BS 4361-11-1988 Woodworking machines - Specification for single spindle boring machines《木工机械 单轴钻床规范》.pdf

1、BRITISH STANDARD BS4361-11: 1988 ISO7945:1985 Woodworking machines Part11: Specification for single spindle boring machines ISO title: Woodworking machines Single spindle boring machines Nomenclature and acceptance conditions UDC 674.055:621.952.3BS4361-11:1988 This BritishStandard, having been prep

2、ared under the directionof the Machine, Engineers and Hand Tools Standards Committee, was published under the authority ofthe Board of BSI and comes intoeffect on 30November1988 BSI12-1999 The following BSI references relate to the work on this standard: Committee reference MTE/23 Draft for comment

3、83/74268 DC ISBN 0 580 16746 1 Committees responsible for this BritishStandard The preparation of this BritishStandard was entrusted by the Machine, Engineers and Hand Tools Standards Committee (MTE/-) to Technical Committee MTE/23 upon which the following bodies were represented: Advanced Manufactu

4、ring Technology Research Institute British Furniture Manufacturers Federation British Railways Board British Woodworking Federation Department of the Environment, Building Research Establishment (Princes Risborough Laboratory) Department of Trade and Industry, Mechanical Engineering and Manufacturin

5、g Technology Division (Mmt) Federation of British Hand Tool Manufacturers Furniture Industry Research Association Furniture, Timber and Allied Trades Union Health and Safety Executive Institute of Machine Wood Working Technology Ltd. National Sawmilling Association Saw Association Timber Research an

6、d Development Association Union of Construction, Allied Trades and Technicians Woodworking Machinery Suppliers Association Ltd. Amendments issued since publication Amd. No. Date of issue CommentsBS4361-11:1988 BSI 12-1999 i Contents Page Committees responsible Inside front cover National foreword ii

7、 1 Scope and field of application 1 2 Reference 1 3 Preliminary remarks 1 4 Nomenclature 2 5 Acceptance conditions and permissible deviations Geometrical tests 4 Annex Equivalent terms 6 Publication referred to Inside back coverBS4361-11:1988 ii BSI 12-1999 National foreword This Part of BS4361 has

8、been prepared under the direction of the Machine, Engineers and Hand Tools Standards Committee and implements agreements of the International Organization for Standardization (ISO). It is identical with ISO7945:1985 “Woodworking machines Single spindle boring machines Nomenclature and acceptance con

9、ditions”. Together with BS4361-4 to BS4361-10 and BS4361-12, this Part of BS4361 supersedes BS4361-2:1968 which is withdrawn. Diagrams. For reasons of simplicity the diagrams in this standard illustrate only one type of machine. Terminology and conventions. The text of the International Standard has

10、 been approved as suitable for publication as a BritishStandard without deviation. Some terminology and certain conventions are not identical with those used in BritishStandards; attention is drawn especially to the following. The comma has been used as a decimal marker. In BritishStandards it is cu

11、rrent practice to use a full point on the baseline as the decimal marker. Wherever the words “this International Standard” appear, referring to this standard, they should be read as “this Part of BS4361”. A British Standard does not purport to include all the necessary provisions of a contract. User

12、s of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Cross-reference International Standard Corresponding BritishStandard ISO/R230 a BS3800:1964 Methods for testing the accuracy of machine

13、tools (Technically equivalent) a Now published as ISO230-1:1986. Summary of pages This document comprises a front cover, an inside front cover, pagesi andii, pages1 to6, an inside back cover and a back cover. This standard has been updated (see copyright date) and may have had amendments incorporate

14、d. This will be indicated in the amendment table on the inside front cover.BS4361-11:1988 BSI 12-1999 1 1 Scope and field of application This International Standard specifies the nomenclature appropriate to each part of the machine and, with reference to ISO/R230, the geometrical tests for single sp

15、indle boring machines, and gives the corresponding permissible deviations which apply to machines for general purpose use and normal accuracy. NOTEIn addition to terms used in two of the three official ISO languages (English and French), this International Standard gives in the Annex the equivalent

16、terms in German, Italian and Swedish; these have been included at the request of Technical Committee ISO/TC39 and are published under the responsibility of the member bodies for Germany, F.R. (DIN), Italy (UNI) and Sweden (SIS). However, only the terms and definitions given in the official languages

17、 can be considered as ISO terms and definitions. This International Standard deals only with the verification of accuracy of the machine. It does not apply to the testing of the running of the machine (vibrations, abnormal noises, stick-slip motion of the components, etc.), nor to its characteristic

18、s (speeds, feeds, etc.) which should generally be checked before testing accuracy. This International Standard does not impose any practical test. For single spindle boring machines, practical tests should be exceptions and have to be stated in a previous agreement between the producer and the user.

19、 2 Reference ISO/R230, Test code for machine tools. 3 Preliminary remarks 3.1 In this International Standard all dimensions and permissible deviations are expressed in millimetres. 3.2 To apply this International Standard, reference should be made to ISO/R230, especially for installation of the mach

20、ine before testing, the warming up of the main spindle of the machine and other moving parts, and description of measuring methods. The measuring instruments shall not permit errors over1/3 of the checked tolerances. 3.3 The sequence in which the geometrical tests are given is related to the sub-ass

21、emblies of the machine and this in no way defines the practical order of testing. In order to make mounting of instruments or gauging easier, tests may be applied in any order. 3.4 When inspecting a machine, it is not always possible or necessary to carry out all the tests given in this Internationa

22、l Standard. 3.5 It is up to the user to choose, in agreement with the manufacturer, those tests relating to the properties which are of interest to him, but these tests are to be clearly stated when ordering a machine. 3.6 A movement is longitudinal when it takes place in the working direction of th

23、e piece. 3.7 When establishing the tolerance for a measuring range different from that given in this International Standard (see2.311 in ISO/R230), it should be taken into consideration that the minimum value of the tolerance is0,01mm.BS4361-11:1988 2 BSI 12-1999 4 NomenclatureBS4361-11:1988 BSI 12-

24、1999 3 Reference English French Single spindle boring machine Perceuse monobroche 1 1.1 1.2 1.3 1.4 2 3 3.1 3.2 3.3 4 4.1 4.2 4.3 4.4 5 5.1 5.2 5.3 5.4 5.5 6 6.1 6.2 6.3 6.4 6.5 6.6 6.7 6.8 6.9 6.10 6.11 6.12 6.13 6.14 7 7.1 7.2 7.3 7.4 8 9 10 10.1 Framework Base Column Support Head Feed of workpiec

25、e and/or tools Workpiece support clamp and guide Table Table extension Supports on column base Toolholders and tools Drilling spindle Drilling chuck Drill Multispindle end Workheads and tool drives Motor Motor pulley Drive belt Spindle pulley Spindle sleeve Controls Foot operated switch Hand operate

26、d switch Speed adjustment control Speed indicator Hand adjusted spindle travel operation Foot adjusted spindle travel operation Positioning pin for table horizontal Table clamping lever Graduated scale Handwheel for adjusting table height Clamping lever to table height Light switch Light Drill depth

27、 adjuster Safety devices (examples) Emergency stop Hood Cut-out lever (for use when drilling with foot pedal) Table insert (replaceable) Miscellaneous Free Examples of work Blind hole and through hole Ossature Socle Colonne Support Tte Dplacement des pices et/ou outils Support, maintien et guidage d

28、es pices Table Allonge de table Taques sur socle Porte-outils et outils Broche de perage Mandrin de perage Mche Embout multibroches Unit de travail et son entranement Moteur Poulie du moteur Courroie dentranement Poulie de broche Douille de broche Commandes Commutateur au pied Commutateur manuel Com

29、mande de rglage des vitesses Indicateur de vitesses Commande de descente manuelle de broche Pdale de commande de descente de broche Goupille de positionnement de la table horizontal Levier de blocage de la table chelle gradue Commande de rglage en hauteur de la table Levier de blocage en hauteur de

30、la table Interrupteur de lampe dclairage Lampe Rglage de la profondeur de perage Dispositifs de scurit (exemples) Interrupteur durgence Capot Levier de dbrayage (perage par pdale) Rondelle de table en bois (interchangeable) Divers Libre Exemples de travail Trou borgne et trou dbouchantBS 4361-11:198

31、8 4 BSI 12-1999 5 Acceptance conditions and permissible deviations Geometrical tests No. Diagram Object Permissible deviation Measuring instruments Observations and references in test code ISO/R230 G1 Checking of flatness of the table: a) longitudinal straightness b) transverse straightness c) diago

32、nal straightness for Au 500 for A 500 for Bu 200 for B 200 for Au 500 for A 500 a) 0,10 0,20 b) 0,05 0,10 c) 0,15 0,30 Straightedge and gauges Clause5.322 G2 Measuring of the run-out of the spindle for C=150 0,35 Dial gauge and test mandrel Clause5.612.3BS 4361-11:1988 BSI 12-1999 5 No. Diagram Obje

33、ct Permissible deviation Measuring instruments Observations and references in test code ISO/R230 G3 Checking of squareness of the spindle axis to the table surface 0,30/400 a Dial gauge Clause5.512.42 a Distance D G4 Checking of squareness of the spindle movement to the table surface 0,30/150 a Dial

34、 gauge and steel square Clause5.522.2 a Distance EBS4361-11:1988 6 BSI 12-1999 Annex Equivalent terms Reference German Italian Swedish Einspindelige Universal-Bohrmaschine Foratrice monomandrino Enspindlig borrmaskin 1 1.1 1.2 1.3 1.4 2 3 3.1 3.2 3.3 4 4.1 4.2 4.3 4.4 5 5.1 5.2 5.3 5.4 5.5 6 6.1 6.2

35、 6.3 6.4 6.5 6.6 6.7 6.8 6.9 6.10 6.11 6.12 6.13 6.14 7 7.1 7.2 7.3 7.4 8 9 10 10.1 Stnder Fu Sule Tischausleger Kopf Vorschub von Werkstck und/oder Werkzeug Werkstckauflage, -Halterung und -Fhrung Tisch Tischverbreiterung, ausziehbar Auflagen am Fu Werkzeugtrger und Werkzeuge Bohrspindel Bohrfutter

36、 Bohrer Mehrspindelbohrkopf Einbauteile und Teile fr den Werkzeugantrieb Motor Motor-Riemenscheibe Antriebsriemen Spindel-Riemenscheibe Spindelhlse Bedienungs- und berwachungs- organe Schalter, fubedient Schalter, handbedient Drehzahleinstellung Drehzahlanzeige Bohrhubbettigung von Hand Bohrhubbetti

37、gung mit Fubgel Positionierstift fr Tisch, horizontal Tisch-Klemmhebel Gradskala Handrad zur Tischhhenverstellung Klemmhebel zur Tischhhenverstellung Lampenschalter Lampe Bohrtiefenanschlag Sicherheitseinrichtungen (Beispiele) Notausschalter Riemenschutzhaube Ausschalthebel (beim Bohren mit Fupedal)

38、 Tischeinlage aus Holz (auswechselbar) Verschiedenes Frei Arbeitsbeispiele Sackloch- und Durchgangsbohrungen Incastellatura Zoccolo Colonna Supporto Testa Spostamento dei pezzi e/o degli utensili Supporto, fissaggio e guida dei pezzi Piano di lavoro Prolunga di lavoro Sopporto sullo zoccolo Portaute

39、nsili ed utensili Mandrino Bussola portapunta Punta Testina multipla Unit operatrice e suo azionamento Motore Puleggia motore Cinghie di trasmissione Puleggia mandrino Bussola portamandrino Comandi Interruttore a pedale Interruttore a pulsante Regolazione numero giri Lettura numero giri Comando a ma

40、no per discesa mandrino Comando a pedale per discesa mandrino Perno posizionamento piano di lavoro Leva bloccaggio piano di lavoro orizzontale Scala angolare Volantino regolazione altezza piano di lavoro Leva bloccaggio regolazione altezza piano di lavoro Interruttore lampada Lampada Regolazione pro

41、fondit di foratura Dispositivi di sicurezza (esempi) Interruttore demergenza Protezione cinghie Levetta arresto (foratura a pedale) Rondella di legno per piano di lavoro (in tercambiabile) Varie Libero Esempi di lavorazione Fori ciechi e fori passanti Stativkonstruktion Sockel Pelare Support Huvud M

42、atning av arbetsstycke och/eller verktyg Styrning och fasthllning av arbetsstycke Bord Bordfrlngning Stdklackar p sockel Verktygshllare och verktyg Borrspindel Borrchuck Borr Flerspindligt borrhuvud Bearbetningsenheter och drivsystem Motor Remskiva/motor Rem Remskiva/spindel Spindelhylsa Manverorgan

43、 Strmbrytare (fotmanvrerad) Strmbrytare (handmanvrerad) Varvtalsreglage Varvtalsvisare Matningshandtag Matningspedal Horisontalt positioneringsstift fr bordet Lsspak (fr bordet) Gradskala Ratt fr hjdreglering Lsspak fr hjdinstllning Strmbrytare fr lampa Lampa Borrdjupsinstllning Skerhetsanordningar

44、(exempel) Ndstopp Remskydd Frikoppling av matningshandtaget Bordinlgg (utbytbart) Diverse Vakant Bearbetningsexempel Bottenhl och genomgende hlBS4361-11:1988 BSI 12-1999 Publication referred to Seenational foreword.BS4361-11: 1988 ISO7945:1985 BSI 389 Chiswick High Road London W4 4AL BSIBritishStand

45、ardsInstitution BSI is the independent national body responsible for preparing BritishStandards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter. Revisions BritishStandards are updated by amendment or revision. Users of BritishStanda

46、rds should make sure that they possess the latest amendments or editions. It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this BritishStandard would inform the Secretary of the technical

47、committee responsible, the identity of which can be found on the inside front cover. Tel:02089969000. Fax:02089967400. BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards. Buying standards Orders for all

48、BSI, international and foreign standards publications should be addressed to Customer Services. Tel:02089969001. Fax:02089967001. In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as BritishStandards, unless otherwi

49、se requested. Information on standards BSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give details on all its products and services. Contact the Information Centre. Tel:02089967111. Fax:02089967048. Subscribing members of BSI are kept up to date with standards developments and receive substantial disco