1、BS 7412:2007Specification for windows and doorsets made from unplasticized polyvinyl chloride (PVC-U) extruded hollow profilesICS 91.060.50NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBRITISH STANDARDPublishing and copyright informationThe BSI copyright notice displayed in t
2、his document indicates when the document was last issued. BSI 2007ISBN 978 0 580 50204 0The following BSI references relate to the work on this standard:Committee reference B/538/1+2Draft for comment 06/30143171 DCPublication historyFirst published March 1991Second edition, March 2002Third (present)
3、 edition, April 2007Amendments issued since publicationAmd. no. Date Text affectedBS 7412:2007 BSI 2007 iBS 7412:2007ContentsForeword iii1 Scope 12 Normative references 13 Terms and definitions 44 Handing 55 Components 56 Appearance and finish 77 Fabrication 78 Glazing 99 Use, cleaning and maintenan
4、ce 910 Security 911 Safety in case of fire 1012 Safety in use 1013 Weathertightness 1014 Operation and strength characteristics 1015 Hygiene, health and the environment 1016 Acoustic performance 1117 Energy conservation 1118 Marking 11AnnexesAnnex A (informative) Guidance on the evaluation of confor
5、mity 12Annex B (informative) Durability and recycling 13Annex C (normative) Specification for handing 16Annex D (normative) Weld test 17Annex E (normative) Mechanical joint tests (mullion and transom joints) 19Bibliography 24List of figuresFigure C.1 Drawing conventions for window and door types 16F
6、igure D.1 Apparatus for weld test 18Figure E.1 Window type and inspection apertures 19Figure E.2 Test pieces for the watertightness test 20Figure E.3 Thermal stress test 21Figure E.4 Arrangement for torsion test 22Figure E.5 Torsion test loading cycle 22Summary of pagesThis document comprises a fron
7、t cover, an inside front cover, pages i to iv, pages 1 to 25 and a back cover.ii BSI 2007 This page deliberately left blankBS 7412:2007 BSI 2007 iiiBS 7412:2007ForewordPublishing informationThis British Standard is published by BSI and came into effect on 30 April 2007. It was prepared by Subcommitt
8、ees B/538/1, Windows, and B/538/2, Doors, under the authority of Technical Committee B/538, Doors, windows, shutters, hardware and curtain walling. A list of organizations represented on these committees can be obtained on request to their secretary.SupersessionThis British Standard supersedes BS 74
9、12:2002, which will be withdrawn in December 2008.Relationship with other publicationsThe requirements for raw materials and properties of the finished profile for white PVC-U extruded hollow profiles are specified in BS EN 12608. The requirements for surface covered PVC-U extruded hollow profiles a
10、re specified in BS 7722.This British Standard is related to the following other standards. BS EN 14351-1 is the harmonized European product standard for windows and external pedestrian doorsets without resistance to fire and smoke leakage characteristics. It gives a list of performance characteristi
11、cs and classifications of performance, but does not give guidance on determining the appropriate classification for any specific application. BS 6375 (currently in two parts, with a third in preparation) is the national application document in the UK, giving performance requirements and guidance for
12、 the selection of appropriate classes of performance from BS EN 14351-1. The performance aspects in BS 6375 are referred to in BS 7412.Guidance on the survey and installation of windows and doorsets is given in BS 8213-4.Information about this documentThis is a full revision of the standard, and int
13、roduces the following principal changes: changes to take into account the publication of harmonized European product standard EN 14351 in three parts; information on how the requirements relate to the European Construction Products Directive.Presentational conventionsThe provisions of this standard
14、are presented in roman (i.e. upright) type. Its requirements are expressed in sentences in which the principal auxiliary verb is “shall”.Commentary, explanation and general informative material is presented in smaller italic type, and does not constitute a normative element.BS 7412:2007iv BSI 2007Co
15、ntractual and legal considerationsThis publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application.Compliance with a British Standard cannot confer immunity from legal obligations.Attention is drawn to the Building Regulations
16、 2000 and subsequent amendments 1, the Building (Scotland) Regulations 2004 2 and the Building Regulations (Northern Ireland) 2000 3. BSI 2007 1BS 7412:20071 ScopeThis British Standard specifies requirements for the design, fabrication and performance of windows and glazed doorsets made from PVC-U e
17、xtruded hollow profiles.This British Standard applies to windows and doorsets manufactured from PVC-U hollow profiles incorporating fusion welded corner joints.It applies to windows and doors fabricated into frames in a factory, to be installed vertically (within 15) into the external face of buildi
18、ngs, as single or multi-light units, in coupled assemblies when appropriate, of the following types:a) windows:1) hinged: side-hung (open in or out), top-hung (open out), bottom-hung (open in), tilt and turn or turn before tilt;2) projecting: side-hung (open in or open out) and top-hung (open out or
19、 reversible);3) pivoted: horizontal and vertical (hung centrally or off-centre) including reversible; 4) sliding: horizontal and vertical;5) side-hung: fully reversible;6) fixed light;b) doors:1) single leaf single-swing doors with or without side lights and top panels;2) double leaf single-swing do
20、ors with or without side lights and top panels.It is applicable to assemblies in which any frame member is not longer than 3 m. It does not apply to curtain walls that span across horizontal structural members of floors but is applicable to windows within a curtain walling system.It is applicable to
21、 assemblies up to the point of installation.NOTE Guidance on the evaluation of conformity is given in Annex A. Guidance on durability and recycling is given in Annex B.2 Normative referencesThe following referenced documents are indispensable for the application of this document. For dated reference
22、s, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.Standards publicationsBS 4255-1, Rubber used in preformed gaskets for weather exclusion from buildings Part 1: Specification for non-cellular gasketsBS 6100-1 (
23、BS ISO 6707-1), Building and civil engineering Vocabulary Part 1: General termsBS 7412:20072 BSI 2007BS 6100-1.3.5, Glossary of building and civil engineering terms Part 1: General and miscellaneous Subsection 1.3: Parts of construction works Subsection 1.3.5: Doors, windows and openingsBS 6100-1.3.
24、6, Glossary of building and civil engineering terms Part 1: General and miscellaneous Subsection 1.3: Parts of construction works Subsection 1.3.6: Jointing products, builders hardware and accessoriesBS 6100-1.5.1, Glossary of building and civil engineering terms Part 1: General and miscellaneous Su
25、bsection 1.5: Operations; associated plant and equipment Subsection 1.5.1: Co-ordination of dimensions; tolerances and accuracyBS 6100-1.6, Glossary of building and civil engineering terms Part 1: General and miscellaneous Subsection 1.6: PersonsBS 6262 (all parts), Glazing for buildingsBS 6375 (bot
26、h parts), Performance of windows and doorsBS 7722, Surface covered PVC-U profiles for windows and doors SpecificationBS 7950:1997, Specification for enhanced security performance of windows for domestic applicationsBS 8000-7, Workmanship on building sites Part 7: Code of practice for glazingPAS 24-1
27、:1999, Enhanced security performance requirements for door assemblies Part 1: Single and double leaf, hinged external door assemblies to dwellingsBS EN 485-2, Aluminium and aluminium alloys Sheet, strip and plate Part 2: Mechanical propertiesBS EN 514, Unplasticized polyvinylchloride (PVC-U) profile
28、s for the fabrication of windows and doors Determination of the strength of welded corners and T-jointsBS EN 515, Aluminium and aluminium alloys Wrought products Temper designationsBS EN 572 (all parts), Glass in building Basic soda lime silicate glass productsBS EN 755-9, Aluminium and aluminium al
29、loys Extruded rod/bar, tube and profiles Part 9: Profiles, tolerances on dimensions and formBS EN 1027, Windows and doors Watertightness Test methodBS EN 1096 (all parts), Glass in building Coated glassBS EN 1279 (all parts), Glass in building Insulating glass unitsBS EN 1670:1998, Building hardware
30、 Corrosion resistance Requirements and test methodsBS EN 1863 (both parts), Glass in building Heat strengthened soda lime silicate glassBS EN 10088-2, Stainless steels Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes BSI 2007 3BS 7412:2007BS
31、EN 10327:2004, Continuously hot-dip coated strip and sheet of low carbon steels for cold forming Technical delivery conditionsBS EN 12150 (both parts), Glass in building Thermally toughened soda lime silicate safety glassBS EN 12211, Windows and doors Resistance to wind load Test methodBS EN 12337 (
32、both parts), Glass in building Chemically strengthened soda lime silicate glassBS EN 12608:2003, Unplasticized polyvinylchloride (PVC-U) profiles for the fabrication of windows and doors Classification, requirements and test methodsBS EN 13024 (both parts), Glass in building Thermally toughened boro
33、silicate safety glassBS EN 13141-1, Ventilation for buildings Performance testing of components/products for residential ventilation Part 1: Externally and internally mounted air transfer devicesBS EN 13142, Ventilation for buildings Components/products for residential ventilation Required and optio
34、nal performance characteristicsBS EN 14178 (both parts), Glass in building Basic alkaline earth silicate glass productsBS EN 14179 (both parts), Glass in building Heat-soaked thermally-toughened soda lime silicate safety glassBS EN 14321 (both parts), Glass in building Thermally toughened alkaline e
35、arth silicate safety glassBS EN 14449, Glass in building Laminated glass and laminated safety glass Evaluation of conformity/product standardBS EN ISO 4042, Fasteners Electroplated coatingsBS EN ISO 105-A01:1996, Textiles Tests for colour fastness Part A01: Standard depths: mattOther publicationsBRI
36、TISH PLASTICS FEDERATION. Code of practice for the reinforcement of high impact modified PVC-U windows and doors. 323/1. London: British Plastics Federation, 1991.1)BRITISH PLASTICS FEDERATION. Materials for gaskets and weatherstrips for windows, doors, conservatories and curtain walling Specificati
37、on and performance requirements. 345/2. London: British Plastics Federation, 2004.1)BRITISH PLASTICS FEDERATION. Infill panels for doors and windows. 355/1. London: British Plastics Federation, 1996.1)BRITISH PLASTICS FEDERATION. Specification and guidelines for the selection and application of fast
38、eners for the manufacture of plastics windows and doors. 363/1. London: British Plastics Federation, 2001.1)1)British Plastics Federation, 6 Bath Place, Rivington Street, London EC2A 3JE. Telephone 020 7457 5000. www.bpf.co.uk.BS 7412:20074 BSI 20073 Terms and definitionsFor the purposes of this Bri
39、tish Standard, the terms and definitions given in BS 6100-1, BS 6100-1.3.5, BS 6100-1.3.6, BS 6100-1.5.1 and BS 6100-1.6 and the following apply.3.1 casementframed opening window light that is hinged or pivoted3.2 coupled assemblytwo or more windows and/or doorsets mechanically joined to fill an ope
40、ningNOTE This was previously known as a composite assembly.3.3 cycleset of operations required to take a window or door from the closed and fully locked condition to the fully opened condition and back to the closed and fully locked position3.4 door framepart of a doorset surrounding the door leaf a
41、nd to which the door leaf is hinged3.5 door leafhinged, moving element within a doorset3.6 doorsetcomplete unit, as installed, comprising door leaf, door frame, any associated side panels or top lights, and any operating hardware, locks and accessoriesNOTE This is also known as a door assembly.3.7 f
42、inger operatedoperation of hardware by the use of fingers only without palm contactNOTE This might or might not include the use of a key.3.8 fixingcomponent that is used to secure separate parts of a window or doorset to each other, to secure an item of hardware to a window or door part, or to secur
43、e a completed window or doorset into the structure of a building3.9 glazing gasketplastic or synthetic flexible member used between the glazing and the frame and/or between the glazing and the glazing bead3.10 hand operatedoperation of hardware by full use of the hand including palm contactNOTE This
44、 might or might not include the use of a key.3.11 hardwaredevice attached to a structural member to facilitate opening, closing or making the product secure in the frame3.12 multi-light window incorporating two or more lights, opening and/or fixed, within one perimeter frame BSI 2007 5BS 7412:20073.
45、13 rangegroup of assemblies with defined limits of size, type, configuration, hardware, glazing, construction and security features3.14 sashframed opening light that slides3.15 switch barrierdevice that prevents a tilt and turn window from engaging in the tilt mode and the turn mode at the same time
46、3.16 ventilation deviceventilator other than an opening light incorporated into a windowNOTE 1 A permanent ventilation device provides continuous ventilation. A controlled device can be closed and may be adjusted to provide ventilation.NOTE 2 A ventilation device is referred to as an “air transfer d
47、evice” in BS EN 13142 and is frequently referred to as a “trickle ventilator” in the UK.3.17 weathersealresilient material designed to reduce air infiltration and water penetrationNOTE This is sometimes referred to as weatherstrip.4HandingThe handing shall be in accordance with the specification pro
48、vided.Where the manufacturer is specifying the handing, the specification shall conform to Annex C.NOTE Where the manufacturer is not specifying the handing, care should be taken to check the handing designation. See Annex C, Note to C.1.5 Components5.1 PVC-U extruded hollow profilesWhite PVC-U extr
49、uded hollow profiles used in plastics windows and doorsets shall conform to BS EN 12608.Surface covered PVC-U extruded hollow profiles used in plastics windows and doorsets shall conform to BS 7722.5.2 GlassThe type and quality of glass used in plastics windows and doorsets shall conform to the following standards as appropriate: BS EN 572 for basic soda lime silicate glass products; BS EN 1096 for
copyright@ 2008-2019 麦多课文库（www.mydoc123.com）网站版权所有
备案/许可证编号：苏ICP备17064731号-1