-end box incorporating a circuit-breaker to control and/or isolate part of an electrical system. gate-end switch See gate-end box. gate-end unit See gate-end box. gate interlock A system designed to prevent shaft c
33、onveyances from being moved, or action signals being transmitted, unless all shaft gates are closed. incendive sparking Sparking capable of causing an ignition. inset tee box A junction box designed to be mounted in an inset to enable a connection to be taken from a shaft cable. intrinsically safe a
34、pparatus Apparatus that is so constructed that, when it is installed and operated under the conditions specified by the certifying authority, any electrical sparking that may occur in normal working, either in the apparatus or in the circuit associated therewith, is incapable of causing an ignition
35、of the prescribed flammable gas or vapour. (See also certified apparatus.) intrinsically safe circuit A circuit in which any electrical sparking that may occur in normal working under the conditions specified by the certifying authority, and with the prescribed components, is incapable of causing an
36、 ignition of the prescribed flammable gas or vapour. kep interlock A system designed to prevent a shaft conveyance being lowered before all keps are fully withdrawn. kep switch A switch associated with kep interlocks or warning devices. local control Control of a circuit breaker, starter, or similar
37、 apparatus by means of amanually operated external switch or push-button integral with the apparatus. overwind switch A switch which may be used on winders, or haulages, to cause the power to be cut off from the driving motor, or engine, and the brakes to be applied in the event of the conveyance pa
38、ssing its normal limit of travel. Such a switch may be: 1) situated in the headgear and operated by the conveyance; 2) mounted on the automatic contrivance; or 3) operated by the depth or distance indicator.BS3618-7:1973 BSI 12-1999 3 Term Definition pilot core protection A feature of a remote contr
39、ol circuit which opens the control relay, and prevents it from closing, in the event of an open-circuit or a short-circuit on the control cores of the system. pilot switch See remote control switch. pliable armoured cable A flexible cable having collective armour comprising stranded groups of galvan
40、ized steel wires. pommel A restrained cable plug(q.v.). portable apparatus Apparatus designed to be moved while it is working. portable substation See transportable substation. remote control Control, from a distance, of a circuit breaker, starter, or similar apparatus. remote control switch pilot s
41、witch A switch operating in a low voltage control circuit to open or close a contactor or other switch in a main circuit. restrained cable plug and socket A plug and socket designed to be held together by an operating bolt, or screwed union ring, or other equivalent device, the use of which enables
42、the plug to be readily inserted or withdrawn. A flameproof restrained plug and socket incorporates an interlock to ensure that the power connections are dead when they are separated or until they make contact; the design is such that the enclosure is flameproof at all times when there is contact bet
43、ween the pins and tubes. (See also BS4673.) restricted earth fault protection As used in mining, a system of earth fault protection in which the fault current is limited, without requiring the use of sensitive earth fault protection. screened trailing cable A flexible cable provided with a protectiv
44、e screen or screens incorporating tinned copper wire, or other conducting material, applieda) to enclose each power core separately (individual screening), orb) to enclose all the cores of the cable (collective screening). sensitive earth fault protection A system of earth fault protection in which
45、the fault current is limited by design to a low value which may require amplification in order to operate an earth fault relay. In the case of3-phase a.c. systems, the limitation of the leakage current may be effected by either: 1) inserting a current limiting device between the neutral point of the
46、 system and earth (single-point earthing); or 2) connecting, in each circuit to be protected, all phases, in star, through current limiting devices, each star point being connected to earth through an earth leakage protective device (multi-point earthing). sequence control A method of control whereb
47、y, once action has been initiated, a number of electrical circuits will automatically function in a prescribed order. sequence interlock An interlock provided between a number of electrical circuits, which are required to function in a prescribed order, and which prevents a circuit from being operat
48、ed unless the preceding circuit has completed its part in the sequence. shaft cable cleat A clamp fixed to a shaft wall or to a bunton to support vertical cables in a shaft. shaft feeder cable A cable mounted in a shaft to transmit electrical power to the shaft bottom and/or to an intermediate level
49、.BS3618-7:1973 4 BSI 12-1999 Term Definition shaft signal indicator A device, usually mounted in the winding engine house, which gives visual indication of the signals received from the banksman and the onsetter to regulate the movement of conveyances in a shaft, and which retains the indication until cancelled. (See also cancelling device.) shaft signal recorder A device which records, on paper or otherwise, the signals given by the banksman and the onsetter and the movements of the winder drum. telephone coupler A device, of a type approved under Go
copyright@ 2008-2019 麦多课文库（www.mydoc123.com）网站版权所有
备案/许可证编号：苏ICP备17064731号-1