BS 5815-1-2005 Sheets sheeting pillowslips towels napkins counterpanes and continental quilt secondary covers suitable for use in the public sector - Specification for sheeting she.pdf

1、BRITISH STANDARD BS 5815-1:2005 Sheets, sheeting, pillowslips, towels, napkins, counterpanes and continental quilt secondary covers suitable for use in the public sector Part 1: Specification for sheeting, sheets and pillowslips ICS 97.160 BS 5815-1:2005 This British Standard was published under the

2、 authority of the Standards Policy and Strategy Committee and comes into effect on 1 July 2005 BSI 20 June 2005 First published as BS 5815, December 1979 Revised as BS 5815-1, January 1989 and July 2005 The following BSI references relate to the work on this British Standard: Committee reference TCI

3、/66/1 Draft for comment 02/123368 DC ISBN 0 580 46196 3 Committees responsible for this British Standard The preparation of this British Standard was entrusted by Technical Committee TCI/66, Apparel and indoor textiles, to subcommittee TCI/66/1, Sheets, towels and blankets, upon which the following

4、bodies were represented: British Interior Textiles Association Confederation of British Wool Textiles Ltd. National Bed Federation Ltd. Performance Textiles Association Ltd. SATRA Technology Centre Society of Dyers and Colourists Textile Services Association Ltd. Co-opted members Amendments issued s

5、ince publication Amd. No. Date Text affectedBS 5815-1:2005 BSI 20 June 2005 i Contents Page Committees responsible Inside front cover Foreword ii 1S c o p e 1 2 Normative references 1 3F a b r i c 2 4 Sheets 3 5 Pillowslips 4 6 Particular requirements for sheets and pillowslips for rail transport 5

6、Annex A (informative) Information to be supplied by the purchaser 5 Table 1 Fabric references with weave and dimension options 2 Table 2 Constructional requirements for fabrics 2 Table 3 Performance requirements for fabrics 3 Table 4 Colour fastness requirements for non-flame-retardant fabrics 3 Tab

7、le 5 Dimensions of sheets and drawsheets 4 Table 6 Dimensions of pillowslips 5BS 5815-1:2005 ii BSI 20 June 2005 Foreword This British Standard has been prepared by Technical Committee TCI/66/1, Sheets, towels and blankets. It supersedes BS 5815-1:1989, which is withdrawn. Under the generic title Sh

8、eets, sheeting, pillowslips, towels, napkins, counterpanes and continental quilt secondary covers suitable for use in the public sector, BS 5815 is published in three parts as follows: Part 1: Specification for sheeting, sheets and pillowslips Part 2: Specification for towels and napkins Part 3: Spe

9、cification for counterpanes and continental quilt secondary covers including flammability performance The format used is that the standard first defines the fabrics and then the articles made from each fabric. For clarity and ease of communication, each fabric has a reference comprising two letters,

10、 followed by a number to indicate the width option. This standard covers only the basic description of the products and their construction and performance requirements. Purchasing authorities therefore may need to specify additional information. This Part covers sheeting, sheets and pillowslips but

11、can also be used to specify the fabrics from which they are manufactured. Many properties cannot be specified objectively and are therefore not included in this standard, e.g. colour, handling qualities and details of additional design features. Public sector purchasing authorities may be able to su

12、pply standard patterns that cover these properties and serve to resolve any ambiguities of description. This Part of BS 5815 does not include a requirement for electrostatic properties. Some of the articles therefore may not be suitable for use in some locations in healthcare premises. Attention is

13、drawn to Department of Health requirements precluding the use of static-prone textiles in operating theatres. Equally the standard does not cover requirements for physiological comfort and again there may be some medical situations where not all of the products are equally suitable. Compliance with

14、a British Standard does not of itself confer immunity from legal obligations Summary of pages This document comprises a front cover, an inside front cover, pages i to ii, pages 1 to 5 and a back cover. The BSI copyright notice displayed in this document indicates when the document was last issued.BS

15、 5815-1:2005 BSI 20 June 2005 1 1 Scope This Part of BS 5815 specifies requirements for the materials, manufacture, make-up and testing of sheeting, sheets and pillowslips for use in the public sector. The dimensions of these articles are also specified. Particular requirements for sheets and pillow

16、slips for rail transport are included in Clause 6 of this standard. Information to be supplied by the purchaser is given in Annex A. NOTE The standard does not apply to resinated sheets. 2 Normative references The following referenced documents are indispensable for the application of this document.

17、 For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. BS 2471, Methods of test for textiles Woven fabrics Determination of mass per unit length and mass per unit area BS 2610, Method of test fo

18、r the determination of the cuprammonium fluidity of cotton and certain cellulosic man-made fibres BS 3870-1, Stitches and seams Part 1: Classification and terminology of stitch types BS 3870-2, Stitches and seams Part 2: Classification and terminology of seam types BS 4032, Method of test for the de

19、termination of certain water- or alkali-soluble additives in cellulosic or synthetic fibres, yarns and fabrics or yarns and fabrics made from blends of such fibres BS 4407, Methods for quantitative analysis of fibre mixtures BS 4560:1990, Specification for fabrics for linings in uniform clothing BS

20、EN 1049-2, Textiles Woven fabrics Construction Methods of analysis Part 2: Determination of the number of threads per unit length BS EN 1773:1997, Textiles Fabrics Determination of width and length BS EN 12590:2000, Textiles Industrial sewing threads made wholly or partly from synthetic fibres BS EN

21、 ISO 6330, Textiles Domestic washing and drying procedures for textile testing BS EN ISO 13934-1, Textiles Tensile properties of fabrics Part 1: Determination of maximum force and elongation at maximum force using three strip method BS EN 25077, Textiles Determination of dimensional change in washin

22、g and drying BS EN ISO 105-B02, Textiles Tests for colour fastness Colour fastness to artificial light Xenon arc fading lamp test BS EN ISO 105-B05, Textiles Tests for colour fastness Detection and assessment of photochromism BS EN ISO 105-C06:1997, Textiles Tests for colour fastness Colour fastness

23、 to domestic and commercial laundering BS EN ISO 105-E04, Textiles Tests for colour fastness Colour fastness to perspiration BS EN ISO 105-N02, Textiles Tests for colour fastness Colour fastness to bleaching: peroxide BS EN ISO 105-X12, Textiles Tests for colour fastness Colour fastness to rubbing B

24、S EN ISO 12945-1, Textiles Determination of fabric propensity to surface fuzzing and to pilling. Pilling box method BS 5815-1:2005 2 BSI 20 June 2005 3 Fabric 3.1 Fabric construction Fabric shall be manufactured in accordance with the relevant requirements set out in Table 1 and Table 2 (see 6.2 for

25、 modifications in the case of sheets and pillowslips for rail transport). NOTE Fibre blends should be intimately mixed, yarns evenly spun and fabrics uniformly woven. Selvedges should be firm and straight. 3.2 Fabric properties The fabric shall conform to the relevant requirements of Table 2, Table

26、3 and Table 4 (see 6.2 for modifications in the case of sheets and pillowslips for rail transport). NOTE The fabric references use letters to describe fabric type, and numbers to describe fabric width. Table 1 Fabric references with weave and dimension options Table 2 Constructional requirements for

27、 fabrics Reference Description Weave Minimum width cm ST1 ST2 ST3 ST4 ST5 Fabric for sheets and pillowslips Plain 230 200 180 175 150 SW1 a Fabric for drawsheets 2 2 twill Method of test: BS EN 1773, 8.3 a Loomstate fabric, previously ST6 for 100 % cotton fabric Fabric description Fibre content Weav

28、e Threads per centimetre, min. Mass/unit area, min. Filling max. Warp Weft % g/m 2 % ST Cotton 100 cotton Plain 24 22 185 2 Polyester/cotton 50 polyester 50 cotton Plain 28 25 145 2 Polyester 100 polyester Plain 28 25 145 Nil SW Cotton 100 cotton 2 2 twill 17 22 270 5 Polyester 100 polyester 2 2 twi

29、ll 21 17 270 Nil Method of test: BS 4407 BS EN 1049-2 BS 2471 BS 4032BS 5815-1:2005 BSI 20 June 2005 3 Table 3 Performance requirements for fabrics Table 4 Colour fastness requirements for non-flame-retardant fabrics 4 Sheets 4.1 Fabric Sheets shall be made from fabric ST as specified in Clause 3. D

30、rawsheets shall be made from fabric SW as specified in Clause 3. 4.2 Sewing thread The sewing thread shall be polyester and cotton core spun with continuous filament polyester core and cotton sheath, ticket numbers 75, 100 or 120 conforming to BS EN 12590:2000, Table 5. NOTE The ticket number used d

31、epends upon the mass per unit area of the fabric. The thread shall be of the same colour as the sheet and, in the case of coloured sheets, of the same colour fastness. 4.3 End hems Sheets shall have 2 cm end hems of hem type 6-03-01 as described in BS 3870-2. A minimum of 0.5 cm of the raw edge shal

32、l be turned in. Fabric description Breaking strength, min. Resistance to pilling a , min. Dimensional change on washing, max. Heat shrinkage, max. Cuprammonium fluidity, max. Warp Weft Warp Weft Warp Weft N N Grade % % % % Units ST Cotton 465 510 7.5 6 6 Polyester/cotton 650 600 4 5 5 2 2 Polyester

33、1000 700 4 2 2 2 2 SW Cotton 310 845 Polyester 800 1200 4 2 2 Method of test: BS EN 13934-1 BS EN ISO 12945-1 BS EN 25077 b BS 4560:1990, Appendix B c BS 2610 a i.e. tested on fabric in “as received” state (i.e. not washed). b After washing in accordance with procedure 1A of BS EN ISO 6330 except at

34、 a temperature of 71 C and drying in accordance with procedure D. c Except that a test temperature of (185 4) C is required. Agency Minimum rating Method of test Light 5 BS EN ISO 105 B02 Photochromism P6 (P34) BS EN ISO 105 B05 Rubbing: dry wet 4 34 BS EN ISO 105 X12 Bleaching: peroxide 4 BS EN ISO

35、 105 N02 Perspiration, acid and alkaline: colour change staining cotton staining polyester 4 4 4 BS EN ISO 105 E04 Washing: colour change staining cotton staining polyester 4 4 4 BS EN ISO 105 C06, test E2SBS 5815-1:2005 4 BSI 20 June 2005 4.4 Side edges Side edges for SD1 shall be selvedges. For ot

36、her sheets, side edges shall be either selvedges or hems. Hems on side edges shall be hem type 6-03-01 as described in BS 3870-2 and of minimum width 0.6 cm. 4.5 Sewing For hems, stitch type 301 as described in BS 3870-1 shall be used and there shall be not less than four stitches per centimetre. NO

37、TE The sewing should be of even tension throughout and the ends should be finished securely and neatly. 4.6 Dimensions The finished dimensions shall be as specified in Table 5 when determined by the methods described in BS EN 1773. Table 5 Dimensions of sheets and drawsheets 5 Pillowslips 5.1 Fabric

38、 Pillowslips shall be made from fabric ST conforming to Clause 3. 5.2 Sewing thread The sewing thread shall be polyester and cotton core spun with continuous filament polyester core and cotton sheath, ticket numbers 75, 100 or 120, conforming to BS EN 12590:2000, Table 5. NOTE The ticket number used

39、 depends upon the mass per unit area of the fabric. The thread shall be of the same colour as the pillowslip and, in the case of coloured pillowslips, of the same colour fastness. 5.3 Pattern The pillowslips shall be made to the housewife pattern, i.e. in which the open end of the pillowslip is prov

40、ided with a flap which is folded and sewn inside the pillowslip to form an internal pocket which retains the pillow and effects a closure. The flap shall be at least 20 cm deep and there shall be selvedges at both the end of the flap and at the opening. 5.4 Sewing The long side seams shall be joined

41、 using seam type 1-01-03, as described in BS 3870-2, the flap edges being sewn to the seam such that, when finished, the flap edge is enclosed between the long side seams. The side seams shall be sewn using stitch type 401, as described in BS 3870-1, at 1 cm from the edge and type 503, as described

42、in BS 3870-1, at 0.5 cm from the edge. No cut edges shall be exposed. There shall be not less than four stitches per centimetre. NOTE The sewing should be of even tension throughout and should be finished securely and neatly. Reference Cotton and polyester/cotton Polyester Width, min. Length, min. W

43、idth, min. Length, min. cm cm cm cm Sheet SH1 SH3 SH5 SH6 SH8 SH9 SH10 230 180 150 150 135 10065 275 275 255 215 185 17590 230 180 150 150 135 10065 260 260 255 215 185 17590 Drawsheet SD 1 115 186 115 186BS 5815-1:2005 BSI 20 June 2005 5 5.5 Dimensions The dimensions shall be as specified in Table

44、6 when determined by the methods of test described in BS EN 1773. Table 6 Dimensions of pillowslips 6 Particular requirements for sheets and pillowslips for rail transport NOTE Sheets and pillowslips purchased for use in sleeper trains differ somewhat from the articles described elsewhere in this st

45、andard because of a decision to use 100 % flame-retardant cotton. To provide acceptable handling qualities and laundry processing performance after such treatment, it is necessary to reduce the construction and physical performance specifications. This leads to a reduced though still acceptable use-

46、life with good flame retardancy and acceptable handling qualities. 6.1 General In addition to the other requirements of this Part of BS 5815, sheets and pillowslips for use in rail transport shall conform to 6.2 and 6.3. 6.2 Construction and performance The finished, flame-retardant treated fabric s

47、hall conform to the requirements for ST cotton fabric as given in Table 2 and Table 3, except for the following modifications: 6.3 Finished dimensions The finished dimensions of the sheets shall conform to the requirements for SH5 as specified in Table 5. Annex A (informative) Information to be supp

48、lied by the purchaser The following information should be supplied by the purchaser: a) article type, fibre content, dimensions and reference; b) colour and any special finishing requirements; c) details of any marking or additional design elements; d) packaging instructions; e) instructions for sam

49、pling, testing and inspection; f) details of any additional requirements. NOTE Purchasers in some cases will need to specify additional requirements (see Foreword). Reference Width, min. Length, min. cm cm Pillowslip PS1 PS2 PS3 45 50 55 76 76 76 mass per unit area, min. (g/m 2 ) 160 breaking strength, min.:warp (N) 415weft (N) 430 cuprammonium fl