BS 5920-1980 Method for determination of dimensions of textile floor covering test specimens《铺地织物试样尺寸的测定方法》.pdf

1、BRITISH STANDARD BS5920:1980 Method for Determination of dimensions of textile floor covering test specimens UDC:677.07:645.12:677.017.22:620.115.8BS5920:1980 This British Standard, having been prepared under the directionof the Fibres, Yarns andFabrics Standards Committee, was published underthe au

2、thority of the Executive Board and comes intoeffect on 31July1980 BSI11-1999 The following BSI references relate to the work on this standard: Committee reference FBT/16 Draft for comment78/35754 DC ISBN 0 580 11475 9 Cooperating organizations The Fibres, Yarns and Fabrics Standards Committee, under

3、 whose direction this British Standard was prepared, consists of representatives from the following Government departments and scientific and industrial organizations: Association of Jute Spinners and Manufacturers British Man-made Fibres Federation* British Nonwovens Manufacturers Association Briti

4、sh Railways Board* British Textile Employers Association* Central Council of the Irish Linen Industry Consumer Standards Advisory Committee of BSI Department of Industry (Chemicals and Textiles) International Wool Secretariat* Knitting Industries Federation Ltd.* Manchester Chamber of Commerce and I

5、ndustry* Ministry of Defence* Narrow Fabrics Federation Retail Trading-Standards Association Inc.* Textile Institute* Wrap Knitters Association Ltd. The organizations marked with an asterisk in the above list, together with the following, were directly represented on the committees entrusted with th

6、e preparation of this British Standard: Agrment Board Bradford Conditioning House British Carpet Manufacturers Association British Polyolefin Textiles Association Department of the Environment (PSA) European Flooring Institute Fibre Bonded Carpet Manufacturers Association Quality Control Services Lt

7、d. Soap and Detergent Industry Association Society of Dyers and Colourists Society of Motor Manufacturers and Traders Limited Textile Research Council Wool Textile Delegation Amendments issued since publication Amd. No. Date of issue CommentsBS5920:1980 BSI 11-1999 i Contents Page Cooperating organi

8、zations Inside front cover Foreword ii 1 Scope 1 2 References 1 3 Principle 1 4 Apparatus 1 5 Atmosphere for conditioning and testing 1 6 Test specimens 1 7 Procedure 1 8 Test report 3 Figure 1 Apparatus, top view, shown without top plate 2 Figure 2 Apparatus, side view, shown with top plate in posi

9、tion 2 Figure 3 Marking of specimens 2 Publications referred to Inside back coverBS5920:1980 ii BSI 11-1999 Foreword This British Standard has been prepared under the direction of the Fibres, Yarns and Fabrics Standards Committee. The test method has been developed to fulfil the need for an accurate

10、 means of determining the dimensions of textile floor coverings using apparatus that is appropriate for use with test specimens or tiles. The dimensions of the principal items of apparatus are not, therefore, provided in view of the diversity of specimen sizes. A British Standard does not purport to

11、 include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover,

12、pagesi andii, pages1 to4, an inside back cover and a back cover. This standard has been updated (see copyright date) and may have had amendments incorporated. This will be indicated in the amendment table on the inside front cover.BS5920:1980 BSI 11-1999 1 1 Scope This British Standard specifies a m

13、ethod for the determination of dimensions of textile floor covering test specimens for use in the dimensional stability test methods described in BS4682. It is applicable to textile floor coverings of all types, with maximum thickness15mm. NOTEThickness dimensions may be determined by the method des

14、cribed in BS4051. 2 References The titles of the publications referred to in this standard are listed on the inside back cover. 3 Principle Dimensions along and across test specimens are measured using micrometer gauges. 4 Apparatus NOTEThis apparatus is suitable also for use in the methods for dete

15、rmination of dimensions of tiles described in BS5921. The following apparatus is required. 4.1 A rigid, durable, smooth and waterproof baseboard, e.g.of metal or marine plywood coated with a plastics laminate, of a size suitable to accommodate the test specimen. Two stop bars, approximately25mm wide

16、 and15mm high, are fitted at right angles along two adjacent sides with a gap of approximately1mm at the corner. On each of the two opposite sides, two cut-outs or slots are made approximately20mm wide and at least20mm long, to accommodate the presser feet of the dial gauge micrometers. The slots ar

17、e positioned at % and b) the individual values, for each specimen, of the dimensions in the direction of manufacture and in the direction at right angles to the direction of manufacture to the nearest0.1mm; c) details of any deviations from the standard test procedure.4 blankBS5920:1980 BSI 11-1999

18、Publications referred to BS1051, Glossary of terms relating to the conditioning and testing of textiles. BS4051, Method for determination of thickness of textile floor coverings. BS4664, Methods of sampling and cutting specimens for physical tests on textile floor coverings. BS4682, Methods of test

19、for the dimensional stability of textile floor coverings. BS5921, Methods for determination of size, squareness and straightness of edge of textile floor covering tiles. BS5920:1980 BSI 389 Chiswick High Road London W4 4AL BSIBritishStandardsInstitution BSI is the independent national body responsib

20、le for preparing BritishStandards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter. Revisions BritishStandards are updated by amendment or revision. Users of BritishStandards should make sure that they possess the latest amendments o

21、r editions. It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this BritishStandard would inform the Secretary of the technical committee responsible, the identity of which can be found on t

22、he inside front cover. Tel:02089969000. Fax:02089967400. BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards. Buying standards Orders for all BSI, international and foreign standards publications should b

23、e addressed to Customer Services. Tel:02089969001. Fax:02089967001. In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as BritishStandards, unless otherwise requested. Information on standards BSI provides a wide ran

24、ge of information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give details on all its products and services. Contact the Information Centre. Tel:02089967111. Fa

25、x:02089967048. Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of these and other benefits contact Membership Administration. Tel:02089967002. Fax:02089967001. Copyright Copyright subsists in

26、 all BSI publications. BSI also holds the copyright, in the UK, of the publications of the international standardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means

27、 electronic, photocopying, recording or otherwise without prior written permission from BSI. This does not preclude the free use, in the course of implementing the standard, of necessary details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. If permission is granted, the terms may include royalty payments or a licensing agreement. Details and advice can be obtained from the Copyright Manager. Tel:02089967070.