BS 5369-1987 Methods of testing doors behaviour under humidity variations of door leaves placed in successive uniform climates《连续稳定气候区售出的门在湿度变化下的运转情况》.pdf

1、BRITISH STANDARD BS 5369:1987 EN 43:1985 Methods of testing doors; behaviour under humidity variations of door leaves placed in successive uniform climates The European Standard EN 43 has the status of a British Standard UDC 692.81:620.193.23BS5369:1987 This British Standard, having been prepared un

2、der the directionof the Elements and Components (of Diverse Materials)for Buildings Standards Committee, was published under the authority ofthe Board of BSI and comes intoeffect on 31 December 1987 BSI 09-1999 First published May 1976 First revision December 1987 The following BSI references relate

3、 to the work on this standard: Committee reference ECB/17 Draft for approval: See BSI News, July 1982 ISBN 0 580 16428 4 Cooperating organizations The European Committee for Standardization, under whose supervision this European Standard was prepared, comprises the national standards organizations o

4、f the following Western European countries. Austria Oesterreichisches Normungsinstitut Belgium Institut belge de normalisation Denmark Dansk Standardiseringsraad Finland Suomen Standardisoimisliito, r.y. France Association franaise de normalisation Germany Deutsches Institut fr Normung e.V. Greece H

5、ellenic Organization for Standardization Ireland National Standards Authority of Ireland Italy Ente Nazionale Italiano di Unificazione Netherlands Nederlands Normalisatie-instituut Norway Norges Standardiseringsforbund Portugal Direcco-Geral da Qualidade Spain Instituto Espagol de Normalizacin Swede

6、n Standardiseringskommissionen i Sverige Switzerland Association suisse de normalisation United Kingdom British Standards Institution Amendments issued since publication Amd. No. Date of issue CommentsBS5369:1987 BSI 09-1999 i Contents Page Cooperating organizations Inside front cover National forew

7、ord ii Brief history 2 1 Object 3 2 Field of application 3 3 References 3 4 Principle of the test 3 5 Procedure 3 6 Expression of results 3 National appendix A Inside back cover National appendix B Inside back coverBS5369:1987 ii BSI 09-1999 National foreword This British Standard has been prepared

8、under the direction of the Elements and Components (of Diverse Materials) for Buildings Standards Committee and is a revision of the1976 edition of BS5369 which is now withdrawn. BS 5369 is the English language version of EN43 “Methods of testing doors. Behaviour under humidity variations of door le

9、aves placed in successive uniform climates” published by the European Committee for Standardization (CEN). The revision of EN 43 was produced as a result of international discussion in which the UK took an active part and it amends the test temperatures to conform with ISO554 “Standard atmospheres f

10、or conditioning and/or testing Specifications”, published by the International Organization for Standardization (ISO). Other minor amendments have also been made. Terminology and conventions. The text of the European Standard may use some terminology and conventions that differ from those commonly u

11、sed in British Standards. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of page

12、s This document comprises a front cover, an inside front cover, pagesi andii, theEN title page, pages2 to 4, an inside back cover and a back cover. This standard has been updated (see copyright date) and may have had amendments incorporated. This will be indicated in the amendment table on the insid

13、e front cover.EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 43 June 1985 UDC 692.81:620.193.23 Supersedes EN 43, October 1975 Key words: Doors, tests, artificial weathering tests, humidity, surface defects, flatness, deterioration, testing conditions English version Methods of testing doors B

14、ehaviour under humidity variations of door leaves placed in successive uniform climates Mthodes dessais des portes Comportement aux variations dhumidit des vantaux de portes placs dans des climats uniformes successifs Prfverfahren fr Tren; Verhalten von Trblttern unter verschiedenen Feuchtigkeitsbed

15、ingungen in aufeinanderfolgenden allseitig einheitlich einwirkenden konstanten klimatischen Verhltnissen This European Standard was accepted by CEN on 20 September1984. CEN members are bound to comply with the requirements of the CEN Internal Regulations which stipulate the conditions for giving thi

16、s European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Central Secretariat or to any CEN member. This European Standard exists in three official version

17、s (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to CEN Central Secretariat has the same status as the official versions. CEN members are the national national standards organizations of Austr

18、ia, Belgium, Denmark, Finland, France, Germany, Greece, Ireland, Italy, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and UnitedKingdom. CEN European Committee for Standardization Comit Europen de Normalisation Europisches Komitee fr Normung Central Secretariat: rue de Stassart 36, B-105

19、0 Brussels CEN 1985. Copyright reserved to all CEN members Ref. No. EN43:1985 EEN43:1985 2 BSI 09-1999 Brief history This European Standard was drawn up by the Technical Committee CEN/TC33 “Technological tests for doors, windows, shutters and building hardware”, the Secretariat of which is held by A

20、FNOR. This European Standard was adopted by CEN on the strength of its acceptance by the following Member countries: Austria, Belgium, France, Germany, Greece, Italy, Netherlands, Norway, Switzerland, UnitedKingdom.EN43:1985 BSI 09-1999 3 1 Object This standard describes the method which is to be us

21、ed to test the behaviour, under humidity variations, of door leaves placed in successive uniform climates. 2 Field of application This standard can be applied to all doors which are nominally flat and rigid, and which contain a sufficient quantity of hygroscopic materials that might influence their

22、behaviour during this test. 3 References EN 24:1974, Doors. Measurement of defects of general flatness of door leaves. 4 Principle of the test The test consists of placing the door leaves for a determined duration in successive uniform climates and measuring any changes in general flatness and notin

23、g damage which results. 5 Procedure 5.1 After storage in non-detrimental conditions 1)(relative humidity between40% and75%), measure the general flatness (EN 24) of the door leaf and then place it first in a climate defined by: 5.2 Remeasure the general flatness. 5.3 Next, place the door leaf in a c

24、limate defined by: 5.4 Remeasure the general flatness once more. 5.5 The average values of temperature and relative humidity shall be maintained as close as possible to the nominal values. 5.6 The duration of exposure in each of the two climates shall be7days for unfinished doors and 21 days for all

25、 other doors. If the test house considers that the test can be stopped at a shorter duration, it shall justify its decision. 6 Expression of results The following information and results shall be recorded in the test report: type, dimensions, shape and constructional details of the door leaf which s

26、hall include any machining to receive hardware and any finish applied, method of mounting the door leaf during the test, duration of the preliminary storage in non-detrimental conditions and the characteristics of the conditions when they differ from clause5, justification for the duration of exposu

27、re in the two climates, successive measurements of general flatness, changes that have occurred in the measured values between5.2 and5.4, damage which has occurred during the test, date of the test. 1) Specific standards on the materials of doors can, if necessary, specify the relative humidity and

28、temperature values to be applied for storing in non-detrimental conditions. Nominal values Regulation deviations Temperature 23 C 2 C Relative humidity 85% 5% Nominal values Regulation deviations Temperature 23 C 2 C Relative humidity 30% 5%4 blankBS5369:1987 BSI 09-1999 National appendix A The Unit

29、ed Kingdom participation in the preparation of this European Standard was entrusted by the Elements and Components (of Diverse Materials) for Buildings Standards Committee (ECB/-) to Technical Committee ECB/17 upon which the following bodies were represented: Aluminium Window Association British Pla

30、stics Federation British Woodworking Federation Consumer Policy Committee of BSI Department of the Environment (Building Research Establishment, Princes Risborough Laboratory) Department of the Environment (Property Services Agency) Fibre Building Board Organization Fibre Cement Manufacturers Associ

31、ation Ltd. Flat Glass Manufacturers Association Greater London Council Guild of Architectural Ironmongers Incorporated Association of Architects and Surveyors Institution of Fire Engineers London Housing Consortium National House-Building Council Royal Institute of British Architects Timber Research

32、 and Development Association National appendix B The British Standard corresponding to the European Standard referred to in the text is as follows: European Standard British Standard EN 24:1974 BS 5277:1976 Doors. Measurement of defects of general flatness of door leaves.BS 5369:1987 EN 43:1985 BSI

33、389 Chiswick High Road London W4 4AL BSIBritishStandardsInstitution BSI is the independent national body responsible for preparing BritishStandards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter. Revisions BritishStandards are upda

34、ted by amendment or revision. Users of BritishStandards should make sure that they possess the latest amendments or editions. It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this BritishS

35、tandard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel:02089969000. Fax:02089967400. BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest edi

36、tions of standards. Buying standards Orders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel:02089969001. Fax:02089967001. In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that hav

37、e been published as BritishStandards, unless otherwise requested. Information on standards BSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also

38、available which give details on all its products and services. Contact the Information Centre. Tel:02089967111. Fax:02089967048. Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of these and o

39、ther benefits contact Membership Administration. Tel:02089967002. Fax:02089967001. Copyright Copyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the internationalstandardization bodies. Except as permitted under the Copyright, Designs and Paten

40、ts Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI. This does not preclude the free use, in the course of implementing the standard, of necessary

41、details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. If permission is granted, the terms may include royalty payments or a licensing agreement. Details and advice can be obtained from the Copyright Manager. Tel:02089967070.