BS 5592-1978 Size designation of clothes - headwear《服装尺寸标记 帽子》.pdf

1、BRITISH STANDARD BS 5592:1978 ISO 4417:1977 Size designation of clothes Headwear UDC 687.021:006.78:687.4BS5592:1978 This British Standard, having been prepared under the directionof the Clothing Standards Committee, was published under the authority ofthe Executive Board on 30June1978 BSI 10-1999 T

2、he following BSI references relate to the work on this standard: Committee reference CLT/1 Draft for comment 77/35001 DC ISBN 0 580 10212 2 Cooperating organizations The Clothing Standards Committee, under whose direction this British Standard was prepared, consists of representatives from the follo

3、wing Government departments and scientific and industrial organizations: Apparel and Fashion Industrys Association* British Footwear Manufacturers Federation British Man-made Fibres Federation British Railways Board British Textile Employers Association Clothing Institute* Clothing Manufacturers Fed

4、eration of Great Britain* Consumer Standards Advisory Committee of BSI* Consumers Association* Department of Industry, Chemicals and Textiles* Drapers Chamber of Trade* Knitting Industries Federation Ltd* Mail Order Traders Association of Great Britain* Ministry of Defence Multiple Shoe Retailers As

5、sociation Multiple Shops Federation* National Childrens Wear Association* National Shoe Retailers Council Retail Trading Standards Association Shoe and Allied Trades Research Association Textile and Clothing Contractors Association* Textile Research Council* Wholesale Footwear Distributors Associati

6、on The organizations marked with an asterisk in the above list, together with the following, were directly represented on the committee entrusted with the preparation of this British Standard: British Mantle Manufacturers Association Central Office of Information Co-operative Union Federation of Clo

7、thing Designers and Executives Independent Stores Association Manchester Chamber of Commerce and Industry Metrication Board Overall Manufacturers Association of Great Britain Retail Distributors Association, Incorporated Shirt, Collar and Tie Manufacturers Federation Textile Distributors Association

8、 Amendments issued since publication Amd. No. Date of issue CommentsBS5592:1978 BSI 10-1999 i Contents Page Cooperating organizations Inside front cover National foreword ii 0 Introduction 1 1 Scope and field of application 1 2 Reference 1 3 Control dimension 1 4 Size designation 1 5 Labelling 1 Fig

9、ure Examples of labels for headwear 2 Publications referred to Inside back coverBS5592:1978 ii BSI 10-1999 National foreword This British Standard is identical with ISO 4417 “Size designation of clothes Headwear”, which was developed by ISO/TC 133, Sizing systems and designations for clothes. It was

10、 prepared under the direction of the Clothing Standards Committee. Terminology and conventions. The text of the International Standard has been approved as suitable for publication, without deviation, as a BritishStandard. Some terminology and certain conventions are not identical with those used in

11、 British Standards; attention is especially drawn to the following. Wherever the words “International Standard” appear, referring to this standard, they should be interpreted as “British Standard”. Cross-reference. The following International Standard is referred to in the text and there is a corres

12、ponding British Standard; this is as given below. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obli

13、gations. International Standard Corresponding British Standard ISO 3635:1977 BS 5511:1977 Size designation of clothes Definitions and body measurement procedure (identical) Summary of pages This document comprises a front cover, an inside front cover, pagesi andii, pages1 and2, an inside back cover

14、and a back cover. This standard has been updated (see copyright date) and may have had amendments incorporated. This will be indicated in the amendment table on the inside front cover.BS5592:1978 BSI 10-1999 1 0 Introduction This International Standard is one of a series which deals essentially with

15、 the size designation of clothing, and is not directly concerned with sizing systems as such. The primary aim of this and other International Standards in this series, is the establishment of a size designation system that indicates (in a simple, direct and meaningful manner) the body size of the pe

16、rson that a garment is intended to fit. Provided that the shape of the persons body has been accurately determined, this system will facilitate the choice of garments that fit. The size designation system is based on body and not garment measurements. Choice of garment measurements is normally left

17、to the designer and the manufacturer, who are concerned with style, cut and other fashion elements, and who must make due allowance for garments normally worn beneath a specific outer garment or accessory. Definitions and body measurement procedure are prescribed in ISO 3635, which is applicable to

18、all categories of clothing. 1 Scope and field of application This International Standard establishes a system of designating the sizes of headwear. 2 Reference This International Standard should be read in conjunction with the following International Standard: ISO 3635, Size designation of clothes D

19、efinitions and body measurement procedure. 3 Control dimension The control dimension for headwear shall be: Head girth 4 Size designation 4.1 The size designation shall comprise the control dimension (see clause 3), in centimetres, of the intended wearer. Where practicable, the standard pictogram, a

20、s given in ISO 3635, should be used as a means of indicating the size designation. Where it is not practicable to use the standard pictogram, the control measurement shall be given, together with the statement of that dimension. NOTEThe above requirements shall not preclude the use, as specified by

21、the national standards organization concerned, of size designations shown as a range by stating the minimum and maximum control measurements separated by an oblique stroke or a hyphen. 4.2 Measurements of headwear items shall not be incorporated in the size designation but, where considered of value

22、, they may be indicated separately (see 5.3). 5 Labelling 5.1 Method The size designation of each headwear item shall be indicated clearly, conspicuously and in plainly legible form on a label, or on a swing ticket, or on both. Pictograms shall be large enough to ensure immediate understanding and n

23、umerals shall, in all cases, be readily discernible. 5.2 Attachment The label or swing ticket shall be securely attached to the headwear item and so positioned as to be easily readable. 5.3 Additional information Information additional to the size designation may be separately indicated on the label

24、, or on the swing ticket, or on both, provided that it does not in any way reduce the prominence and conspicuousness of the size designation. Such additional information may include a size code number or additional measurements considered to constitute useful information. 5.4 Examples of labels The

25、examples of labels given in the figure illustrate methods of labelling that range from the simple indication on the standard pictogram of the relevant control dimension to more elaborate forms that provide additional information, such as a size code number. Where the size designation is supplemented

26、 by a size code number, separation of the two, as illustrated, renders the size code number readily recognizable as being part of a system of size designation adopted by a national or limited population group only.BS5592:1978 2 BSI 10-1999 1) Example of additional information included in accordance

27、with sub-clause 5.3. Figure Examples of labels for headwearBS5592:1978 BSI 10-1999 Publications referred to See national foreword.BS 5592:1978 ISO 4417:1977 BSI 389 Chiswick High Road London W4 4AL BSIBritishStandardsInstitution BSI is the independent national body responsible for preparing BritishS

28、tandards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter. Revisions BritishStandards are updated by amendment or revision. Users of BritishStandards should make sure that they possess the latest amendments or editions. It is the con

29、stant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this BritishStandard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Te

30、l:02089969000. Fax:02089967400. BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards. Buying standards Orders for all BSI, international and foreign standards publications should be addressed to Customer S

31、ervices. Tel:02089969001. Fax:02089967001. In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as BritishStandards, unless otherwise requested. Information on standards BSI provides a wide range of information on nati

32、onal, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give details on all its products and services. Contact the Information Centre. Tel:02089967111. Fax:02089967048. Subscribin

33、g members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of these and other benefits contact Membership Administration. Tel:02089967002. Fax:02089967001. Copyright Copyright subsists in all BSI publications. BS

34、I also holds the copyright, in the UK, of the publications of the international standardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, photocopying

35、, recording or otherwise without prior written permission from BSI. This does not preclude the free use, in the course of implementing the standard, of necessary details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. If permission is granted, the terms may include royalty payments or a licensing agreement. Details and advice can be obtained from the Copyright Manager. Tel:02089967070.