BS 6607-4-1994 Tool shanks with 7 24 taper for automatic tool changers - Specification for functional dimensions of front faces of spindle holders for machine centres《带7 24锥形自动刀具变换.pdf

1、BRITISH STANDARD BS 6607-4: 1994 ISO 9524:1993 Tool shanks with 7/24 taper for automatic tool changers Part 4: Specification for functional dimensions of front faces of spindle holders for machine centres UDC 621.941-229BS6607-4:1994 This British Standard, having been prepared under the directionof

2、the Machine, Engineers and Hand Tools Standards Policy Committee, waspublished under the authorityof the Standards Boardand comes into effect on 15March1994 BSI 08-1999 The following BSI references relate to the work on this standard: Committee reference MTE/6 Draft for comment 90/78505 DC ISBN 0 58

3、0 22867 3 Committees responsible for this British Standard The preparation of this British Standard was entrusted by the Machine, Engineers and Hand Tools Standards Policy Committee (MTE/-) to Technical Committee MTE/6, upon which the following bodies were represented: British Engineers Cutting Tool

4、s Association Gauge and Tool Makers Association Coopted members Amendments issued since publication Amd. No. Date CommentsBS6607-4:1994 BSI 08-1999 i Contents Page Committees responsible Inside front cover National foreword ii 1 Scope 1 2 Normative references 1 3 Main accessories 1 4 Connector block

5、s 5 5 Mounting of accessories on the spindle holder 7 Annex A (informative) Bibliography Inside back cover Figure 1 2 Figure 2 3 Figure 3 4 Figure 4 5 Figure 5 6 Figure 6 7 Figure 7 8 Table 1 4BS6607-4:1994 ii BSI 08-1999 National foreword This Part of BS6607 has been prepared under the direction of

6、 the Machine, Engineers and Hand Tools Standards Policy Committee. It is identical with ISO9524:1993 Machine tools Front faces of spindle holders for machining centres Functional dimensions, published by the International Organization for Standardization (ISO). The Technical Committee has reviewed t

7、he provisions of ISO7388-1:1983 Add.1:1984, to which normative reference is made in the text, and has decided that they are acceptable for use in conjunction with this standard. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are

8、responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Cross-references International Standard Corresponding British Standard ISO 7-1:1982 BS 21:1985 Specification for pipe threads for tubes and fittings where pressure

9、-tight joints are made on the threads (Metric dimensions) (Technically equivalent) ISO 7388-1:1983 BS 6607 Tool shanks with 7/24 taper for automatic tool changers Part 1:1985 Specification for shank nos. 40, 45 and 50 (Identical) Summary of pages This document comprises a front cover, an inside fron

10、t cover, pages i and ii, pages1 to 8, an inside back cover and a back cover. This standard has been updated (see copyright date) and may have had amendments incorporated. This will be indicated in the amendment table on the inside front cover.BS6607-4:1994 BSI 08-1999 1 1 Scope This International St

11、andard specifies the functional connecting dimensions of the front faces of spindle holders for machining centres and of their various machining and measuring accessories to ensure that interchangeability, fixing by means of automatic tool changing devices and correct machine operation of these acce

12、ssories is possible. The main accessories are a) electrically operated accessories; b) coolant feed accessories, and c) mechanical indexing accessories, i.e. 1) angle heads, 2) drilling-tapping heads, 3) speed-increasing gears, etc. 2 Normative references The following standards contain provisions w

13、hich, through reference in this text, constitute provisions of this International Standard. At the time of publication, the editions indicated were valid. All standards are subject to revision, and parties to agreements based on this International Standard are encouraged to investigate the possibili

14、ty of applying the most recent editions of the standards indicated below. Members of IEC and ISO maintain registers of currently valid International Standards. ISO 7-1:1982, Pipe threads where pressure-tight joints are made on the threads Part 1: Designation, dimensions and tolerances. ISO 7388-1:19

15、83, Tool shanks with 7/24 taper for automatic tool changers Part 1: Shanks Nos. 40, 45 and50 Dimensions. ISO 7388-1:1983/Add.1:1984, Addendum 1: Conicity tolerances. 3 Main accessories 3.1 General To enable use of these accessories in automatic operating systems, they shall be mounted on shanks comp

16、lying with ISO7388-1 and ISO7388-1/Add.1. The indexing angle of the connecting arm of the accessory shall be adjustable. 3.2 Electrically operated accessories (seeFigure 1) When the accessory is located by means of an automatic changer, the transmitter arm projecting over the sensor is in line with

17、the receiver module. The receiver module is inserted in the connector block which is located on the spindle holder. The dimensions are given inTable 1. The functional connecting dimensions are the centre distance S and the distance C 1between the face of the transmitter module and the gauge plane of

18、 the shank. 3.3 Coolant feed accessories (seeFigure 2) When the accessory is located by means of an automatic changer, its end is inserted in the corresponding hole or slot in the connector block which is located on the spindle holder. The dimensions are given inFigure 2 andTable 1. The initial posi

19、tion of the end of the accessory shall not overlap the top face of the flange and the travel of the end shall be sufficient to ensure good connection with the receiver of the connector block. The functional connecting dimensions are the centre distance S, the distance C 2between the face of the end

20、and the end the gauge plane, and the diameter (18 mm) of the end. 0,032 0,050BS6607-4:1994 2 BSI 08-1999 Figure 1 BS6607-4:1994 BSI 08-1999 3 3.4 Mechanical indexing accessories (seeFigure 3) When the accessory is located by means of an automatic changer, its end is inserted in the corresponding hol

21、e or slot in the connector block which is located on the spindle holder. The dimensions are given inFigure 3 andTable 1. The functional connecting dimensions are the centre distance S defining the radial position of the connector block on the front face, the distance C 3between the face of the index

22、ing end and the gauge plane, and the width (18 mm) of the indexing end. Figure 2 0,032 0,050BS6607-4:1994 4 BSI 08-1999 3.5 Dimensions and tolerances SeeTable 1. Table 1 Figure 3 Dimensions in millimetres Shank No. D 2 D 3 m a S C 1 b C 2 C 3 F B c Type 1 Type 2 max. min. min. 40 100 170 16 65 35 45

23、 130 200 18 80 19 9 9 7 37 2 50 130 200 19 80 38 3 a This distance between the gauge plane of the spindle taper and the front face of the spindle holder is in accordance with that defined and specified in ISO9270. b C 1may vary depending on the type of electrical connection. c Thickness of the space

24、r (see4.1.3). 0,3 0,5 0 0,1BS6607-4:1994 BSI 08-1999 5 4 Connector blocks 4.1 Dimensions and tolerances A connector block comprises either the “receiver module” in the case of electrically operated accessories, or the hole or slot in the case of coolant feed accessories and mechanical indexing acces

25、sories. Connector blocks are fixed by means of two M8 screws and located by two pins of diameter6mm. 4.1.1 Connector block for electrically operated accessories (seeFigure 4) 4.1.2 Connector blocks for coolant feed accessories and mechanical indexing accessories seeFigure 5 a) and Figure 5 b) NOTE 1

26、The depth L is left to the manufacturers discretion. NOTE 2Dimensions marked with an asterisk are not functional, but if they are modified care should be taken to ensure interchangeability. Figure 4 BS6607-4:1994 6 BSI 08-1999 NOTE 1The shape and dimensions of the sealing ring are left to the manufa

27、cturers discretion. NOTE 2Dimensions marked with an asterisk are not functional, but if they are modified care should be taken to ensure interchangeability. Figure 5 BS6607-4:1994 BSI 08-1999 7 4.1.3 Spacer (seeFigure 6) NOTE 1A spacer is used only for shanks Nos.45 and50. 4.2 Material The connector

28、 block shall be made of type35CD4 steel treated to give a rupture strength of1400MPa, or any material having equivalent properties. 5 Mounting of accessories on the spindle holder seeFigure 7 a) and Figure 7 b) The clamping angle of the various accessories shall be adjustable. It is adjusted on each

29、 tool once only as a function of the configuration of the front face of the spindle holder of the machine and the restrictions imposed by the automatic tool changer. NOTE 1Dimension B is given inTable 1. NOTE 2Dimensions marked with an asterisk are not functional, but if they are modified care shoul

30、d be taken to ensure interchangeability. Figure 6 BS6607-4:1994 8 BSI 08-1999 Figure 7 BS6607-4:1994 BSI 08-1999 Annex A (informative) Bibliography 1 ISO 9270:1992, 7/24 tapers for tool shanks for automatic changing Tapers for spindle noses.BS 6607-4: 1994 ISO 9524:1993 BSI 389 Chiswick High Road Lo

31、ndon W4 4AL BSIBritishStandardsInstitution BSI is the independent national body responsible for preparing BritishStandards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter. Revisions BritishStandards are updated by amendment or revis

32、ion. Users of BritishStandards should make sure that they possess the latest amendments or editions. It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this BritishStandard would inform the

33、Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel:02089969000. Fax:02089967400. BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards. Buyin

34、g standards Orders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel:02089969001. Fax:02089967001. In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as Briti

35、shStandards, unless otherwise requested. Information on standards BSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give deta

36、ils on all its products and services. Contact the Information Centre. Tel:02089967111. Fax:02089967048. Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of these and other benefits contact Mem

37、bership Administration. Tel:02089967002. Fax:02089967001. Copyright Copyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the internationalstandardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract ma

38、y be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI. This does not preclude the free use, in the course of implementing the standard, of necessary details such as symbols,

39、and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. If permission is granted, the terms may include royalty payments or a licensing agreement. Details and advice can be obtained from the Copyright Manager. Tel:02089967070.