BS 5655-10 2 1-1995 Lifts and service lifts - Specification for the testing and examination of lifts and service lifts - Hydraulic lifts - Commissioning tests for new lifts《电梯与服务电梯.pdf

1、BRITISH STANDARD BS 5655-10.2.1: 1995 Lifts and service lifts Part 10: Specification for the testing and examination of lifts and service lifts Section 10.2 Hydraulic lifts Subsection 10.2.1 Commissioning tests for new lifts UDC 621.876.1-522:620.16BS5655-10.2.1:1995 This British Standard, having be

2、en prepared under the direction of the Engineering Sector Board, was published under the authority of the Standards Board and comesintoeffect on 15 July 1995 BSI 05-1999 First published June 1986 Second edition July 1995 The following BSI references relate to the work on this standard: Committee ref

3、erence MHE/4 Draft for comment 93/708992 DC ISBN 0 580 23641 2 Committees responsible for this British Standard The preparation of this British Standard was entrusted to Technical Committee MHE/4, Lifts, hoists and escalators, upon which the following bodies were represented: Associated Offices Tech

4、nical Committee Association of District Councils British Broadcasting Corporation British Lift Association British Railways Board British Retail Consortium British Telecommunications plc Chartered Institution of Building Services Engineers Department of the Environment Department of Trade and Indust

5、ry (Standards Policy Unit) Electrical, Electronic, Telecommunications and Plumbing Union Engineer Surveyors Section of the MSF Health and Safety Executive Independent Engineering Insurers Committee Institution of Electrical Engineers Institution of Environmental Health Officers Institution of Incorp

6、orated Executive Engineers Institution of Mechanical Engineers Institution of Plant Engineers Lloyds Register of Shipping London Underground Ltd. National Association of Lift Makers Post Office Royal Association for Disability and Rehabilitation Amendments issued since publication Amd. No. Date Comm

7、entsBS5655-10.2.1:1995 BSI 05-1999 i Contents Page Committees responsible Inside front cover Foreword ii 1 Scope 1 2 References 1 3 Definitions 1 4 Test and examination 1 5 High-voltage test (at manufacturers works) 1 6 Electrical test (after installation) 2 Table 1 Certificate of test and examinati

8、on for hydraulic passenger and goods lifts 3 List of references Inside back coverBS5655-10.2.1:1995 ii BSI 05-1999 Foreword This Subsection of BS 5655-10, prepared under the direction of the Engineering Sector Board, revises and replaces those elements of BS 5655-10:1986 which cover the testing and

9、examination, at the time of installation, of new hydraulic lifts covered by BS 5655-2:1988. It is the first Subsection of the second Section of the tenth Part of this British Standard relating to lifts and service lifts. The complete standard consists of the following Parts. Part 1: Safety rules for

10、 the construction and installation of electric lifts (implementing EN 81-1), together with PD 6500 Explanatory supplement to BS5655-1; Part 2: Safety rules for the construction and installation of hydraulic lifts (implementing EN 81-2); Part 3: Specification for electric service lifts; Part 4 1) : P

11、art 5: Specification for dimensions of standard lift arrangements; Part 6: Code of practice for selection and installation; Part 7: Specification for manual control devices, indicators and additional fittings; Part 8: Specification for eyebolts for lift suspension; Part 9: Specification for guide ra

12、ils; Part 10: (See below); Part 11: Recommendations for the installation of new, and the modernization of, electric lifts in existing buildings; Part 12: Recommendations for the installation of new, and the modernization of, hydraulic lifts in existing buildings; Part 13 2) : Code of practice. Recom

13、mendations for vandal resistant lifts; Part 14 2) : Specification for hand-powered service lifts. Further Parts are anticipated. This Subsection is applicable to new hydraulic lifts manufactured and installed in accordance with BS 5655-2:1988. The complete Part 10 consists of the following Sections

14、and Subsections. Section 10.1: Electric lifts; Subsection 10.1.1: Commissioning tests for new lifts; Subsection 10.1.2 2) : Commissioning tests after modernization; Subsection 10.1.3 2) : Periodic examination; Section 10.2: Hydraulic lifts; Subsection 10.2.1: Commissioning tests for new lifts; Subse

15、ction 10.2.2 2) : Commissioning tests after modernization; Subsection 10.2.3 2) : Periodic examination. Further Sections are anticipated. BS 5655-10 has been revised to take account of experience gained in the field since its initial publication in 1986. Additionally, it has been restructured in the

16、 form of separate Sections and Subsections to differentiate clearly between lift types, and between tests and examinations performed at the time of installation, and examinations which take place over the life of a lift installation. 1) Reserved for future publication. 2) In preparation.BS5655-10.2.

17、1:1995 BSI 05-1999 iii As successive Subsections of Sections 10.1 and 10.2 are published, they will revise and replace the corresponding sections of BS 5655-10:1986. On publication of the complete Sections 10.1 and 10.2, BS 5655-10:1986 will be withdrawn. Copyright is waived by BSI in respect of the

18、 table in this standard. Enquiries concerning bulk printed supplies of the form in this table should be addressed to BSI Customer Services, Sales Department, at Chiswick (see back cover for address). A British Standard does not purport to include all the necessary provisions of a contract. Users of

19、British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, pages i to iv, pages1to 22, an inside back cover and a back co

20、ver. This standard has been updated (see copyright date) and may have had amendments incorporated. This will be indicated in the amendment table on the inside front cover.iv blankBS5655-10.2.1:1995 BSI 05-1999 1 1 Scope This Subsection of BS 5655 specifies requirements for the testing and examinatio

21、n of new hydraulic lifts covered by BS 5655-2:1988, before the lift is put into service. NOTE 1Italic type is used in Table 1 where there is a reference to a requirement of BS 5655-2:1988. This Subsection does not specify such requirements for hydraulic lifts after modernization, or for the periodic

22、 examination of hydraulic lifts. This Subsection includes a proforma for a certificate of test and examination (Table 1) which covers construction, certain aspects of performance, and contract data. A requirement to provide test certificates relating to certain components of the equipment is also sp

23、ecified in this Subsection. NOTE 2Guidance on testing and inspection is given in section2 of BS 5655-6. 2 References 2.1 Normative references This Subsection of BS 5655-10 incorporates, by dated or undated reference, provisions from other publications. These normative references are made at the appr

24、opriate places in the text and the cited publications are listed on the inside back cover. For dated references, only the edition cited applies; any subsequent amendments to or revisions of the cited publication apply to this Subsection of BS 5655-10 only when incorporated in the reference by amendm

25、ent or revision. For undated references, the latest edition of the cited publication applies, together with any amendments. 2.2 Informative references This Subsection of BS 5655-10 refers to other publications that provide information or guidance. Editions of these publications current at the time o

26、f issue of this standard are listed on the inside back cover, but reference should be made to the latest editions. 3 Definitions For the purposes of this Subsection of BS 5655-10, the definitions given in clause 3 of BS 5655-2:1988 apply. 4 Test and examination NOTEAll test weights, test equipment,

27、instruments and personnel needed to complete the testing and examination after installation should be provided by the lift contractor. A power supply at the appropriate voltage and frequency, for test and adjustment purposes, should be provided by the purchaser. 4.1 The tests, and a thorough inspect

28、ion of the entire equipment, necessary to complete a test and examination certificate following the form and content of Table 1, shall be performed for every installation before it is put into normal service, i.e.at the time of commissioning. The certificate shall be completed in all respects. The i

29、nstallation shall also be tested in accordance with clauses 5 and6. 4.2 Copies of test certificates relating to particular components shall be available prior to, or during, commissioning tests. These test certificates shall relate to individual or type tests carried out by the component manufacture

30、r, the lift contractor, or an independent body. 4.3 Copies of completed certificates appropriate to the type of equipment, as specified in 4.1 shall be available for inspection in accordance with 16.2.2 of BS 5655-2:1988. 5 High-voltage test (at manufacturers works) The dielectric of electrical appa

31、ratus (excluding motors, generators, transformers, electronic apparatus and instruments, which should be tested in accordance with the appropriate British Standard), shall withstand a test voltage of 10times the working voltage, with a maximum of 2000V, when applied as follows: a) between the live p

32、arts and the case or the frame with all circuits completed; b) between main terminals or equivalent parts with all circuits open; c) between any live parts of independent circuits. The test voltage shall be alternating, of approximately sine wave form, with a frequency of approximately 50Hz, and sha

33、ll be applied for 1min. NOTEAs it is impractical to apply the foregoing tests b) and c) on controllers and similar apparatus after controller wiring has been completed, these tests should be made at convenient stages of manufacture. A test certificate to this effect issued by the manufacturer is acc

34、eptable.BS5655-10.2.1:1995 2 BSI 05-1999 6 Electrical tests (after installation) Electrical installations, excluding electronic equipment, shall be subjected to tests, by instruments, as follows. a) Apply a d.c. test voltage which is not less than twice the r.m.s. value of the a.c. supply voltage, o

35、r not greater than 500V d.c. for low-voltage circuits, to prove that the insulation resistance to earth is not less than 0.5M7. NOTEIf dampness in a new building prevents a reading of0.5M7 from being obtained, an insulation resistance of0.25M7 is provisionally acceptable provided a retest figure of0

36、.5M7 is obtained when conditions in the building improve. b) Determine that the earthing of all conduit, trunking, switchcases, and similar metal work is continuous and does not exceed 0.57 impedance. NOTEA lift installation is considered to be a self-contained piece of equipment and as such is not

37、required to conform in all respects to BS 7671:1992 (formerly the IEE Regulations for Electrical Installations), in particular with regard to the earthing of all apparatus, e.g. guides, door panels.BS5655-10.2.1:1995 BSI 05-1999 3 Table 1 Certificate of test and examination for hydraulic passenger a

38、nd goods liftsBS5655-10.2.1:1995 4 BSI 05-1999 Table 1 Certificate of test and examination for hydraulic passenger and goods lifts BS5655-10.2.1:1995 BSI 05-1999 5 Table 1 Certificate of test and examination for hydraulic passenger and goods lifts BS5655-10.2.1:1995 6 BSI 05-1999 Table 1 Certificate

39、 of test and examination for hydraulic passenger and goods lifts BS5655-10.2.1:1995 BSI 05-1999 7 Table 1 Certificate of test and examination for hydraulic passenger and goods lifts BS5655-10.2.1:1995 8 BSI 05-1999 Table 1 Certificate of test and examination for hydraulic passenger and goods lifts B

40、S5655-10.2.1:1995 BSI 05-1999 9 Table 1 Certificate of test and examination for hydraulic passenger and goods lifts BS5655-10.2.1:1995 10 BSI 05-1999 Table 1 Certificate of test and examination for hydraulic passenger and goods lifts BS5655-10.2.1:1995 BSI 05-1999 11 Table 1 Certificate of test and

41、examination for hydraulic passenger and goods lifts BS5655-10.2.1:1995 12 BSI 05-1999 Table 1 Certificate of test and examination for hydraulic passenger and goods lifts BS5655-10.2.1:1995 BSI 05-1999 13 Table 1 Certificate of test and examination for hydraulic passenger and goods lifts BS5655-10.2.

42、1:1995 14 BSI 05-1999 Table 1 Certificate of test and examination for hydraulic passenger and goods lifts BS5655-10.2.1:1995 BSI 05-1999 15 Table 1 Certificate of test and examination for hydraulic passenger and goods lifts BS5655-10.2.1:1995 16 BSI 05-1999 Table 1 Certificate of test and examinatio

43、n for hydraulic passenger and goods lifts BS5655-10.2.1:1995 BSI 05-1999 17 Table 1 Certificate of test and examination for hydraulic passenger and goods lifts BS5655-10.2.1:1995 18 BSI 05-1999 Table 1 Certificate of test and examination for hydraulic passenger and goods lifts BS5655-10.2.1:1995 BSI

44、 05-1999 19 Table 1 Certificate of test and examination for hydraulic passenger and goods lifts BS5655-10.2.1:1995 20 BSI 05-1999 Table 1 Certificate of test and examination for hydraulic passenger and goods lifts BS5655-10.2.1:1995 BSI 05-1999 21 Table 1 Certificate of test and examination for hydr

45、aulic passenger and goods lifts BS5655-10.2.1:1995 22 BSI 05-1999 Table 1 Certificate of test and examination for hydraulic passenger and goods lifts BS5655-10.2.1:1995 BSI 05-1999 List of references (see clause 2) Normative references BSI publications BRITISH STANDARDS INSTITUTION, London BS 5588,

46、Fire precautions in the design, construction and use of buildings. BS 5588-5:1991, Code of practice for firefighting stairs and lifts. BS 5588-8:1988, Code of practice for means of escape for disabled people. BS 5655, Lifts and service lifts. BS 5655-2:1988, Safety rules for the construction and ins

47、tallation of hydraulic lifts. BS 5655-6:1990, Code of practice for selection and installation. BS 5655-8:1983, Specification for eyebolts for lift suspension. Informative reference BSI publications BRITISH STANDARDS INSTITUTION, London BS 7671:1992, Requirements for electrical installations, IEE Wir

48、ing Regulations. Sixteenth edition.BS 5655-10.2.1: 1995 BSI 389 Chiswick High Road London W4 4AL BSIBritishStandardsInstitution BSI is the independent national body responsible for preparing BritishStandards. It presents the UK view on standards in Europe and at the international level. It is incorp

49、orated by Royal Charter. Revisions BritishStandards are updated by amendment or revision. Users of BritishStandards should make sure that they possess the latest amendments or editions. It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this BritishStandard would inform the Secretary of the technical committee responsible, the identity of w