BS 4G 229-1996 Schedule for environmental conditions and test procedures for airborne equipment《机载设备环境条件和试验规程一览表》.pdf

1、BRITISH STANDARD AEROSPACE SERIES BS 4G 229: 1996 ISO 7137:1995 Schedule for Environmental conditions and test procedures for airborne equipment ICS 49.020BS4G229:1996 This British Standard, having been prepared under the directionof the Engineering SectorBoard, was published underthe authority of t

2、he Standards Board and comes intoeffect on 15June1996 BSI 11-1999 First published February 1982 Second edition December 1987 Third edition August 1993 Fourth edition June 1996 The following BSI references relate to the work on this standard: Committee reference ACE/58 Draft for comment 94/704694 DC

3、ISBN 0 580 25626 X Committees responsible for this British Standard The preparation of this British Standard was entrusted to Technical Committee ACE/58, Environmental and operating conditions for aircraft equipment, upon which the following bodies were represented: Civil Aviation Authority Federati

4、on of the Electronics Industry Ministry of Defence Society of British Aerospace Companies Society of Environmental Engineers Amendments issued since publication Amd. No. Date CommentsBS4G229:1996 BSI 11-1999 i Contents Page Committees responsible Inside front cover National foreword ii 1 Scope 1 2 R

5、equirements 1 3 Test procedures 1 4 Reference to ISO test procedures 1 5 Revision of EUROCAE/ED-14C and RTCA/DO-16OC 1 Table 1 2 List of references Inside back coverBS4G229:1996 ii BSI 11-1999 National foreword This British Standard has been prepared by Technical Committee ACE/58 and is identical wi

6、th ISO7137:1995 Aircraft Environmental conditions and test procedures for airborne equipment, published by the International Organization for Standardization (ISO). This British Standard supersedes BS3G229:1993, which is withdrawn. The Technical Committee has reviewed the provisions of EUROCAE/ED-14

7、C, RCTA/DO-160C and ISO2671 to which normative reference is made in the text, and has decided that they are acceptable for use in conjunction with this standard. A related British Standard to ISO2671 is BS3G100-2.3.14:1973. NOTEThe latest edition of an Aerospace series standard is indicated by a pre

8、fix number. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Cross-references Publication

9、referred to Corresponding British Standard ISO 2669:1995 BS G 260:1996 Specification for environmental tests for aircraft equipment Steady-state acceleration (Identical) ISO 2678:1977 BS 3G 100 Specification for general requirements for equipment for use on aircraft Part 4 Electrical equipment Secti

10、on 1 Construction and general Subsection 1.1:1982 Electrical insulation tests (Identical) ISO/TR 2685 Part 2 All equipment Section 3 Environmental conditions Subsection 3.13:1973 Resistance to fire in designated fire zones (Technically equivalent) Summary of pages This document comprises a front cov

11、er, an inside front cover, pagesi andii, pages1 and2, an inside back cover and a back cover. This standard has been updated (see copyright date) and may have had amendments incorporated. This will be indicated in the amendment table on the inside front cover.BS4G229:1996 BSI 11-1999 1 1 Scope This I

12、nternational Standard lists the different environmental conditions and test procedures for airborne equipment and is primarily intended for civil and/or transport aircraft applications. This International Standard is an endorsement ofsections of publications EUROCAE/ED-14C andRTCA/DO-160C 1) , which

13、 supplement several ISO International Standards. 2 Requirements Environmental conditions and test procedures applicable to airborne equipment are laid downinEUROCAE/ED-14C and RTCA/DO-160C, 1989-12-12 editions, amended in accordance with revision No.2 (1992-06-19), which are adopted as de facto ISO

14、International Standards. All environmental conditions and test procedures laid down in EUROCAE/ED-14C and RTCA/DO-160C are not necessarily applicable to all airborne equipment. The selection of the appropriate environmental conditions and test procedures is the responsibility of the writer (author)

15、of the performance standards for the specific airborne equipment. 3 Test procedures The test procedures given inTable 1 are issued or endorsed by ISO. 4 Reference to ISO test procedures When referring to environmental conditions and test procedures dealt with in this International Standard, referenc

16、e shall be made to the number of this International Standard and to the reference number of the test procedure as given inTable 1. Use the example given below as a model. EXAMPLE Reference to the test procedure for fluids susceptibility in accordance with section11 of EUROCAE/ED-14C and RTCA/DO-160C

17、 shall be made as follows: Test procedure ISO 7137 1.6 5 Revision of EUROCAE/ED-14C and RTCA/DO-160C It has been agreed with EUROCAE and RTCA that Technical Committee ISO/TC20 will be consulted in the event of any revision or amendment of these publications. 1) These publications can be obtained fro

18、m the following addresses: EUROCAE (European Organization for Civil Aviation Electronics),11 rue Hamelin,75783 Paris Cedex16, France. RTCA (Radio Technical Commission for Aeronautics),1140 Connecticut Avenue, N.W., Suite1020, Washington, DC20036, USA.BS4G229:1996 2 BSI 11-1999 Table 1 Reference numb

19、er of test procedure Test procedure Relevant clause or publication 1 Atmospheric and other environments 1.1 Temperature and altitude Section 4 of EUROCAE/ED-14C and RTCA/DO-160C 1.2 Temperature variation Section 5 of EUROCAE/ED-14C and RTCA/DO-160C 1.3 Humidity Section 6 of EUROCAE/ED-14C and RTCA/D

20、O-160C 1.4 Icing Section 24 of EUROCAE/ED-14C and RTCA/DO-160C 1.5 Waterproofness Section 10 of EUROCAE/ED-14C and RTCA/DO-160C 1.6 Fluids susceptibility Section 11 of EUROCAE/ED-14C and RTCA/DO-160C 1.7 Sand and dust Section 12 of EUROCAE/ED-14C and RTCA/DO-160C 1.8 Fungus resistance Section 13 of

21、EUROCAE/ED-14C and RTCA/DO-160C 1.9 Salt spray Section 14 of EUROCAE/ED-14C and RTCA/DO-160C 2 Mechanical environment 2.1 Operational shocks and crash safety Section 7 of EUROCAE/ED-14C and RTCA/DO-160C 2.2 Vibration Section 8 of EUROCAE/ED-14C and RTCA/DO-160C 2.3 Steady-state acceleration ISO 2669

22、, Environmental tests for aircraft equipment Steady-state acceleration 2.4 Acoustic vibration ISO 2671, Environmental tests for aircraft equipment Part 3.4: Acoustic vibration 3 Electromagnetic environment 3.1 Magnetic effect Section 15 of EUROCAE/ED-14C and RTCA/DO-160C 3.2 Power input Section 16 o

23、f EUROCAE/ED-14C and RTCA/DO-160C 3.3 Voltage spike Section 17 of EUROCAE/ED-14C and RTCA/DO-160C 3.4 Audio frequency conducted susceptibility Power inputs Section 18 of EUROCAE/ED-14C and RTCA/DO-160C 3.5 Induced signal susceptibility Section 19 of EUROCAE/ED-14C and RTCA/DO-160C 3.6 Radio frequenc

24、y susceptibility (radiated and conducted) Section 20 of EUROCAE/ED-14C and RTCA/DO-160C 3.7 Emission of radio frequency energy Section 21 of EUROCAE/ED-14C and RTCA/DO-160C 3.8 Lightning induced transient susceptibility Section 22 of EUROCAE/ED-14C and RTCA/DO-160C, amended in accordance with revisi

25、on No.2 (1992-06-19) 3.9 Insulation resistance and high voltage ISO 2678, Environmental tests for aircraft equipment Insulation resistance and high voltage tests for electrical equipment 3.10 Lightning direct effects Section 23 of EUROCAE/ED-14C and RTCA/DO-160C 4 Explosion and fire 4.1 Explosion pr

26、oofness Section 9 of EUROCAE/ED-14C and RTCA/DO-160C 4.2 Fire resistance ISO 2685, Aircraft Environmental conditions and test procedures for airborne equipment Resistance to fire in designated fire zonesBS4G229:1996 BSI 11-1999 List of references See national foreword.BS 4G 229: 1996 ISO7137:1995 BS

27、I 389 Chiswick High Road London W4 4AL BSIBritishStandardsInstitution BSI is the independent national body responsible for preparing BritishStandards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter. Revisions BritishStandards are up

28、dated by amendment or revision. Users of BritishStandards should make sure that they possess the latest amendments or editions. It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this Britis

29、hStandard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel:02089969000. Fax:02089967400. BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest e

30、ditions of standards. Buying standards Orders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel:02089969001. Fax:02089967001. In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that h

31、ave been published as BritishStandards, unless otherwise requested. Information on standards BSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are als

32、o available which give details on all its products and services. Contact the Information Centre. Tel:02089967111. Fax:02089967048. Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of these and

33、 other benefits contact Membership Administration. Tel:02089967002. Fax:02089967001. Copyright Copyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the international standardization bodies. Except as permitted under the Copyright, Designs and Pa

34、tents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI. This does not preclude the free use, in the course of implementing the standard, of necessa

35、ry details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. If permission is granted, the terms may include royalty payments or a licensing agreement. Details and advice can be obtained from the Copyright Manager. Tel:02089967070.