BS 387-1979 Specification for interchangeability dimensions of the drive of solid and segmental circular saws for cold cutting of metals saw diameter range 224 mm to 2240 mm《金属冷切削用.pdf

1、BRITISH STANDARD BS387:1979 ISO2924:1973 Specification for Interchangeability dimensions of the drive of solid and segmental circular saws for cold cutting of metals: saw diameter range224mm to2240mm ISO title: Solid and segmental circular saws for cold cutting of metals Interchangeability dimension

2、s of the drive Saw diameter range224 to2240mm UDC621.934.2.023BS387:1979 This British Standard, having been prepared under the directionof the Mechanical Engineering Standards Committee, was published underthe authority of the Executive Board and comesintoeffect on 28February1979 BSI11-1999 First pu

3、blished September1930 First revision December1948 Second revision February1979 The following BSI references relate to the work on this standard: Committee reference MEE/167 Draft for comment78/74219DC ISBN 0 580 10713 2 Cooperating organizations The Mechanical Engineering Standards Committee, under

4、whose direction this British Standard was prepared, consists of representatives from the following Government departments and scientific and industrial organizations: Associated Offices Technical Committee Department of the Environment Association of Consulting Engineers Department of Trade (Marine

5、Division) Association of Hydraulic Equipment Electricity Supply Industry in England and Manufacturers Wales Association of Mining, Electrical and Engineering Equipment Users Association Mechanical Engineers Federation of Manufacturers of Construction British Compressed Air Society Equipment and Cran

6、es British Electrical and Allied Manufacturers Health and Safety Executive Association (BEAMA) Institution of Gas Engineers British Gas Corporation Institution of Mechanical Engineers British Gear Manufacturers Association Institution of Plant Engineers British Internal Combustion Engine Institution

7、 of Production Engineers* Manufacturers Association Lloyds Register of Shipping British Pump Manufacturers Association London Transport Executive British Steel Corporation Machine Tool Trades Association* British Steel Industry* Ministry of Defence British Valve Manufacturers Association National Co

8、al Board Chartered Institution of Building Services Process Plant Association Crown Agents for Oversea Governments and Railway Industry Association of Great Britain Administrations Society of Motor Manufacturers and Traders Department of Industry (Mechanical Limited Engineering) Telecommunication En

9、gineering and Department of Industry (National Engineering Manufacturing Association (TEMA) Laboratory) Water-tube Boilermakers Association The organizations marked with an asterisk in the above list, together with the following, were directly represented on the committee entrusted with the preparat

10、ion of this British Standard: British Hacksaw and Bandsaw Manufacturers Milling Cutter Association Association National Sawmilling Association British Woodworking Federation Department of the Environment (Building Research Establishment, Princes Risborough Laboratory) Amendments issued since publica

11、tion Amd. No. Date of issue CommentsBS387:1979 BSI 11-1999 i Contents Page Cooperating organizations Inside front cover National foreword ii 1 Scope and field of application 1 2 References 1 3 Interchangeability 1 4 Dimensions 2 Publications referred to Inside back coverBS387:1979 ii BSI 11-1999 Nat

12、ional foreword This British Standard has been prepared under the direction of the Mechanical Engineering Standards Committee. It is identical with ISO2924 “Solid and segmental circular saws for cold cutting of metals Interchangeability dimensions of the drive Saw diameter range224 to2240mm” and is a

13、 revision of BS387:1948. Terminology and conventions. The text of the International Standard has been approved as suitable for publication, without deviation, as a British Standard. Some terminology and certain conventions are not identical with those used in British Standards; attention is especial

14、ly drawn to the following. Where the words “International Standard” appear, referring to this standard, they should be interpreted as “British Standard”. The comma has been used throughout as a decimal marker. In British Standards it is current practice to use a full point on the baseline as the dec

15、imal marker. The technical committee has reviewed the provisions of ISO/R240 1)and ISO/R523 1) , to which reference is made in clause3, and has decided that they are acceptable for use in conjunction with this standard. Compliance with a British Standard does not of itself confer immunity from legal

16、 obligations. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Summary of pages This document comprises a front cover, an inside front cover, pagesi andii, pages1 and 2, an inside back

17、 cover and a back cover. This standard has been updated (see copyright date) and may have had amendments incorporated. This will be indicated in the amendment table on the inside front cover. Cross-references International Standard Corresponding British Standard ISO/R1101 BS308 Engineering drawing p

18、ractice Part3:1972 Geometrical tolerancing (Technically equivalent) 1) Now issued as an ISO standard.BS387:1979 BSI 11-1999 1 1 Scope and field of application This International Standard specifies the interchangeability dimensions of the drive of saws for cold cutting of metals. It applies to all ty

19、pes of circular saws for metal working, both solid saws made from high speed steel and saws with detachable segments. 2 References ISO/R240, Interchangeability dimensions for milling cutters and cutter arbors or cutter mandrels Metric series and inch series. ISO/R523, Recommended range of outside di

20、ameters for milling cutters. ISO/R1101, Tolerances of form and of position Part1: Generalities, symbols, indications on drawings. 3 Interchangeability The complete range of external diameters D is subdivided into a number of groups, the ranges of which have been taken from the R20 series of preferre

21、d numbers and that of the diameters recommended in the R10 series, in compliance with ISO/R523. The range of internal diameters d is taken from ISO/R240, with the addition of internal diameter120mm.BS387:1979 2 BSI 11-1999 4 Dimensions Dimensions in millimetres Saws Machines Diameter range D D d d 1

22、 d 2 t * Diameter of the4 driving pins Above up to preferred size H8 * J s 14 d 2 h8 224 280 250 32 50 8,5 0,30 8 280 355 315 40 63 10,5 0,30 10 355 450 400 50 80 17 0,35 16 450 560 500 100 560 710 630 80 120 22 0,35 20 710 900 800 900 1120 1000 100 200 32 0,45 30 1120 1400 1250 1400 1800 1600 120 3

23、15 40 0,55 38 1800 2240 2000 400 *For special applications, when saw blades are running at higher speeds, a tolerance of H7 is recommended. *Dimension t represents the positional tolerance of the hole of diameter d 2 . Its centre should lie inside a circle of diameter t, the centre of which coincide

24、s with the true specified position of the point considered (seeISO/R1101).BS387:1979 BSI 11-1999 Publications referred to See national foreword.BS387:1979 ISO2924:1973 BSI 389 Chiswick High Road London W4 4AL BSIBritishStandardsInstitution BSI is the independent national body responsible for prepari

25、ng BritishStandards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter. Revisions BritishStandards are updated by amendment or revision. Users of BritishStandards should make sure that they possess the latest amendments or editions. It

26、 is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this BritishStandard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside fron

27、t cover. Tel:02089969000. Fax:02089967400. BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards. Buying standards Orders for all BSI, international and foreign standards publications should be addressed to

28、 Customer Services. Tel:02089969001. Fax:02089967001. In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as BritishStandards, unless otherwise requested. Information on standards BSI provides a wide range of informat

29、ion on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give details on all its products and services. Contact the Information Centre. Tel:02089967111. Fax:02089967048.

30、 Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of these and other benefits contact Membership Administration. Tel:02089967002. Fax:02089967001. Copyright Copyright subsists in all BSI publi

31、cations. BSI also holds the copyright, in the UK, of the publications of the international standardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, p

32、hotocopying, recording or otherwise without prior written permission from BSI. This does not preclude the free use, in the course of implementing the standard, of necessary details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. If permission is granted, the terms may include royalty payments or a licensing agreement. Details and advice can be obtained from the Copyright Manager. Tel:02089967070.