BS 5655-10 1 1-1995 Lifts and service lifts - Specification for the testing and examination of lifts and service lifts - Electric lifts - Commissioning tests for new lifts《电梯与服务电梯 .pdf

1、BRITISH STANDARD BS 5655-10.1.1: 1995 Lifts and service lifts Part 10: Specification for the testing and examination of lifts and service lifts Section 10.1 Electric lifts Subsection 10.1.1 Commissioning tests for new lifts UDC 621.876.1523:620.16BS5655-10.1.1:1995 This British Standard, having been

2、 prepared under the directionof the Engineering SectorBoard, was published underthe authority of the Standards Board and comes intoeffect on 15 July 1995 BSI 01-1999 First published June 1986 Second edition July 1995 The following BSI references relate to the work on this standard: Committee referen

3、ce MHE/4 Draft for comment 93/708991 DC ISBN 0 580 23640 4 Committees responsible for this British Standard The preparation of this British Standard was entrusted to Technical Committee MHE/4, Lifts, hoists and escalators, upon which the following bodies were represented: Associated Offices Technica

4、l Committee Association of District Councils British Broadcasting Corporation British Lift Association British Railways Board British Retail Consortium British Telecommunications plc Chartered Institution of Building Services Engineers Department of the Environment Department of Trade and Industry (

5、Standards Policy Unit) Electrical, Electronic, Telecommunications and Plumbing Union Engineer Surveyors Section of the MSF Health and Safety Executive Independent Engineering Insurers Committee Institution of Electrical Engineers Institution of Environmental Health Officers Institution of Incorporat

6、ed Executive Engineers Institution of Mechanical Engineers Institution of Plant Engineers Lloyds Register of Shipping London Underground Ltd. National Association of Lift Makers Post Office Royal Association for Disability and Rehabilitation Amendments issued since publication Amd. No. Date Comments

7、BS5655-10.1.1:1995 BSI 01-1999 i Contents Page Committees responsible Inside front cover Foreword ii 1 Scope 1 2 References 1 3 Definitions 1 4 Test and examination 1 5 High-voltage test (at manufacturers works) 1 6 Electrical tests (after installation) 2 Table 1 Certificate of test and examination

8、for electric passenger and goods lifts 3 List of references Inside back coverBS5655-10.1.1:1995 ii BSI 01-1999 Foreword This Subsection of BS5655-10, prepared under the direction of the Engineering Sector Board, revises and replaces those elements of BS5655-10:1986 which cover the testing and examin

9、ation, at the time of installation, of new electric lifts covered by BS5655-1:1986. It is the first Subsection of the second Section of the tenth Part of this BritishStandard relating to lifts and service lifts. The complete standard consists of the following Parts. Part 1: Safety rules for the cons

10、truction and installation of electric lifts (implementing EN81-1), together with PD6500 Explanatory supplement to BS5655-1; Part 2: Safety rules for the construction and installation of hydraulic lifts (implementing EN81-2); Part 3: Specification for electric service lifts; Part 4 1) ; Part 5: Speci

11、fication for dimensions of standard lift arrangements; Part 6: Code of practice for selection and installation; Part 7: Specification for manual control devices, indicators and additional fittings; Part 8: Specification for eyebolts for lift suspension; Part 9: Specification for guide rails; Part 10

12、: (Seebelow); Part 11: Recommendations for the installation of new, and the modernization of, electric lifts in existing buildings; Part 12: Recommendations for the installation of new, and the modernization of, hydraulic lifts in existing buildings; Part 13 2) : Code of practice. Recommendations fo

13、r vandal resistant lifts; Part 14 2) : Specification for hand-powered service lifts. Further Parts are anticipated. This Subsection is applicable to new electric lifts manufactured and installed in accordance with BS5655-2:1988. The complete Part10 consists of the following Sections and Subsections.

14、 Section 10.1: Electric lifts; Subsection 10.1.1: Commissioning tests for new lifts; Subsection 10.1.2 2) : Commissioning tests after modernization; Subsection 10.1.3 2) : Periodic examination; Section 10.2: Hydraulic lifts; Subsection 10.2.1: Commissioning tests for new lifts; Subsection 10.2.2 2)

15、: Commissioning tests after modernization; Subsection 10.2.3 2) : Periodic examination. Further Sections are anticipated. BS5655-10 has been revised to take account of experience gained in the field since its initial publication in1986. Additionally, it has been restructured in the form of separate

16、Sections and Subsections to differentiate clearly between lift types, and between tests and examinations performed at the time of installation, and examinations which take place over the life of a lift installation. 1) Reserved for future publication. 2) In preparation.BS5655-10.1.1:1995 BSI 01-1999

17、 iii As successive Subsections of Sections10.1 and 10.2 are published, they will revise and replace the corresponding sections of BS5655-10:1986. On publication of the complete Sections10.1 and10.2, BS5655-10:1986 will be withdrawn. Copyright is waived by BSI in respect of the table in this standard

18、. Enquiries concerning bulk printed supplies of the form in this table should be addressed to BSI Customer Services, Sales Department, at Chiswick (see back cover for address). A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are r

19、esponsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, pages i to iv, pages1to 22, an inside back cover and a back cover. This standard has

20、been updated (see copyright date) and may have had amendments incorporated. This will be indicated in the amendment table on theinside front cover.iv blankBS5655-10.1.1:1995 BSI 01-1999 1 1 Scope This Subsection of BS5655 specifies requirements for the testing and examination of new electric lifts c

21、overed by BS5655-1:1986, before the lift is put into service. NOTE 1Italic type is used inTable 1 where there is a reference to a requirement of BS5655-1:1986. This Subsection does not specify such requirements for electric lifts after modernization, or for the periodic examination of electric lifts

22、. This Subsection includes a proforma for a certificate of test and examination (Table 1) which covers construction, certain aspects of performance, and contract data. A requirement to provide test certificates relating to certain components of the equipment is also specified in this Subsection. NOT

23、E 2Guidance on testing and inspection is given in section2 of BS5655-6. 2 References 2.1 Normative references This Subsection of BS5655-10 incorporates, by dated or undated reference, provisions from other publications. These normative references are made at the appropriate places in the text and th

24、e cited publications are listed on the inside back cover. For dated references, only the edition cited applies; any subsequent amendments to or revisions of the cited publication apply to this Subsection of BS5655-10 only when incorporated in the reference by amendment or revision. For undated refer

25、ences, the latest edition of the cited publication applies, together with any amendments. 2.2 Informative references This Subsection of BS5655-10 refers to other publications that provide information or guidance. Editions of these publications current at the time of issue of this standard are listed

26、 on the inside back cover, but reference should be made to the latest editions. 3 Definitions For the purposes of this Subsection of BS5655-10, the definitions given in clause3 of BS5655-1:1986 apply. 4 Test and examination NOTEAll test weights, test equipment, instruments and personnel needed to co

27、mplete the testing and examination after installation should be provided by the lift contractor. A power supply at the appropriate voltage and frequency, for test and adjustment purposes, should be provided by the purchaser. 4.1 The tests, and a thorough inspection of the entire equipment, necessary

28、 to complete a test and examination certificate following the form and content ofTable 1, shall be performed for every installation before it is put into normal service, i.e.at the time of commissioning. The certificate shall be completed in all respects. The installation shall also be tested in acc

29、ordance with clauses5 and6. 4.2 Copies of test certificates relating to particular components shall be available prior to, or during, commissioning tests. These test certificates shall relate to individual or type tests carried out by the component manufacturer, the lift contractor, or an independen

30、t body. 4.3 Copies of completed certificates appropriate to the type of equipment, as specified in4.1 shall be available for inspection in accordance with16.2.2 of BS5655-1:1986. 5 High-voltage test (at manufacturers works) The dielectric of electrical apparatus (excluding motors, generators, transf

31、ormers, electronic apparatus and instruments, which should be tested in accordance with the appropriate British Standard), shall withstand a test voltage of 10 times the working voltage, with a maximum of 2 000 V, when applied as follows: a) between the live parts and the case or the frame with all

32、circuits completed; b) between main terminals or equivalent parts with all circuits open; c) between any live parts of independent circuits. The test voltage shall be alternating, of approximately sine wave form, with a frequency of approximately50Hz, and shall be applied for1min. NOTEAs it is impra

33、ctical to apply the foregoing tests b) and c) on controllers and similar apparatus after controller wiring has been completed, these tests should be made at convenient stages of manufacture. A test certificate to this effect issued by the manufacturer is acceptable.BS5655-10.1.1:1995 2 BSI 01-1999 6

34、 Electrical tests (after installation) Electrical installations, excluding electronic equipment, shall be subjected to tests, by instruments, as follows. a) Apply a d.c. test voltage which is not less than twice the r.m.s. value of the a.c. supply voltage, or not greater than 500Vd.c. for low-voltag

35、e circuits, to prove that the insulation resistance to earth is not less than 0.5MW. NOTEIf dampness in a new building prevents a reading of0.5MW from being obtained, an insulation resistance of0.25MW is provisionally acceptable provided a retest figure of0.5MW is obtained when conditions in the bui

36、lding improve. b) Determine that the earthing of all conduit, trunking, switchcases, and similar metal work is continuous and does not exceed 0.5W impedance. NOTEA lift installation is considered to be a self-contained piece of equipment and as such is not required to conform in all respects to BS76

37、71:1992 (formerly the IEE Regulations for Electrical Installations), in particular with regard to the earthing of all apparatus, e.g. guides, door panels.BS5655-10.1.1:1995 BSI 01-1999 3 Table 1 Certificate of test and examination for electric passenger and goods liftsBS5655-10.1.1:1995 4 BSI 01-199

38、9 Table 1 Certificate of test and examination for electric passenger and goods liftsBS5655-10.1.1:1995 BSI 01-1999 5 Table 1 Certificate of test and examination for electric passenger and goods liftsBS5655-10.1.1:1995 6 BSI 01-1999 Table 1 Certificate of test and examination for electric passenger a

39、nd goods liftsBS5655-10.1.1:1995 BSI 01-1999 7 Table 1 Certificate of test and examination for electric passenger and goods liftsBS5655-10.1.1:1995 8 BSI 01-1999 Table 1 Certificate of test and examination for electric passenger and goods liftsBS5655-10.1.1:1995 BSI 01-1999 9 Table 1 Certificate of

40、test and examination for electric passenger and goods liftsBS5655-10.1.1:1995 10 BSI 01-1999 Table 1 Certificate of test and examination for electric passenger and goods liftsBS5655-10.1.1:1995 BSI 01-1999 11 Table 1 Certificate of test and examination for electric passenger and goods liftsBS5655-10

41、.1.1:1995 12 BSI 01-1999 Table 1 Certificate of test and examination for electric passenger and goods liftsBS5655-10.1.1:1995 BSI 01-1999 13 Table 1 Certificate of test and examination for electric passenger and goods liftsBS5655-10.1.1:1995 14 BSI 01-1999 Table 1 Certificate of test and examination

42、 for electric passenger and goods liftsBS5655-10.1.1:1995 BSI 01-1999 15 Table 1 Certificate of test and examination for electric passenger and goods liftsBS5655-10.1.1:1995 16 BSI 01-1999 Table 1 Certificate of test and examination for electric passenger and goods liftsBS5655-10.1.1:1995 BSI 01-199

43、9 17 Table 1 Certificate of test and examination for electric passenger and goods liftsBS5655-10.1.1:1995 18 BSI 01-1999 Table 1 Certificate of test and examination for electric passenger and goods liftsBS5655-10.1.1:1995 BSI 01-1999 19 Table 1 Certificate of test and examination for electric passen

44、ger and goods liftsBS5655-10.1.1:1995 20 BSI 01-1999 Table 1 Certificate of test and examination for electric passenger and goods liftsBS5655-10.1.1:1995 BSI 01-1999 21 Table 1 Certificate of test and examination for electric passenger and goods lifts22 blankBS5655-10.1.1:1995 BSI 01-1999 List of re

45、ferences (seeclause 2) Normative references BSI publications BRITISH STANDARDS INSTITUTION, London BS 5588, Fire precautions in the design, construction and use of buildings. BS 5588-5:1991, Code of practice for firefighting stairs and lifts. BS 5588-8:1988, Code of practice for means of escape for

46、disabled people. BS 5655, Lifts and service lifts. BS 5655-1:1986, Safety rules for constructions and installation of electric lifts. BS 5655-6:1990, Code of practice for selection and installation. BS 5655-8:1983, Specification for eyebolts for lift suspension. Informative reference BSI publication

47、s BRITISH STANDARDS INSTITUTION, London BS 7671:1992, Requirements for electrical installations. IEE Wiring Regulations. Sixteenth edition. BSI 389 Chiswick High Road London W4 4AL | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |

48、 | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | BSI British Standards Institution BSI is the independent national body responsible for preparing British Standards. It presents the UK view on standards in Europe an

49、d at the international level. It is incorporated by Royal Charter. Revisions British Standards are updated by amendment or revision. Users of British Standards should make sure that they possess the latest amendments or editions. It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical