1、BRITISH STANDARD BS 5667-1: 1979 ISO 1819:1977 Specification for Continuous mechanical handling equipment Safety requirements Part 1: General ISO title: Continuous mechanical handling equipment Safety code General rules UDC 621.867:614.8BS5667-1:1979 This British Standard, having been prepared under
2、 the directionof the Mechanical Engineering Standards Committee, was published underthe authority of the Executive Board on 31January1979 BSI 03-1999 The following BSI references relate to the work on this standard: Committee reference MEE/128 Draft for comment 76/72197 DC ISBN 0 580 10497 4 Coopera
3、ting organizations The Mechanical Engineering Standards Committee, under whose direction this British Standard was prepared, consists of representatives from the following Government departments and scientific and industrial organizations: The organizations marked with an asterisk in the above list,
4、 together with the following, were directly represented on the committee entrusted with the preparation of this British Standard: Associated Offices Technical Committee* Department of the Environment Association of Consulting Engineers* Department of Trade (Marine Division) Association of Hydraulic
5、Equipment Engineering Equipment Users Association* Manufacturers Federation of Manufacturers of Construction Association of Mining, Electrical and Equipment and Cranes Mechanical Engineers Health and Safety Executive* British Compressed Air Society Institution of Gas Engineers British Electrical and
6、 Allied Manufacturers Institution of Mechanical Engineers Association (BEAMA) Institution of Plant Engineers British Gas Corporation Institution of Production Engineers* British Gear Manufacturers Association London Transport Executive British Internal Combustion Engine Machine Tool Trades Associati
7、on Manufacturers Association Ministry of Defence British Pump Manufacturers Association National Coal Board* British Steel Corporation Oil Companies Materials Association British Steel Industry Process Plant Association Chartered Institution of Building Services Railway Industry Association of Great
8、 Britain Crown Agents for Oversea Governments and Telecommunication, Engineering and Administrations Manufacturing Association (TEMA) Department of Industry (Mechanical The Society of Motor Manufacturers and Engineering) Traders Limited Department of Industry (National Engineering Water-tube Boilerm
9、akers Association Laboratory) Amalgamated Union of Engineering Workers Institution of Mining and Metallurgy British Quarrying and Slag Federation Institution of Mining Engineers British Rubber Manufacturers Association Mechanical Handling Engineers Association Chain Testers Association of Great Brit
10、ain Metal Packaging Manufacturers Association Coke Oven Managers Association Sand and Gravel Association Limited Electrical, Electronic, Telecommunications Society of Dairy Technology and Plumbing Union Electricity Supply Industry in England and Wales Amendments issued since publication Amd. No. Dat
11、e of issue CommentsBS5667-1:1979 BSI 03-1999 i Contents Page Cooperating organizations Inside front cover National foreword ii 0 Introduction 1 1 General 1 1.1 Scope 1 1.2 Field of application 1 1.3 Definitions 1 1.4 General plan 1 2 General rules 1 2.1 In the construction stage (design and manufact
12、ure) 2 2.2 During the installation stage (layout, erection and entry into service) 3 2.3 During the utilization stage (operation and maintenance) 4 Appendix Z (updated February 1977) List of safety regulations 6 Publications referred to Inside back coverBS5667-1:1979 ii BSI 03-1999 National foreword
13、 This British Standard has been prepared under the direction of the Mechanical Engineering Standards Committee. This Part is identical with ISO1819 “Continuous mechanical handling equipment Safety code General notes”, developed by Technical Committee ISO/TC 101, Continuous mechanical handling equipm
14、ent, and lays down rules for the safety of personnel in the use of continuous mechanical handling equipment under normal working conditions when carrying loose bulk materials on unit loads. It is important that both manufacturers and users of such equipment are aware of the latest safety regulations
15、. Attention is therefore drawn toAppendix Z of this standard. This standard forms part of a series concerned with continuous mechanical handling. The other Parts which also implement ISO publications relate to special safety rules. This standard is complementary to the other British Standards dealin
16、g with conveyors, i.e. BS2567, BS2890, BS4409 and BS4531. It does not in anyway supersede them. Terminology and conventions. The text of the international standard has been approved as suitable for publication, without deviation, as a BritishStandard. Some terminology and certain conventions are not
17、 identical with those used in British Standards; attention is especially drawn to the following. The comma has been used throughout as a decimal marker. In British Standards it is current practice to use a full point on the baseline as the decimal marker. Wherever the words “International Standard”
18、appear, referring to this standard, they should be interpreted as “British Standard”. Cross-references. The references to ISO/TR5045, ISO/TR5046 and ISO/TR5047 constitute informative matter only. ISO/TR5046 has been implemented as Part18 in this series. Technically equivalent British Standards will
19、also be produced for ISO/TR5045 and ISO/TR5047. Since no mandatory requirements are involved, the validity of this British Standard is not affected. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct
20、 application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, pages i and ii, pages1 to 10, an inside back cover and a back cover. This standard has been updated (see copyrigh
21、t date) and may have had amendments incorporated. This will be indicated in the amendment table on theinside front cover.BS5667-1:1979 BSI 03-1999 1 0 Introduction It must be understood that the present International Standard applies only to conveying devices that have been correctly designed, and c
22、onstructed and erected with care. It must also be understood that the conveying device has been selected according to the characteristics of the product or the objects being conveyed, and is suitable for the working conditions. When the equipment conveys dangerous, noxious, toxic or harmful products
23、, the user shall inform the manufacturer and if necessary the erectors, and specify the special safety conditions to be complied with. 1 General 1.1 Scope This International Standard sets out safety rules relating to continuous mechanical handling equipment, including its construction, installation,
24、 utilization and maintenance, to ensure that it is used to the best advantage, and to prevent, as far as possible, any accidents or mishaps that could arise from misuse. To this end, these rules provide precise directives necessary to comply with legal texts (seeAppendix Z) and requirements decreed
25、by governing bodies in certain countries. 1.2 Field of application The safety rules laid down in this InternationalStandard apply in the normal working conditions defined in1.3.1, regardless of the use for which the equipment is intended. These safety rules limit the suppliers responsibility to cont
26、inuous mechanical handling equipment proper, excluding the structures (building frameworks, planks, etc.) to which such equipment is affixed or on which it is placed and for which the user is responsible, except when such structures have been designed, supplied and erected by the conveying device ma
27、nufacturer. The sole object of these rules is the safety of the personnel defined in1.3.2. Skilled personnel fitters, maintenance and repair personnel, who only work from time to time at the request of the person responsible for the plant shall observe special rules, particularly those set out in2.3
28、.17 to2.3.21. Persons whose duties do not demand their presence on the plant or in the vicinity of the equipment under consideration shall observe orders forbidding access to certain areas. 1.3 Definitions 1.3.1 normal working conditions specified conditions as agreed by the interested parties for t
29、he use of continuous mechanical handling equipment these normal working conditions will either be defined by the user and agreed with the manufacturer at the time of passing the order, or defined for standard equipment in the manufacturers catalogue when it is issued 1.3.2 personnel persons essentia
30、l to the use (the operation) of the continuous mechanical handling equipment itself and persons legitimately in the vicinity 1.4 General plan The safety code is divided into two parts: a) General rules relating to all continuous mechanical handling equipment for loose bulk materials or unit loads (c
31、overed by this International Standard). b) Special rules for continuous mechanical handling equipment for loose bulk materials or unit loads. These rules, written for individual appliances or groups of appliances, are covered by separate International Standards. Each part of the safety code is divid
32、ed into three clauses dealing with the safety rules applying to the following stages: construction (design and manufacture); installation (layout, erection and entry into service); utilization (operation and maintenance). 2 General rules The construction and operation of all continuous mechanical ha
33、ndling equipment for loose bulk materials and unit loads shall meet the legal and local requirements relating to safety in general 1) ; the principles laid down in clause1 of this International Standard; the following general rules. 1) SeeAppendix Z.BS5667-1:1979 2 BSI 03-1999 2.1 In the constructio
34、n stage (design and manufacture) 2.1.1 The stability and strength of the equipment (static or mobile) shall be ensured under all normal working conditions, including climatic conditions as agreed by the contracting parties. 2.1.2 The whole conveyor path and especially the loading, unloading and tran
35、sfer points, must be designed so as to avoid as much as possible all spillage of products or conveyed material. 2.1.3 The slopes and the characteristics of the conveying element must be designed so as to avoid slipping and/or unintentional dropping of the conveyed products under normal working condi
36、tions. The support element of the material or load (belt, buckets, swing trays, etc.) must have sufficient size to be suitable for the transport of the specified product or load. 2.1.4 To prevent over-running or running backwards of the conveying device, all inclined or vertical appliances shall inc
37、lude a safety device which operates whenever the motive power is cut off or fails and where the load conveyed possesses kinetic or potential energy. Nevertheless, a safety device for this purpose is not compulsory for those special cases which are specified in the special International Standards for
38、 each type of appliance. 2.1.5 Certain fixed or mobile appliances may include an articulated or mobile part in a vertical plane, actuated by motor or manually; in this case, there shall be a compulsory safety device for immobilizing such an articulated part in the event of voluntary or accidental st
39、oppage of the motive power even if the latter is manual. The lowering and raising system shall be fitted with a safety device to prevent accidental lowering or lifting of the boom, and to prevent kickback of any manually operated crank. The device for lowering and raising the movable part shall be s
40、o located that there is no necessity for the operator to be under the conveyor. The movement must be limited at the extreme positions, by stops capable of supporting the stress due to the load. The exceptions to this rule are mentioned in the special International Standards. 2.1.6 In cases of manual
41、 loading and/or unloading, the characteristics of the unit (height, width, speed, etc.) must be suitable for the working stations. The special International Standards give the necessary particulars. Mechanical devices must be installed: a) for the loading and unloading of unit loads exceeding55kg; b
42、) for the loading of unit loads when the vertical speed exceeds0,5m/s; c) for the unloading of unit loads when the vertical speed exceeds0,25m/s. 2.1.7 The in-running nips and pinch points of the conveying device (belts, chains, belt pulleys, etc.) and the movable parts (chain sprockets, spur gears,
43、 couplings, etc.) shall be protected if they are normally accessible to personnel 2) . 2.1.8 When shearing and squeezing points or zones exist on the path of the conveying element (for example at a change of direction, or the close approach to fixed parts, etc.), guards shall be provided 2) . 2.1.9
44、All movable parts giving access through mechanical handling equipment shall be designed so that they cannot be opened whilst the apparatus is working and so that the appliance cannot be used or started while they are “open”. 2.1.10 The loading and unloading openings of the enclosed units (in casing
45、or in housing) must be made in such a way that they prevent access to the moving components; otherwise suitable protection shall be provided. 2.1.11 Openings in enclosed appliances, which give access to moving parts, shall be guarded by covers which require a hand tool for removal or are locked or a
46、re interlocked with the drive to the equipment. Covers which it is necessary to open while the appliance is in operation shall expose a suitable fixed grating, which will prevent access. 2.1.12 Access to inspection holes shall be easy. 2.1.13 All the frequently used lubrication points shall be acces
47、sible without it being necessary to remove the guards. 2.1.14 It is recommended that equipment be so designed that cleaning is facilitated. 2) See the following technical reports: ISO/TR 5045, Continuous mechanical handling equipment Safety code for belt conveyors Examples for guarding of nip points
48、. ISO/TR 5046, Continuous mechanical handling equipment Safety code for conveyors and elevators with chain-elements Examples for guarding of nip points. ISO/TR5047, Continuous mechanical handling equipment Safety code for chain conveyors with bearing devices or load carriers Examples of protection.
49、(In preparation.)BS5667-1:1979 BSI 03-1999 3 2.1.15 Equipment mounted on a moving frame, or any other additional equipment, such as the loading chute, feeders, etc., whether they are self-propelled or hand-operated, shall be provided with a device enabling them to be immobilized. Safety devices shall be provided to limit the travel of such equipment. 2.1.16 Wheels or rollers of travelling conveyors and of additional travelling equipment shall be guarded at points accessible to personnel under normal working conditions. 2.1.17
copyright@ 2008-2019 麦多课文库（www.mydoc123.com）网站版权所有
备案/许可证编号：苏ICP备17064731号-1