BS 7011-2 1-1989 Consumable accessories for light microscopes - Slides - Specification for dimensions and optical properties《光学显微镜的消耗性附件 第2部分 载波片 第1节 尺寸和光学性能规范》.pdf

1、BRITISH STANDARD BS 7011-2.1: 1989 Consumable accessories for light microscopes Part 2: Slides Section 2.1 Specification for dimensions and optical properties NOTEIt is essential that this section is read in conjunction with the general information given in BS7011-0 “General Introduction”. which is

2、published separately. UDC 681.723:681.7.074.2:681.785.6:(083.74)BS7011-2.1:1989 This British Standard, having been prepared under the directionof the Laboratory Apparatus Standards Committee,was published underthe authority of the BoardofBSI and comes into effect on 28 February 1989 BSI 09-1999 The

3、Committees responsible forthis British Standard are shown in Part0. The following BSI references relate to the work on this standard: Committee reference LBC/33 Draft for comment 87/52976 DC ISBN 0 580 16816 6 Foreword This Section of BS7011 has been prepared under the direction of the Laboratory Ap

4、paratus Standards Committee. It supersedes some of the requirements given in BS3836-1:1974, which are deleted by amendment. This Section of BS7011 is related to ISO8037-1:1986 “Optics and optical instruments Microscopes Slides Part1: Dimensions, optical properties and marking”, published by the Inte

5、rnational Organization for Standardization (ISO), and differs from the technical requirements of the International Standard in the following respects. Three nominal thicknesses and tolerances (0.9,1.0 and1.1mm 0.1mm) are specified instead of a single thickness range (0.9mm to1.2mm). The tolerance on

6、 the length ismm instead ofmm. The tolerance on the width ismm instead of mm. The other Parts and Sections of this standard are listed in Part0. Purchasers ordering to this standard are advised to specify in their purchasing contract that the supplier operates a quality system in compliance with BS5

7、750-3 to ensure that products claimed to comply with BS7011-2.1 consistently achieve the required level of quality. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a B

8、ritish Standard does not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, pages i and ii, pages 1 and 2, an inside back cover and a back cover. This standard has been updated (see copyright date) and may have had amendme

9、nts incorporated. This will be indicated in the amendment table on the inside front cover. +0 0.5 +0 1 +0 0.5 + 0 1 Amendments issued since publication Amd. No. Date of issue CommentsBS7011-2.1:1989 BSI 09-1999 i Contents Page Foreword Inside front cover 1 Scope 1 2 Dimensions 1 3 Design 1 4 Optical

10、 properties 1 5 Marking 1 Table 1 Nominal dimensions of microscope slides 1 Table 2 Tolerances on dimensions of microscope slides 1 Publications referred to Inside back coverii blankBS7011-2.1:1989 BSI 09-1999 1 1 Scope This Section of BS7011 specifies the dimensions and optical properties of a rang

11、e of twelve nominal sizes of microscope slides suitable for use for transmitted light microscopy in the visible spectral range. NOTE 1The visible spectral range is defined as being the range from400nm to760nm. NOTE 2The titles of the publications referred to in this Section are listed on the inside

12、back cover. 2 Dimensions The dimensions of the microscope slides shall be one of the sizes given inTable 1 and within the tolerances given inTable 2. Table 1 Nominal dimensions of microscopeslides Table 2 Tolerances on dimensions of microscope slides 3 Design The microscope slides shall be rectangul

13、ar. 4 Optical properties The microscope slides shall have a principle refractive index (n e ) of1.53 0.02. NOTEThe principle refractive index n e , is the refractive index of light at the green mercury e-line (2 e= 546.07nm, see BS7017). This wavelength is close to the maximum sensitivity of the eye

14、 and has been used as the principal wavelength of optical computation for some time. 5 Marking Each package of microscope slides shall be clearly labelled with the following information: a) the nominal dimensions; b) the makers and/or vendors name or mark; 1) the number and date of this Section of t

15、his British Standard, i.e. BS7011-2.1:1989 1) ; or 2) for microscope slides which comply also with Section2.2 2)of this British Standard, the number of Part2 of this British Standard, i.e.BS7011-2 1) . Thickness Length Width mm mm mm 0.9 45 26 26 76 39 51 1.0 45 26 26 76 39 51 1.1 45 26 26 76 39 51

16、Dimension Tolerance mm Thickness 0.1 Length +0 0.5 Width +0 0.5 1) Marking BS7011-2 or BS7011-2.1:1989 on or in relation to a product represents a manufacturers declaration of conformity, i.e.in the case of the former, a claim by or on behalf of the manufacturer that the product meets the requiremen

17、ts of Section2.1 and Section2.2 of this standard, or, in the case of the latter, that the product meets the requirements of Section2.1 of this standard. The accuracy of the claim is therefore solely the responsibility of the person making the claim. Such a declaration is not to be confused with thir

18、d party certification of conformity, which may also be desirable. 2) In preparation.2 blankBS7011-2.1:1989 BSI 09-1999 Publications referred to BS 3836, Specification for components of microscopes 3) . BS 3836-1, Microscope cover slips and slides and immersion fluid. BS 5750, Quality systems 3) . BS

19、 5750-3, Specification for final inspection and test. BS 7017, Specification for reference wavelengths for optics and optical instruments. ISO 8037-1, Optics and optical instruments Microscopes Slides Part1: Dimensions, optical properties and marking 3) . 3) Referred to in the foreword only.BS 7011-

20、2.1: 1989 BSI 389 Chiswick High Road London W4 4AL BSIBritishStandardsInstitution BSI is the independent national body responsible for preparing BritishStandards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter. Revisions BritishStan

21、dards are updated by amendment or revision. Users of BritishStandards should make sure that they possess the latest amendments or editions. It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using

22、 this BritishStandard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel:02089969000. Fax:02089967400. BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive

23、the latest editions of standards. Buying standards Orders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel:02089969001. Fax:02089967001. In response to orders for international standards, it is BSI policy to supply the BSI implementation of

24、those that have been published as BritishStandards, unless otherwise requested. Information on standards BSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information serv

25、ices are also available which give details on all its products and services. Contact the Information Centre. Tel:02089967111. Fax:02089967048. Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details

26、of these and other benefits contact Membership Administration. Tel:02089967002. Fax:02089967001. Copyright Copyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the international standardization bodies. Except as permitted under the Copyright, De

27、signs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI. This does not preclude the free use, in the course of implementing the standard

28、, of necessary details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. If permission is granted, the terms may include royalty payments or a licensing agreement. Details and advice can be obtained from the Copyright Manager. Tel:02089967070.