BS 6843-2-1988 Classification of petroleum fuels - Gas turbine fuels for industrial and marine applications《石油燃料的分类 第2部分 工业用和船舶用燃气轮机燃料》.pdf

1、BRITISH STANDARD BS 6843-2: 1988 ISO 8216-2: 1986 Classification of petroleum fuels Part 2: Gas turbine fuels for industrial and marine applications ISO title: Petroleum products Fuels (class F) Classification Part 2: Categories of gas turbine fuels for industrial and marine applications UDC 665.6.7

2、3.75.76.761.777.4:662.76:621.438 + 061.5 + 629.12:005.168.2BS6843-2:1988 This British Standard, having been prepared under the directionof the Petroleum Standards Committee, was published under the authorityofthe Board of BSI andcomes intoeffect on 29 February 1988 BSI 07-1999 The following BSI refe

3、rences relate to the work on this standard: Committee reference PTC/2 Draft for comment 86/50526 DC ISBN 0 580 16348 2 Committees responsible for this British Standard The preparation of this British Standard was entrusted by the Petroleum Standards Committee (PTC/-) to Technical Committee PTC/2, up

4、on which the following bodies were represented: British Combustion Equipment Manufacturers Association British Railways Board Chemical Industries Association Chief and Assistant Chief Fire Officers Association Department of Energy (Oil Division) Department of Health and Social Security Department of

5、 Transport (Highways) Department of Transport (Marine Directorate) Electricity Supply Industry in England and Wales Federation of Petroleum Suppliers Freight Transport Association General Council of British Shipping Institute of Petroleum Institute of Road Transport Engineers (Incorporated) Institut

6、e of Trading Standards Administration London Regional Transport Ministry of Defence National Farmers Union Oil Appliances Manufacturers Association Road Haulage Association Ltd. Society of Motor Manufacturers and Traders Limited United Kingdom Petroleum Industry Association Ltd. Amendments issued si

7、nce publication Amd. No. Date of issue CommentsBS 6843-2:1988 BSI 07-1999 i Contents Page Committees responsible Inside front cover National foreword ii 1 Scope and field of application 1 2 Reference 1 3 Explanation of symbols 1 4 Detailed classification of gas turbine fuels 1 Bibliography 2 Publica

8、tions referred to Inside back coverBS6843-2:1988 ii BSI 07-1999 National foreword This Part of BS6843 has been prepared under the direction of the Petroleum Standards Committee. It is identical with ISO8216-2:1986 “Petroleum products Fuels (class F) Classification Part2: Categories of gas turbine fu

9、els for industrial and marine applications”, published by the International Organization for Standardization (ISO). ISO8216-2 was prepared as a result of discussion in subcommittee4, Classifications and specifications, of Technical Committee 28, Petroleum products and lubricants, in which the UK par

10、ticipated. A general classification of petroleum products (ISO8681) prepared in ISO/TC28 has allocated class F to petroleum fuels. ISO8216 is being issued in several Parts covering the classification of different types of fuel. The following other Parts of BS6843 have been published to implement the

11、 corresponding Parts of ISO8216. Part 0: General classification; Part 1: Marine fuels; Part 3: Liquefied petroleum gases. Terminology and conventions. The text of the international standard has been approved as suitable for publication as a British Standard without deviation. Some terminology and ce

12、rtain conventions are not identical with those used in British Standards; attention is drawn especially to the following. Wherever the words “part of ISO8216” appear, referring to this standard, they should be read as “Part of BS6843”. It is intended that ISO8217, referred to in the bibliography for

13、 information only, will be implemented as a British Standard as a revision of BSMA100. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of i

14、tself confer immunity from legal obligations. Cross-references International standard Corresponding British Standard ISO 8216-0 BS 6843 Classification of petroleum fuels Part 0:1988 General classification (Identical) Summary of pages This document comprises a front cover, an inside front cover, page

15、s i and ii, pages 1 and 2, an inside back cover and a back cover. This standard has been updated (see copyright date) and may have had amendments incorporated. This will be indicated in the amendment table on the inside front cover.BS6843-2:1988 BSI 07-1999 1 1 Scope and field of application This pa

16、rt of ISO8216 establishes the detailed classification of gas turbine fuels for industrial and marine applications, but excluding aircraft fuels. It should be read in conjunction with ISO8216-0. The fuels in this classification are for use in industrial gas turbines and gas turbines derived from avia

17、tion turbines that are used in static and marine applications. The classification includes only fuels that are liquid under atmospheric pressure and at their normal storage temperatures. Petroleum fuels, being the result of the processing of crude oils of diverse origin, cannot be chemically defined

18、, but may be categorized generally within the scope of this part of ISO8216. 2 Reference ISO 8216-0, Petroleum products Fuels (class F) Classification Part0: General. 3 Explanation of symbols 3.1 The detailed classification of gas turbine fuels into categories of products has been established for st

19、atic and marine applications from two of the families of products (D and R) defined in the general classification (D for distillate fuels or mainly distillate and R for residual fuels). 3.2 According to ISO8216-0, the products are designated by a symbol consisting of a group of letters, which togeth

20、er constitute a code. This code consists of the initials ISO; the letter F (for the class fuels); the category of fuel, consisting of3 letters, the first letter of this category always being the family letter (D for distillate, R for residual fuel). In this case, the second letter (S or M) indicates

21、 the field of application, S for static, M for marine, and the third letter T designates the final application, gas turbines; numbers, which complete the designation of the code (0, 1, 2, 3, 4). They are for further classification on the basis of the properties with the corresponding remarks, and ha

22、ve no numerical significance in terms of definitions of product properties. 3.3 In this classification system, products are designated in a uniform manner. A product may be designated in the complete form, for example ISO-F-DMT2, or in the abbreviated form, for example F-DMT2. 4 Detailed classificat

23、ion of gas turbine fuels Family: subdivision in relation to the type of fuel Designation symbol ISO-F Remarks Category: subdivision according to applications Distinguishing number Distillate fuel DST 0 A low flash point petroleum distillate, naphta type DST DMT a 1 1 A medium flash point petroleum d

24、istillate, jet fuel (kerosine) type DST DMT a 2 2 A petroleum distillate, gas-oil type DST DMT 3 3 Low-ash petroleum distillate Residual fuel-oil RST RMT 3 3 Low-ash petroleum residual fuel which may contain heavy components from petroleum processing RST RMT 4 4 Petroleum residual fuel containing he

25、avy components from petroleum processing a With reference to classes DMT 1 and DMT 2, attention is drawn to the limits for minimum flash point in the 1981 Amendment to the International Convention for the Safety of Life at Sea 19741BS6843-2:1988 2 BSI 07-1999 Bibliography 1 ISO 8217, Petroleum produ

26、cts Fuels (class F) Marine fuels Specifications.BS6843-2:1988 BSI 07-1999 Publications referred to See national foreword.BS 6843-2: 1988 ISO 8216-2: 1986 BSI 389 Chiswick High Road London W4 4AL BSIBritishStandardsInstitution BSI is the independent national body responsible for preparing BritishStan

27、dards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter. Revisions BritishStandards are updated by amendment or revision. Users of BritishStandards should make sure that they possess the latest amendments or editions. It is the consta

28、nt aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this BritishStandard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel:0

29、2089969000. Fax:02089967400. BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards. Buying standards Orders for all BSI, international and foreign standards publications should be addressed to Customer Serv

30、ices. Tel:02089969001. Fax:02089967001. In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as BritishStandards, unless otherwise requested. Information on standards BSI provides a wide range of information on nationa

31、l, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give details on all its products and services. Contact the Information Centre. Tel:02089967111. Fax:02089967048. Subscribing m

32、embers of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of these and other benefits contact Membership Administration. Tel:02089967002. Fax:02089967001. Copyright Copyright subsists in all BSI publications. BSI a

33、lso holds the copyright, in the UK, of the publications of the internationalstandardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, photocopying, re

34、cording or otherwise without prior written permission from BSI. This does not preclude the free use, in the course of implementing the standard, of necessary details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. If permission is granted, the terms may include royalty payments or a licensing agreement. Details and advice can be obtained from the Copyright Manager. Tel:02089967070.