BS 4050-2-1966 Specification for mosaic parquet panels - Classification and quality requirements《马赛克拼花地板规范 分类和质量要求》.pdf

1、BRITISH STANDARD BS 4050:1966 Incorporating Amendment Nos.1 and 2 Mosaic parquet panels Part 2: Classification and quality requirementsBS4050:1966 This British Standard, having been approved by the TimberIndustry Standards Committee and endorsed by the Chairman of the Building Divisional Council, wa

2、s publishedunder the authority ofthe General Council on 15July 1966 BSI 03-2000 The following BSI references relate to the work on this standard: Committee reference TIB/18 Draft for comment D65/4580 ISBN 0 580 34768 0 Co-operating organizations The Timber Industry Standards Committee, under whose s

3、upervision this British Standard was prepared, consists of representatives from the following Government departments and scientific and industrial organizations: British Door Association British Furniture Trade Confederation British Plastics Federation British Woodwork Manufacturers Association Fibr

4、e Building Board Development Organization Limited Forestry Commission Hardwood Flooring Manufacturers Association* Institute of Wood Science Institution of Civil Engineers Institution of Municipal Engineers Institution of Structural Engineers Ministry of Public Building and Works Ministry of Technol

5、ogy Forest Products Research Laboratory* National Federation of Building Trades Employers National Sawmilling Association Royal Institute of British Architects* Royal Institution of Chartered Surveyors Softwood Agents these will be covered in a separate International Standard for oak panels, which i

6、s at present in draft form. Because of these changes it has been decided to amend BS4050:1966, redesignated as BS 4050-2, to cover quality requirements and classification only, and to publish a Part 1 identical with ISO 631. It is intended that BS 4050-2 will be replaced by the International Standar

7、d for quality requirements and classification of oak panels as soon as the latter is published. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does

8、 not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, pages i and ii, pages1 and 2, an inside back cover and a back cover. This standard has been updated (see copyright date) and may have had amendments incorporated. Thi

9、s will be indicated in the amendment table on the inside front cover.BS4050:1966 BSI 03-2000 1 1 Scope This British Standard specifies requirements for wood mosaic flooring made from fingers of any species of wood in patterns to form squares, or other designs, intended to be bonded to a supporting b

10、ase, either directly or over an interlayer, by means of pre-fabricated panels or individual fingers. 2 Definitions For the purposes of this British Standard the definitions given in BS 565 1)apply, with the addition of the following: mosaic finger small solid wood component of regular form with plan

11、ed or finely sawn faces and edges abnormal coloration coloration which is different from the normal average coloration of the sound wood of a given species black knots adherent knots of a colour in distinct contrast with that of the surrounding wood 3 Wood a) General requirements. The wood used shal

12、l be sound and free from any decay or damage caused by insects which may adversely affect the wearing properties of the wood. Knot holes are not admissible. The face sides of mosaic fingers shall be free of ring shakes, which are admissible only on the backs provided that they are sound and do not p

13、enetrate within 5 mm (0.2 in) of the face. Any preservative treatment of sapwood against damage by insects shall be the subject of special agreement between the purchaser and the supplier and any treatment applied shall not affect either the appearance or the bonding characteristics of the wood. b)

14、Quality. i) First quality (I). B) Wearing surface. The wearing surface shall be free from sapwood, decay, seasoning checks, veins, pockets, abnormal coloration and knots, other than pin knots or black knots with a diameter not exceeding 2 mm (0.08 in). Not more than 5 per cent of the mosaic fingers

15、may contain pin or black knots. ii) Second quality (II). B) Wearing surface. The wearing surface shall be free from decay and from seasoning checks, veins, pockets, black knots and sound knots in excess of the limits shown in Table 1. Not more than one of these defects may be present in any mosaic f

16、inger. Table 1 Deleted 4 Deleted Table 2 Deleted 5 Deleted 6 Deleted 7 Deleted 1) BS 565, “Glossary of terms relating to timber and woodwork”.BS4050:1966 2 BSI 03-2000 Appendix A Deleted Figure 1 Deleted Figure 2 DeletedBS4050:1966 BSI 03-2000 British Standards The following are available on applica

17、tion: YEARBOOK Including subject index and numerical list of British Standards 15s. SECTIONAL LISTS. Gratis Acoustics Aircraft materials and components Building materials and components Chemical engineering Chemicals, fats, oils, scientific apparatus, etc. Cinematography and photography Coal, coke a

18、nd colliery requisites Codes of Practice Consumer goods Documentation, including Universal Decimal Classification Drawing practice Electrical engineering Farming, dairying and allied interests Furniture, bedding and furnishings Gas and solid fuel and refractories Glassware including scientific appar

19、atus Hospital equipment Illumination and lighting fittings Industrial instruments, etc. Iron and steel Machine tools Mechanical engineering Nomenclature, symbols and abbreviations Non-ferrous metals Packaging and containers Paints, varnishes, paint materials and colours for paints Personal safety eq

20、uipment Petroleum industry Plastics Printing, paper and stationery Road engineering Rubber Shipbuilding Textiles and clothing WeldingBS 4050:1966 BSI 389 Chiswick High Road London W4 4AL BSIBritishStandardsInstitution BSI is the independent national body responsible for preparing BritishStandards. I

21、t presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter. Revisions BritishStandards are updated by amendment or revision. Users of BritishStandards should make sure that they possess the latest amendments or editions. It is the constant aim o

22、f BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this BritishStandard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel:020899690

23、00. Fax:02089967400. BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards. Buying standards Orders for all BSI, international and foreign standards publications should be addressed to Customer Services. Te

24、l:02089969001. Fax:02089967001. In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as BritishStandards, unless otherwise requested. Information on standards BSI provides a wide range of information on national, Europ

25、ean and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give details on all its products and services. Contact the Information Centre. Tel:02089967111. Fax:02089967048. Subscribing members o

26、f BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of these and other benefits contact Membership Administration. Tel:02089967002. Fax:02089967001. Copyright Copyright subsists in all BSI publications. BSI also hold

27、s the copyright, in the UK, of the publications of the international standardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, photocopying, recording

28、 or otherwise without prior written permission from BSI. This does not preclude the free use, in the course of implementing the standard, of necessary details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. If permission is granted, the terms may include royalty payments or a licensing agreement. Details and advice can be obtained from the Copyright Manager. Tel:02089967070.