BS 6433-1983 Terminology and designation of the profile shape of woodworking saw teeth《木工锯齿剖面术语和名称》.pdf

1、BRITISH STANDARD BS 6433:1983 ISO 7294:1983 Terminology and designation of the profile shape of woodworking saw teeth ISO title: Saw teeth for woodworking saws Profile shape Terminology and designation UDC 621.93.024.1:674.053BS6433:1983 This British Standard, having been prepared under the directio

2、nof the Mechanical Engineering Standards Committee, was published underthe authority of the BoardofBSI and comes into effect on 30 December 1983 BSI 12-1999 The following BSI references relate to the work on this standard: Committee reference MEE/167 Draft for comment 82/74977 DC ISBN 0 580 13527 6

3、Committees responsible for this British Standard The preparation of this British Standard was entrusted by the Mechanical Engineering Standards Committee (MEE/-) to Technical Committee MEE/167 upon which the following bodies were represented: British Hacksaw and Bandsaw Manufacturers Association Bri

4、tish Woodworking Federation Department of the Environment (Building Research Establishment, Princes Risborough Laboratory) Gauge and Tool Makers Association National Sawmilling Association Amendments issued since publication Amd. No. Date of issue CommentsBS6433:1983 BSI 12-1999 i Contents Page Comm

5、ittees responsible Inside front cover National foreword ii 1 Scope and field of application 1 2 Reference 1 3 Terminology 2 4 Letter symbols for the profile of the tops of teeth 5 5 Letter symbols for the profile of the roots of teeth 6 6 Letter symbols for the teeth profile 7 Annex A Alphabetical l

6、ist of English terms and equivalent French terms 8 Publications referred to Inside back coverBS6433:1983 ii BSI 12-1999 National foreword This British Standard has been prepared under the direction of the Mechanical Engineering Standards Committee and is identical with ISO 7294 “Saw teeth for woodwo

7、rking saws Profile shape Terminology and designation” which was prepared by Technical Committee ISO/TC 29, Small tools, and published in 1983 by the International Organization for Standardization (ISO). For ease of production the French text in the main body of the InternationalStandard has been ret

8、ained but Annexe B (French terms) and Annex C (Italian terms) have been deleted as inappropriate in a British Standard. Terminology and conventions. The text of the International Standard has been approved as suitable for publication as a British Standard without deviation. Some terminology and cert

9、ain conventions are not identical with those used in British Standards; attention is drawn especially to the following. Where the words “International Standard” appear, referring to this standard, they should be read as “British Standard”. Cross-reference. The British Standard, BS 5533-1, identical

10、with ISO 3002-1, referred to in clause 2, has been withdrawn as obsolete. Since the ISO standard is referred to for information only, the validity of this standard is not affected. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards a

11、re responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, pages i and ii, pages 1 to 8, an inside back cover and a back cover. This standar

12、d has been updated (see copyright date) and may have had amendments incorporated. This will be indicated in the amendment table on the inside front cover.BS6433:1983 BSI 12-1999 1BS6433:1983 2 BSI 12-1999BS6433:1983 BSI 12-1999 3BS6433:1983 4 BSI 12-1999BS6433:1983 BSI 12-1999 5BS6433:1983 6 BSI 12-

13、1999BS6433:1983 BSI 12-1999 7BS6433:1983 8 BSI 12-1999BS6433:1983 BSI 12-1999 Publications referred to See national foreword.BS 6433:1983 ISO 7294:1983 BSI 389 Chiswick High Road London W4 4AL BSIBritishStandardsInstitution BSI is the independent national body responsible for preparing BritishStanda

14、rds. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter. Revisions BritishStandards are updated by amendment or revision. Users of BritishStandards should make sure that they possess the latest amendments or editions. It is the constant

15、 aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this BritishStandard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel:020

16、89969000. Fax:02089967400. BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards. Buying standards Orders for all BSI, international and foreign standards publications should be addressed to Customer Servic

17、es. Tel:02089969001. Fax:02089967001. In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as BritishStandards, unless otherwise requested. Information on standards BSI provides a wide range of information on national,

18、 European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give details on all its products and services. Contact the Information Centre. Tel:02089967111. Fax:02089967048. Subscribing mem

19、bers of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of these and other benefits contact Membership Administration. Tel:02089967002. Fax:02089967001. Copyright Copyright subsists in all BSI publications. BSI als

20、o holds the copyright, in the UK, of the publications of the international standardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, photocopying, rec

21、ording or otherwise without prior written permission from BSI. This does not preclude the free use, in the course of implementing the standard, of necessary details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. If permission is granted, the terms may include royalty payments or a licensing agreement. Details and advice can be obtained from the Copyright Manager. Tel:02089967070.