BS 5L 34-1985 Specification for forging stock bars extruded sections and forgings of 99% aluminium《99%铝锻坯、棒材、挤压型材和锻件规范》.pdf

1、BRITISH STANDARD AEROSPACE SERIES BS5L34:1985 (Superseding BS4L34) Specification for Forging stock, bars, extruded sections and forgings of99% aluminium UDC 629.7:669.71-126+669.71-134+669.71-412BS5L34:1985 This BritishStandard, having been prepared under the directionof the Aerospace Standards Comm

2、ittee, was published under the authority ofthe Board of BSI and comesintoeffect on 31December1985 BSI02-2000 The following BSI references relate to the work on this standard: Committee reference ACE/24 Draft for comment81/77624 DC ISBN 0 580 14825 4 Committees responsible for this BritishStandard Th

3、e preparation of this BritishStandard was entrusted by the Aerospace Standards Committee (ACE/-) to Technical Committee ACE/24 upon which the following bodies were represented: Aluminium Federation Aluminium Stockholders Association Association of Light Alloy Refiners Limited BNF Metals Technology C

4、entre British Forging Industry Association British Industrial Fasteners Federation British Investment Casting Trade Association Institute of British Foundrymen Light Metal Founders Association Magnesium Industry Council Ministry of Defence Society of British Aerospace Companies Limited Amendments is

5、sued since publication Amd. No. Date of issue CommentsBS5L34:1985 BSI 02-2000 i Contents Page Committees responsible Inside front cover 1 Inspection and testing procedure 1 2 Quality of material 1 3 Chemical composition 1 4 Condition 1 5 Heat treatment 1 6 Mechanical properties 1 Publication referre

6、d to Inside back coverBS5L34:1985 ii BSI 02-2000 NOTE 1Other forms of material of the same composition are covered by the following BritishStandards: BS L16, Sheet and strip (Temper designation H14 or H24). BS L17, Sheet and strip (Temper designation0). BS L54, Tube (Cold drawn: seamless: tested hyd

7、raulically). BS L116, Tube (Cold drawn: seamless: not tested hydraulically). NOTE 2The chemical composition of this material complies with that registered as International Designation1200. NOTE 3The title of the publication referred to in this standard is listed on the inside back cover. A British S

8、tandard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cov

9、er, an inside front cover, pagesi andii, pages1 and 2, an inside back cover and a back cover. This standard has been updated (see copyright date) and may have had amendments incorporated. This will be indicated in the amendment table on the inside front cover.BS5L34:1985 BSI 02-2000 1 1 Inspection a

10、nd testing procedure This BritishStandard shall be used in conjunction with the relevant sections of the latest issue of BSL100. 2 Quality of material The material shall be made from aluminium of the chemical composition specified in clause3, with or without approved scrap at the discretion of the m

11、anufacturer. 3 Chemical composition The chemical composition of the material shall be: 4 Condition 4.1 Forging stock. Cast billets and slabs for hot working and extruded bars, sections and hot-rolled plate for forging shall be supplied non-heat-treated. 4.2 Bars and extruded sections. Bars for machi

12、ning and extruded sections shall be supplied in one of the following conditions: 1) extruded or 2) extruded and drawn or 3) rolled and drawn and subsequently straightened. NOTEThe material may be annealed before or after straightening. 4.3 Forgings. Unless otherwise agreed in accordance with BS L100

13、, forgings shall be supplied as forged or annealed. 5 Heat treatment None. 6 Mechanical properties 6.1 Tensile test. Unless they are required by BSL100 to be fixed by agreement between the manufacturer and the purchaser, the mechanical properties obtained from test pieces selected and prepared in ac

14、cordance with the relevant requirements of BS L100 shall be not less than the following values: Element % min. max. Silicon plus iron Copper Manganese Zinc Titanium Others: each Others: total Aluminium a 99.00 1.00 0.05 0.05 0.10 0.05 0.05 0.15 a The aluminium content is the difference between100.00

15、% and the sum of all the other metallic elements present in amounts of0.01% or more each, expressed to the second decimal place before determining the sum. Tensile strength Elongation on gauge length of 50mm 5.65 S u MPa % % 65 18 202 blankBS5L34:1985 BSI 02-2000 Publication referred to BS L100, Pro

16、cedure for inspection and testing of wrought aluminium and aluminium alloys. BS5L34:1985 BSI 389 Chiswick High Road London W4 4AL BSIBritishStandardsInstitution BSI is the independent national body responsible for preparing BritishStandards. It presents the UK view on standards in Europe and at the

17、international level. It is incorporated by Royal Charter. Revisions BritishStandards are updated by amendment or revision. Users of BritishStandards should make sure that they possess the latest amendments or editions. It is the constant aim of BSI to improve the quality of our products and services

18、. We would be grateful if anyone finding an inaccuracy or ambiguity while using this BritishStandard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel:02089969000. Fax:02089967400. BSI offers members an individual upd

19、ating service called PLUS which ensures that subscribers automatically receive the latest editions of standards. Buying standards Orders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel:02089969001. Fax:02089967001. In response to orders for

20、 international standards, it is BSI policy to supply the BSI implementation of those that have been published as BritishStandards, unless otherwise requested. Information on standards BSI provides a wide range of information on national, European and international standards through its Library and i

21、ts Technical Help to Exporters Service. Various BSI electronic information services are also available which give details on all its products and services. Contact the Information Centre. Tel:02089967111. Fax:02089967048. Subscribing members of BSI are kept up to date with standards developments and

22、 receive substantial discounts on the purchase price of standards. For details of these and other benefits contact Membership Administration. Tel:02089967002. Fax:02089967001. Copyright Copyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the in

23、ternational standardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI.

24、This does not preclude the free use, in the course of implementing the standard, of necessary details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. If permission is granted, the terms may include royalty payments or a licensing agreement. Details and advice can be obtained from the Copyright Manager. Tel:02089967070.