1、| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | BRITISH STANDARD BS 6571 : Part 6 : 1996 I
2、CS 93.080.30 NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW Vehicle parking control equipment Part 6. Specification for pay-on-foot parking control equipmentThis British Standard, having been prepared under the direction of the Sector Board for Building and Civil Engineering,
3、 was published under the authority of the Standards Board and comes into effect on 15 September 1996 BSI 1996 The following BSI references relate to the work on this standard: Committee reference B/509/20 Draft for comment 94/103509 DC ISBN 0 580 25741 X BS 6571 : Part 6 : 1996 Amendments issued sin
4、ce publication Amd. No. Date Text affected Committees responsible for this British Standard The preparation of this British Standard was entrusted by Technical Committee B/509, Road equipment, to Subcommittee B/509/20, Vehicle parking control equipment, upon which the following bodies were represent
5、ed: Association of Chief Police Officers of England and Wales Association of District Councils Association of London Authorities Association of Metropolitan Authorities British Parking Association Department of Transport (Highways Agency) Institution of Civil Engineers Institution of Highways and Tr
6、ansportation Parking Committee for London Royal Automobile Club Co-opted membersBS 6571 : Part 6 : 1996 BSI 1996 i Contents Page Committees responsible Inside front cover Foreword ii Specification 1 Scope 1 2 References 1 3 Definitions 1 4 General requirements 2 5 Electrical requirements 3 6 Operati
7、onal requirements 4 7 Coin/token box 5 8 Bank note box 5 9 Change giving unit 5 10 Displays 5 11 Ticket issue 6 12 Tickets 6 13 Information and instructions 6 14 Resistance to weathering 7 15 Type test 7 16 Marking 7 17 System integrity 7 Annex A (normative) Type test 8 List of references Inside bac
8、k coverii BSI 1996 BS 6571 : Part 6 : 1996 Foreword This Part of BS 6571 has been prepared by Subcommittee B/509/20. It is a new Part of BS 6571. Other Parts are as follows: Part 1 Specification for coin operated clockwork parking meters Part 2 Specification for electrically powered parking meters P
9、art 3 Specification for pay and display equipment Part 4 Specification for barrier type parking control equipment Part 5 Guide to the requirements for non-coin operated apparatus for use with parking control equipment Further Parts are under consideration, in particular: Part 7 Specification for par
10、king discs including orange badges Part 8 Specification for pre-purchased parking vouchers Part 9 Specification for in-car electronic devices Part 10 Code of practice for ancillary parking equipment and parking signs Whilst it is not within the scope of this standard, attention is drawn to the guida
11、nce of the Design Council on the aesthetic qualities of street furniture. Product Certification. Users of this British Standard are advised to consider the desirability of third party certification of product conformity with this British Standard based on testing and continuing product surveillance
12、which may be coupled with assessment of a suppliers quality systems against the appropriate Part of BS 5750. Enquiries as to the availability of third party certification schemes are forwarded by BSI to the Association of Certification Bodies. If a third party certification scheme does not already e
13、xist, users should consider approaching an appropriate body from the list of Association members. Compliance with a British Standard does not of itself confer immunity from legal obligations. BSI 1996 1 BS 6571 : Part 6 : 1996 Specification 1 Scope This Part of BS 6571 specifies requirements for equ
14、ipment for use with pay-on-foot parking control systems for off-street car parks in respect of the following items: a) an automatic payment station; b) a manned cashier payment station; c) a manned management payment station; d) a ticket reading mechanism to control entry/exit barriers. This equipme
15、nt would be installed to operate in conjunction with barriers, card acceptance units and ticket dispensing mechanisms. 2 References 2.1 Normative references This Part of BS 6571 incorporates, by dated or undated reference, provisions from other publications. These normative references are made at th
16、e appropriate places in the text and the cited publications are listed on the inside back cover. For dated references, only the edition cited applies; any subsequent amendments to or revisions of the cited publication apply to this Part of BS 6571 only when incorporated in the reference by amendment
17、 or revision. For undated references, the latest edition of the cited publication applies, together with any amendments. 2.2 Informative references This Part of BS 6751 refers to other publications that provide information or guidance. Editions of these publications current at the time of issue of t
18、his standard are listed on the inside back cover, but reference should be made to the latest editions. 3 Definitions For the purposes of this Part of BS 6571 the following definitions apply. 3.1 ticket dispenser Mechanism designed to mark and/or encode and issue a ticket for parking. It may incorpor
19、ate additional features, e.g. back-off ticket cancellation, invalidation, swallowing, multi or single slot device acceptance units, intercom. 3.2 automatic payment station Unit designed to accept, read and verify the information encoded on the ticket issued by a ticket dispenser, calculate the fee d
20、ue, accept valid payment and provide a ticket which will operate the exit barrier by either recoding the original ticket or issuing an alternative ticket. 3.3 manned cashier payment station Manned payment station which enables the customer to pay on foot the fee computed from the entry ticket with p
21、rocess facilities for ticket validation which provides a ticket which will operate the exit barrier by either recoding the original ticket or issuing an alternative ticket. 3.4 manned management station Facility for managing and operating a car park system and, where not otherwise provided, includin
22、g the facilities defined in 3.3. 3.5 ticket reading mechanism Device for reading a suitably encoded ticket from an automatic payment station or manned cashier payment station or ticket dispenser, and capable of transmitting a signal to operate the parking barrier. 3.6 ticket Paper, card or plastic d
23、ocument issued on entry to the car park, or by the automatic or manned payment stations, which carries encoded or machine-readable information. 3.7 accuracy of timing Period, in seconds, over a course of a month in respect of the real time control. 3.8 real time control Device to establish chronolog
24、ical time within the equipment for the purpose of parking fee calculations. 3.9 real time display Device for visibly displaying current time, in hours and minutes, from the real time control. 3.10 coin/token acceptance Function involving the correct operation of the equipment as a result of the inse
25、rtion of a valid coin or token. 3.11 bank note acceptance Function involving the correct operation of the equipment as a result of the insertion of a valid bank note. 3.12 device acceptance Function involving the correct operation of the equipment as a result of the correct use of a valid payment de
26、vice of a type or types agreed by the operator with the manufacturer. 3.13 valid coin Any coin accepted as legal tender of a denomination agreed by the operator with the manufacturer.2 BSI 1996 BS 6571 : Part 6 : 1996 3.14 valid bank note A bank note accepted as legal tender of a value agreed by the
27、 operator with the manufacturer. 3.15 valid token Medium of transaction agreed by the operator with the manufacturer with no official value recognized by the banking system but able to serve as payment for a transaction. 3.16 payment device Object other than a coin or a token able to complete a vali
28、d transaction and agreed by the operator with the manufacturer. NOTE. A payment device can be: a) a period authorization device, which will permit parking over a specified period; or b) a decrementing value payment device which will permit the purchase of a pre-defined value of parking or number of
29、operations; or c) a charge/credit card conforming to BS EN 27810, BS 7106, ISO/IEC 7812 and BS EN 27813 or those established for the purpose of parking payment by an operator or group of operators. 3.17 tariff Amount charged for a specific time period. 3.18 receipt Document issued on request, acknow
30、ledging fee paid. 3.19 change giving unit Mechanism that can give change or return the value of any aborted transaction either via a recycling unit, change hoppers or a combination of both. 3.20 coin/token box Secure device for the collection of coins/tokens used for payment. 3.21 bank note box Secu
31、re device for the collection of bank notes used for payment. 3.22 minimum audit facility Means of indicating the total value of coins or tokens deposited in the cash box and of notes deposited in the bank note box and the number and value of transactions made by each device. 4 General requirements 4
32、.1 The equipment shall be electrically operated from an external power source, although some functions may be supported and protected by an internal standby battery to deal with power failures. 4.2 The automatic pay station shall include the following features: a) coin/token acceptance unit; b) chan
33、ge giving facility; c) secure coin/token box; d) real time control; e) real time display; f) fee due display which may temporarily utilize the real time display in conjunction with other indicators; g) facility to allow the pay station to communicate with a central control, other pay stations and en
34、try or exit points either directly and/or via a central controller; h) system of voice communication so that the user may ask for assistance from the operator; i) facility to link to the real time central monitoring system; j) facility to provide an audit trail; k) facility to compute fees from enco
35、ded ticket data and current time given by the real time control; l) facility to enable the user to cancel the transaction at any stage prior to the issue of an exit ticket. NOTE. Additional features may be provided where required by the purchaser, or at the option of the manufacturer, such as: m) a
36、device acceptance unit; n) a bank note acceptance unit. The coin/token acceptance unit and/or the device acceptance unit shall be capable of recording each individual coin or token acceptance or correct use of a payment device during a transaction. All amounts so inserted or remaining to be paid sha
37、ll be displayed. A reject unit or other mechanism shall be fitted and shall have a coin return cup capable of holding a minimum of 10 of each coin that is accepted by the unit. 4.3 The manned cashier payment station shall include the following features: a) customer fee display; b) cashier unit; c) f
38、acility to provide an audit trail. NOTE. Additional features may be provided where required by the purchaser, or at the option of the manufacturer, such as a device acceptance unit. 4.4 The charge/credit card payment facility when fitted shall include the following features: a) charge/credit card ac
39、ceptance and validation facility; b) receipt printer. BSI 1996 3 BS 6571 : Part 6 : 1996 4.5 The equipment shall be arranged so that: a) all variable displays are mounted between 1.00 m and 1.40 m above surrounding ground level; b) all fixed information plates are located between 1.00 m and 1.80 m a
40、bove surrounding ground level; c) all coin/token or device acceptance external features and associated external controls are located between 1.0 m and 1.4 m above surrounding ground level; d) all ticket reader slots or ticket issue slots shall be positioned between 1.0 m and 1.4 m above surrounding
41、ground level; e) all push-buttons shall be positioned between 1.0 m and 1.4 m above surrounding ground level; f) any mounting plinth shall not protrude more than 200 mm beyond the front face of the pay station. 4.6 The exit ticket reader shall have the following features: a) ticket reader mechanism;
42、 b) collection container for used or cancelled tickets; c) warning indicator to show if ticket inserted is invalid; d) press for help push button operating an intercom for voice communication; e) ticket insertion instruction guide if four-way ticket reading is not available. NOTE. The ticket reader
43、may incorporate an intercom activated by the push button or a facility to accept a period authorization device (see 3.16). 4.7 The fastenings used for fixing the equipment to its mounting shall be accessible only from within a lockable housing. 4.8 External push buttons shall be not less than 20 mm
44、effective diameter. 4.9 The equipment and cash box housings shall be of sheet steel of welded construction with a minimum thickness of 2 mm or of material and construction of equivalent mechanical strength and security. 4.10 Locks for the coin and bank note boxes shall provide a system of security n
45、ot less than that obtained from a multi-tumbler type of lock. NOTE. The precise system of locking is not specified in this standard but should be agreed between the purchaser and the manufacturer. In this connection, attention is drawn to the possible use of selected key systems. The key(s) used to
46、gain access to the internal equipment shall not allow entry into the coin or bank note boxes without the use of a further key. 4.11 Windows shall be manufactured either from toughened safety glass conforming to BS 857 or from plastics safety glazing material conforming to categories C or G in clause
47、 4 of BS AU 182 : 1982. 4.12 The system shall be capable of issuing a receipt for a transaction. 4.13 Data in the audit facility shall only be recoverable by an authorized person using a key or a code. NOTE. In addition to the facilities provided by a minimum audit facility (see 3.22), facilities ma
48、y be provided to record: a) equipment down time; b) payments/device usage by tariff band; c) payments/device usage by time of day/day of week; d) accumulation of vehicles in the car park; e) operational matters (e.g. door opening, cash box/bank note box removals, emergency barrier openings); f) any
49、other matter required by the operator in agreement with the manufacturer. 5 Electrical requirements 5.1 External power source 5.1.1 Electrical supply shall be a single or three phase supply. NOTE. An additional operational standby system may be provided by agreement between the purchaser and the manufacturer. 5.1.2 All wiring shall be in accordance with BS 2754 and BS 7671. 5.1.3 Each piece of equipment shall be protected by a miniature circuit breaker or a residual current circuit device or by a labelled isolating switch to disconnect the power supply. 5.1.4 All items of metalw
copyright@ 2008-2019 麦多课文库（www.mydoc123.com）网站版权所有
备案/许可证编号：苏ICP备17064731号-1