BS 7560-1992 Method of assessing testing and reporting characteristics and performance of combine harvesters《联合收割机性能评定、试验和报告方法》.pdf

1、BRITISH STANDARD BS7560:1992 ISO8210:1989 Method of Assessing, testing and reporting characteristics and performance of combine harvestersBS7560:1992 This BritishStandard, having been prepared under the directionof the Agricultural Machinery and Implements Standards Policy Committee, waspublished un

2、der the authorityof the Standards Boardand comes into effect on 1April1992 BSI 11-1999 The following BSI references relate to the work on this standard: Committee reference AGE/23 Draft for comment85/79520DC ISBN 0 580 20600 9 Committees responsible for this BritishStandard The preparation of this B

3、ritish Standard was entrusted by the Agricultural Machinery and Implements Standards Policy Committee (AGE/-) to Technical Committee AGE/23, upon which the following bodies were represented: Agricultural Engineers Association British Agricultural and Garden Machinery Association Ltd. Council of Scot

4、tish Agricultural Colleges Department of Agriculture and Fisheries for Scotland Flour Milling and Baking Research Association Health and Safety Executive Ministry of Agriculture, Fisheries and Food National Farmers Union National Farmers Union of Scotland National Institute of Agricultural Engineeri

5、ng National Union of Agricultural and Allied Workers Silsoe College Spring Research and Manufacturers Association Amendments issued since publication Amd. No. Date CommentsBS7560:1992 BSI 11-1999 i Contents Page Committees responsible Inside front cover National foreword ii 1 Scope 1 2 Normative ref

6、erences 1 3 Definitions 1 4 General requirements 2 5 Characteristics of machine 2 6 Functional field tests 2 7 Capacity tests 3 8 Test report 6 Annex A (normative) Tests on sloping ground 7 Publication(s) referred to Inside back coverBS7560:1992 ii BSI 11-1999 National foreword This BritishStandard

7、has been prepared under the direction of the Agricultural Machinery and Implements Standards Policy Committee and is identical with ISO8210:1989 “Equipment for harvesting Combine harvesters Test procedure” prepared by Technical Committee ISO/TC23, Tractors and machinery for agriculture and forestry,

8、 of the International Organization for Standardization (ISO). Technical Committee AGE/23 has reviewed the provisions of ISO500:1979 1) ; ISO3767-1:1982; ISO3767-2:1982; ISO3789-1:1982; ISO3789-2:1982; ISO3965:1977 2) ; ISO4254-1:1989; ISO/TR5007:1980; ISO5131:1982; ISO5702:1983; ISO6689:1981 to whic

9、h reference is made in the text, and has decided that they are acceptable for use in conjunction with this standard. ISO6095, to which reference is made in clause2 and6.2.2.1, has not yet been published. A British Standard does not purport to include all the necessary provisions of a contract. Users

10、 of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, pagesi andii, pages1 to8, an inside back cover and a back

11、cover. This standard has been updated (see copyright date) and may have had amendments incorporated. This will be indicated in the amendment table on the inside front cover. Cross-references International Standard Corresponding British Standard BS6347: Performance assessment of agricultural tractors

12、 ISO789-3:1982 Part3:1983 Method for determination of turning and clearance diameters (Identical) ISO789-6:1982 Part6:1983 Method for determination of centre of gravity (Identical) ISO3600:1981 BS5401:1982 aGuide for the presentation of operator manuals and technical publications dealing with tracto

13、rs and machinery for agriculture and forestry (Identical) ISO5687:1981 BS6621:1985 Method for determination of combine harvester capacity and unloading rate (Identical) ISO5697:1982 BS6384:1983 Methods for determination of braking performance of agricultural and forestry vehicles (Identical) a BS540

14、1 has been revised and is now only related to ISO3600. 1) Now superseded by ISO500:1991 which is identical to BS5861:1992. 2) Now superseded by ISO3965:1990 which is identical to BS5510:1991.BS7560:1992 BSI 11-1999 1 1 Scope This International Standard specifies a test procedure for combine harveste

15、rs; it applies to all types of combine harvesters. The test procedure specified in this International Standard deals with the measurement and testing of combine harvesters, either of self-propelled or trailed type, either directly cutting the crop or picking it up from a wind-row, for use in several

16、 crops. It indicates terminology and methods to be used for measuring important characteristics of combines. It includes both functional and capacity tests, i.e.those conducted over an extended period when ease of operation, ease of adjustment, rate of work and general operating characteristics may

17、be assessed, and those carried out on specific occasions for the determination of grain loss and capacity characteristics. 2 Normative references The following standards contain provisions which, through reference in this text, constitute provisions of this International Standard. At the time of pub

18、lication, the editions indicated were valid. All standards are subject to revision, and parties to agreements based on this International Standard are encouraged to investigate the possibility of applying the most recent editions of the standards listed below. Members of IEC and ISO maintain registe

19、rs of currently valid International Standards. ISO500:1979, Agricultural tractors Power take-off and drawbar Specification. ISO789-3:1982, Agricultural tractors Test procedures Part3: Turning and clearance diameters. ISO789-6:1982, Agricultural tractors Test procedures Part6: Centre of gravity. ISO3

20、600:1981, Tractors and machinery for agriculture and forestry Operator manuals and technical publications Presentation. ISO3767-1:1982, Tractors and machinery for agriculture and forestry, powered lawn and garden equipment Symbols for operator controls and other displays Part1: Common symbols. ISO37

21、67-2:1982, Tractors and machinery for agriculture and forestry, powered lawn and garden equipment Symbols for operator controls and other displays Part2: Symbols for agricultural tractors and machinery. ISO3789-1:1982, Tractors, machinery for agriculture and forestry, powered lawn and garden equipme

22、nt Location and method of operation of operator controls Part1: Common controls. ISO3789-2:1982, Tractors, machinery for agriculture and forestry, powered lawn and garden equipment Location and method of operation of operator controls Part2: Controls for agricultural tractors and machinery. ISO3965:

23、1977, Agricultural wheeled tractors Determination of maximum travel speed. ISO4254-1:1989, Tractors and machinery for agriculture and forestry Technical means for ensuring safety Part1: General. ISO/TR5007:1980, Agricultural wheeled tractors Operator seat Measurement of transmitted vibration. ISO513

24、1:1982, Acoustics Tractors and machinery for agriculture and forestry Measurement of noise at the operators position Survey method. ISO5687:1981, Equipment for harvesting Combine harvester Determination and designation of grain tank capacity and unloading device performance. ISO5697:1982, Agricultur

25、al and forestry tractors and machinery Determination of braking performance. ISO5702:1983, Equipment for harvesting Combine harvester component parts Equivalent terms. ISO6095:, Agricultural machinery Self-propelled combine harvesters Operators workplace and ergonomics 3) . ISO6689:1981, Equipment f

26、or harvesting Combines and functional components Definitions, characteristics and performance. 3 Definitions For the purposes of this International Standard, the terms and definitions given in ISO5702 and ISO6689 and the following definitions apply. 3.1 test machine subject combine to be tested 3.2

27、comparison machine other machine being tested, if applicable 3) To be published.BS7560:1992 2 BSI 11-1999 3.3 test series all the events and data comprising several test runs 3.4 catch mass of any material collected during a test run 4 General requirements 4.1 The way in which the combine was select

28、ed or obtained for testing, and the approximate duration of any running prior to test shall be stated in the test report. 4.2 The combine shall normally be operated in accordance with the manufacturers instructions. The test report shall record and give reasons for any significant departure from the

29、m. 4.3 Commercially available accessories, as necessary or desirable for the various crops in which the combine is to be used, shall be provided. 4.4 Setting and adjustments of the machine shall be generally in accordance with the manufacturers instruction manual: the actual settings shall be record

30、ed and reported. 5 Characteristics of machine 5.1 Significant details All significant details of the combine shall be established and verified in accordance with the definitions, characteristics and performance criteria laid down in ISO6689. The terminology given in ISO5702 and ISO6689 shall be used

31、. 5.2 Speeds For self-propelled machines, measurements of the speed of any component shall be made under “no-load” conditions with the governor control lever set in the normal working position corresponding to the required working machine regime. For PTO (power take-off) driven machines, these speed

32、s shall be measured at standard PTO rotational frequency (540min 1 10min 1or1000min 1 25min 1 ) (see ISO500). Ground speeds shall be measured on a hard horizontal surface (see ISO3965), with the governor control lever in the normal working position and the crop processing mechanism disengaged. If th

33、e machine is fitted with stepless speed change mechanism, the maximum and minimum speeds obtained for each gear shall be measured. Otherwise, speeds obtained for all combinations of the gears shall be measured. 5.3 Position of centre of gravity It should be specified, for the machine tested, whether

34、 it is equipped with powered rear-wheel drive or not and if it has a chopper attachment. NOTEThis is a supplementary measurement applicable to self-propelled machines only. The position of the centre of gravity shall be determined under the following conditions (seeISO789-6): 5.4 Grain tank The grai

35、n tank capacity and unloading time shall be measured in accordance with ISO5687. 6 Functional field tests Functional field tests shall be carried out over an extended period, e.g.several months or a complete harvesting season in a particular area, and should include as wide a range as practicable of

36、 crops, crop varieties and/or crop conditions which are important to that area. 6.1 Information to be recorded In each field worked, the following information shall be recorded: a) atmospheric conditions; b) slope and state of ground; c) shape of field; d) height of stubble; e) crop: variety, condit

37、ion, weed content and approximate yield; f) hours of work; g) approximate area harvested; h) approximate volume of fuel used. 6.2 Behaviour and performance of combine Throughout the test period, the general behaviour and performance of the combine shall be kept under observation, and shall subsequen

38、tly be reported on, with particular reference to the information outlined in6.2.1 to6.2.4. machine: empty of crop; header: fully raised; reel: most forward position; fuel tank(s): full; grain tank(s): full; driver: simulated by a mass of75kg placed on the drivers seat; bagger platform: sacks in plac

39、e to represent most unstable condition of normal field operation.BS7560:1992 BSI 11-1999 3 6.2.1 Functional aspects The operator shall observe and report on the following aspects of the behaviour and performance of the combine: a) the efficiency of cutting, gathering and/or picking up of the crop; b

40、) the occurrence of blockages; c) the adequacy of engine power, governor control and cooling system; d) the grain tank filling or bagging arrangements; e) the discharge of non-grain crop materials; f) the stability of the machine as a whole; g) the adequacy of the means of adjustment; h) the speed o

41、f response to controls of individual mechanisms; i) the effectiveness of grain unloading devices, particularly with moist grain; j) the frequency of refuelling; k) the particulars of circumstances limiting performance; l) the tractive performance in adverse conditions. 6.2.2 Comfort, convenience and

42、 safety 6.2.2.1 The degree of compliance with ISO3767-1, ISO3767-2, ISO3789-1, ISO3789-2, ISO4254-1, ISO5697 and ISO6095 shall be reported. 6.2.2.2 General remarks on the ease of access to the driving position, the identification and ease of operation of the controls, the visibility of the grain tan

43、k contents, the grain unloader and the cutterbar shall also be included in the test report. Information on the adequacy, identification and visibility of instruments shall be included in the test report along with details relating to seating comfort and freedom from vibration, noise, dust, fumes, et

44、c. 6.2.2.3 Measurements of seat vibrations and noise level at the operators workplace, if made, shall be in accordance with ISO5131 and ISO/TR5007 respectively. 6.2.2.4 The test report shall also include information on a) the adequacy and ease of control of cab air conditioning system, if fitted; b)

45、 the adequacy of lighting arrangements, particularly for working after dark; c) the turning radius (see ISO789-3); d) the general ease of handling, and stability of machine, when manoeuvring or driving under road conditions; e) any hazardous features noticed and not covered by the International Stan

46、dards listed in6.2.2.1. 6.2.3 Ease of adjustment and routine maintenance The test report shall include information on the following aspects relating to the ease of adjustment and routine maintenance: a) the clarity of instructions in the operators manual (see ISO3600); b) the ease of adjustment, par

47、ticularly for changes of crop or crop conditions; c) the ease of changing from field condition to transport condition, and vice versa; d) the ease of carrying out routine maintenance operations, e.g.cleaning air filters, changing oils and filters, greasing, checking oil levels, adjusting belt tensio

48、ns, etc.; e) the arrangements for observation of fuel level and refuelling; f) the cleaning out provisions for the machine, especially for changing from one crop to another, and for clearing blockages; g) the arrangements for cleaning out the stone trap; h) the time needed to install the header. 6.2

49、.4 Repairs Any significant failures or repairs necessary during the test period shall be reported. 7 Capacity tests Capacity tests shall be carried out on specific occasions, under particular conditions, to determine the machine capacity as defined in the following sub-clauses. It is preferred that when the test machine is being tested, a comparison machine of established reputation be tested simultaneously and in the same manner. 7.1 Crop selection and field conditions Capacity