BS 5656-3-2014 Safety rules for the construction and installation of escalators and moving walks Examination and test of new moving walks before putting into service Specification .pdf

1、BSI Standards PublicationBS 5656-3:2014Safety rules for theconstruction and installationof escalators and movingwalks Part 3: Examination and test of newmoving walks before putting intoservice Specification for means ofdetermining compliance withBS EN 115-1:2008+A1:2010Publishing and copyright infor

2、mationThe BSI copyright notice displayed in this document indicates when the documentwas last issued. The British Standards Institution 2014Published by BSI Standards Limited 2014ISBN 978 0 580 86163 5ICS 91.140.90The following BSI references relate to the work on this document:Committee reference M

3、HE/4Draft for comment 14/30298807 DCPublication historyFirst published July 2014Amendments issued since publicationDate Text affectedBS 5656-3:2014 BRITISH STANDARDContentsForeword ii1 Scope 12 Normative references 13 Terms and definitions 14 Examination and test of moving walks and components 1Bibl

4、iography 24List of tablesTable 1 Result of examination and test for moving walks Description ofinstallation 2Table 2 Result of examination and test for moving walks Information 7Table 3 Result of examination and test for moving walks Physicalarrangements 9Table 4 Result of examination and test for m

5、oving walks Lighting, insulationand earthing 11Table 5 Result of examination and test for moving walks Clearances 12Table 6 Result of examination and test for moving walks Electric safetydevices 13Table 7 Result of examination and test for moving walks Control devices 16Table 8 Result of examination

6、 and test for moving walks Pallet/belts,handrails, balustrades and surrounds 17Table 9 Result of examination and test for moving walks Stoppingdistances 19Table 10 Result of examination and test for moving walks Motor(s)measurements 20Table 11 Result of examination and test for moving walks Confirma

7、tion ofconformity to BS EN 115-1:2008+A1:2010 21Table 12 Result of examination and test for moving walks Additionalrequirements for shopping trolleys and baggage carts as specifiedin BS EN 115-1:2008+A1:2010, Annex I.1 22Summary of pagesThis document comprises a front cover, an inside front cover, p

8、ages i to iv,pages 1 to 26, an inside back cover and a back cover.BRITISH STANDARD BS 5656-3:2014 The British Standards Institution 2014 iForewordPublishing informationThis part of BS 5656 is published by BSI Standards Limited, under licence fromThe British Standards Institution, and came into effec

9、t on 31 July 2014. It wasprepared by Technical Committee MHE/4, Lifts, hoists and escalators. A list oforganizations represented on this committee can be obtained on request to itssecretary.SupersessionTogether with BS 5656-1:2013, this part of BS 5656 supersedes BS 5656-1:1997,which is withdrawn.Re

10、lationship with other publicationsBS 5656 is published in three parts: Part 1: Examination and test of new escalators before putting into service Specification for means of determining compliance withBS EN 115-1:2008+A1:2010; Part 2: Code of practice for the selection, installation and location of n

11、ewescalators and moving walks; Part 3: Examination and test of new moving walks before puttinginto service Specification for means of determining compliance withBS EN 115-1:2008+A1:2010.This part of BS 5656 is intended to be read in conjunction withBS EN 115-1:2008+A1:2010.Information about this doc

12、umentThis is a new part of the BS 5656 series. It has been developed to take intoaccount the publication of BS 5656-1:2013, which no longer covers movingwalks, and of BS EN 115-1:2008+A1:2010.The Machinery Directive 2006/42/EC 1 requires the manufacturer of a movingwalk to take responsibility for it

13、s design and manufacture.The Directive requires that before putting a moving walk into service it shallhave undergone certain procedures including final inspection and test.The inspection and test procedures in this part of BS 5656 may be undertaken bythe supplier or their representative, provided t

14、hat they have an appropriatequality assurance system and/or can demonstrate the necessary competence toundertake the work.The level of quality assurance can vary in accordance with which conformityassessment route applies, details of which are given in BS EN ISO 9000.In order to prove the competence

15、 of the persons carrying out the testing of themoving walk it is necessary that they operate in accordance with a qualityassurance system monitored by a Notified Body, under the requirements of theSupply of Machinery (Safety) Regulations 2008 2. It might be necessary to makeavailable certification o

16、f the quality assurance system in order to provecompliance.This part of BS 5656 specifies a means of determining compliance withBS EN 115-1:2008+A1:2010. It does not cover every clause inBS EN 115-1:2008+A1:2010 as many requirements are covered by themanufacturers quality control procedures.BRITISH

17、STANDARDBS 5656-3:2014ii The British Standards Institution 2014This part of BS 5656 covers the tests in BS EN 115-1:2008+A1:2010, 7.3, as well astests that do not fall within the manufacturers quality control system; forexample, the surroundings of the moving walk to ensure conformity toarrangement

18、drawings.Use of this documentIt has been assumed in the preparation of this British Standard that theexecution of its provisions will be entrusted to appropriately qualified andexperienced people, for whose use it has been produced.Attention is particularly drawn to the recommendations for safe work

19、ingpractices provided in BS 7801.BSI permits the reproduction of the tables in this part of BS 5656. Thisreproduction is only permitted where it is necessary for the user to recordfindings on the tables during each application of the standard.The following documents are required for the examination

20、and tests to becarried out: general arrangement drawing; electrical schematic drawing; copies of test certificates; Notified Body approvals, certificates of incorporation, certificates ofconformity (if applicable); risk assessments for deviations from BS EN 115-1:2008+A1:2010 (if any).This part of B

21、S 5656 is not intended to be used for existing installations, forwhich the relevant test procedures are those that were applicable at the time ofinstallation. BS 5656-1:1997 may still be used to carry out any examinations ortesting required when changes are made to moving walks installed inconformit

22、y to BS EN 115:1995, BS EN 115:1995 incorporating AmendmentNo.1(5.1.5.8 pertaining to hand rails) and BS EN 115:1995 incorporatingAmendment No. 2 (5.1.5.6.3 pertaining to deflector devices).Relevant tests from this part of BS 5656 may be applied to existing movingwalks that are upgraded in accordanc

23、e with either BS EN 115-1:2008+A1:2010 orBS EN 115-2, where for example, components are fitted that were not availableat the time of installation and which require examination and test, e.g. theinstallation of deflector devices.Although this standard specifically addresses conformity withBS EN 115-1

24、:2008+A1:2010, it also includes provision for the testing of othercommonly installed features on new moving walks, e.g. comb lighting.Presentational conventionsThe provisions of this standard are presented in roman (i.e. upright) type.Its requirements are expressed in sentences in which the principa

25、l auxiliary verbis “shall”.Commentary, explanation and general informative material is presented insmaller italic type, and does not constitute a normative element.It is recognized that certain tests/checks can be carried out more effectivelybefore installation, and that others should only be made o

26、n site. Answer boxesin this part of BS 5656 that contain a shaded square imply that the test shouldbe carried out on site.BRITISH STANDARD BS 5656-3:2014 The British Standards Institution 2014 iiiContractual and legal considerationsThis publication does not purport to include all the necessary provi

27、sions of acontract. Users are responsible for its correct application.Compliance with a British Standard cannot confer immunity from legalobligations.Particular attention is drawn to the following legislation: Supply of Machinery (Safety) Regulations 2008 2; Equality Act 2010 3; Electricity at Work

28、Regulations 1989 4; Electromagnetic Compatibility Regulations 1992 5; Electric Equipment (Safety) Regulations 1994 6; Health and Safety at Work, etc. Act 1974 7; Provision and Use of Work Equipment Regulations 1998 8; Workplace (Health, Safety and Welfare) Regulations 1992 9.NOTE This list is not ex

29、haustive.BRITISH STANDARDBS 5656-3:2014iv The British Standards Institution 20141 ScopeThis part of BS 5656 specifies one means of determining compliance with theprovisions for examination, testing and recording results for new moving walksspecified in BS EN 115-1:2008+A1:2010, before putting into s

30、ervice.2 Normative referencesThe following documents, in whole or in part, are normatively referenced in thisdocument and are indispensable for its application. For dated references, onlythe edition cited applies. For undated references, the latest edition of thereferenced document (including any am

31、endments) applies.BS 7801:2011, Escalators and moving walks Code of practice for safe workingon escalators and moving walksBS EN 115-1:2008+A1:2010, Safety of escalators and moving walks Constructionand installation3 Terms and definitionsFor the purposes of this part of BS 5656 the terms and definit

32、ions givenin BS EN 115-1:2008+A1 apply.4 Examination and test of moving walks andcomponentsNOTE 1 It is essential to ensure that the safety requirements ofBS EN 115-1:2008+A1 are all met and the associated risks addressed.When the examination and tests specified in BS EN 115-1:2008+A1 are carriedout

33、, the results shall be recorded using the questionnaires given in Table 1to Table 12 of this part of BS 5656.All questions on the questionnaires shall be answered.NOTE 2 Answer boxes in the questionnaires that contain a shaded square indicatethat the test/answer should be made on site. Plain answer

34、boxes should becompleted by the vendors design office.NOTE 3 The word “Specified” in a questionnaire indicates information to beprovided by the equipment designer.For identification purposes, all details shall be based upon looking from thebottom of the inclined moving walk irrespective of the direc

35、tion of travel andshall be marked by numbers or letters reading from left to right.Where horizontal moving walks are installed then, for identification purposes,all details shall be based on the direction of travel.Moving walks shall be tested for both directions of travel regardless of theintended

36、final direction of travel.BRITISH STANDARD BS 5656-3:2014 The British Standards Institution 2014 1Table 1 Result of examination and test for moving walks Description of installation (1 of 5)Do the requirements of BS EN 115-1:2008+A1, Annex Iapply? If Yes then complete Table 12.No YesConfirm that neg

37、otiations have been made in accordancewith BS EN 115-1:2008+A1, Introduction.No YesPurchasers nameEquipment location Vendors nameVendors equipment ID Purchasers equipment IDVertical rise (m) Angle of inclination ()Nominal pallet/belt width (mm) Nominal speed (m/s)Installation configurationSingle uni

38、t ParallelCriss-cross SuccessivePower supply Specified Power supply Actual at time of testVoltage (V) Voltage (V)Phases PhasesFrequency (Hz) Frequency (Hz)Wire 3, 4 or 5 Wire 3, 4 or 5Fuse rating Fuse ratingFuse type Fuse typeBRITISH STANDARDBS 5656-3:20142 The British Standards Institution 2014Tabl

39、e 1 Result of examination and test for moving walks Description of installation (2 of 5)Is power supply at the time of testsatisfactory?No YesHas a permanent power supply beenprovided at the time of test?No YesNOTE If the power supply is not permanent at the time of test then thepower-related tests

40、might need to be repeated prior to entering into service.Location of machineInside truss Outside trussLocation of control panelWithin truss In separatemachine roomOther specifyType of moving walkPallet BeltType of driveChain OtherType of drive controllerDirect on line Inverter (VVVF)Soft start Other

41、Moving walk motor (s) Specified Moving walk motor(s) SuppliedNo. of motors No. of motorsManufacturer ManufacturerSerial no(s). Serial no(s).Type TypeVoltageVVoltageVBRITISH STANDARD BS 5656-3:2014 The British Standards Institution 2014 3Table 1 Result of examination and test for moving walks Descrip

42、tion of installation (3 of 5)Moving walk motor (s) Specified (cont.) Moving walk motor(s) Supplied (cont.)PowerkWPowerkWCurrentACurrentASpeedrpmSpeedrpmInsulation class Insulation classDuty DutyGear(s) Specified Gear(s) SuppliedNo. of gears No. of gearsManufacturer ManufacturerSerial no(s). Serial n

43、o(s).Type of gear Specified Type of gear SuppliedPlanetary PlanetaryWorm/wheel Worm/wheelHelical HelicalOther OtherRatio RatioWhere applicable, is the oil level correct?No YesOperational brake(s) (see BS EN 115-1:2008+A1, 5.4.2.1)Type of brake Specified Type of brake SuppliedElectromechanical Electr

44、omechanicalOther: specify Other: suppliedNumber of brakes Specified FittedLocationBRITISH STANDARDBS 5656-3:20144 The British Standards Institution 2014Table 1 Result of examination and test for moving walks Description of installation (4 of 5)Auxiliary brake(s) (see BS EN 115-1:2008+A1, 5.4.2.2)N/A

45、Number of brakes Specified FittedLocationPallet/belt chain(s) lubricationIs chain lubrication required?No YesIf yes, specify typeIs the chain lubrication operatingcorrectly?No YesAuxiliary chain(s) lubricationIs auxiliary chain lubrication required?No YesIf yes, specify typeIs the auxiliary chain lu

46、brication operating correctly?No YesMain drive chain lubricationIs main drive chain lubrication required?No YesIf yes, specify typeIs the main drive chain lubrication operating correctly?No YesOtherIs a hand winding device fitted?No YesBRITISH STANDARD BS 5656-3:2014 The British Standards Institutio

47、n 2014 5Table 1 Result of examination and test for moving walks Description of installation (5 of 5)Is standby operation fitted (reduced speed)?No YesIs on-demand starting fitted?No YesIs remote starting fitted?No YesIs all of the above in accordance with the information on thelayout drawing/wiring

48、diagram or the other informationsheets?No YesBRITISH STANDARDBS 5656-3:20146 The British Standards Institution 2014Table 2 Result of examination and test for moving walks Information (1 of 2)Confirm that the vendor holds the information required byBS EN 115-1:2008+A1, 6.2.No YesLocation where the in

49、formation required byBS EN 115-1:2008+A1, 6.2 is keptNOTE 1 This address should preferably be in the UK.Does the moving walk display the safety signs in accordance withBS EN 115-1:2008+A1, 7.2.1.2.1 and Annex G?No YesDoes the moving walk display additional safety signs as permittedby local conditions in accordance withBS EN 115-1:2008+A1, 7.2.1.2.1?N/A YesIf yes, give description of sign(s)Confirm that safety barriers fo