BS 9000-2-1996 General requirements for a system for electronic components of assessed quality - Specification for the national implementation of the CECC system《电子元器件质量评定体系的一般要求 第.pdf

1、BRITISH STANDARD BS9000-2: 1996 General requirements for a system for electronic components of assessed quality Part 2: Specification for the national implementation of the CECC systemBS9000-2:1996 This British Standard, having been prepared under the directionof the Electrotechnical Sector Board, w

2、as published underthe authority of the Standards Board and comes intoeffect on 15 May1996 BSI 02-1999 First published September 1983 Second Edition October 1991 Third edition May 1996 The following BSI reference relates to the work on this standard: Committee reference L/9 ISBN 0 580 25435 6 Committ

3、ees responsible for this British Standard The preparation of this British Standard was entrusted to Policy Committee L/9, Electronic Components Policy Committee, upon which the following bodies were represented: Association of Franchised Distributors of Electronic Components British Standards Societ

4、y British Telecommunications plc Federation of the Electronics Industry Ministry of Defence National Supervising Inspectorate (BSI PC) Society of British Aerospace Companies Ltd. Amendments issued since publication Amd. No. Date CommentsBS9000-2:1996 BSI 02-1999 i Contents Page Committees responsibl

5、e Inside front cover Foreword ii 1 Scope 1 2 Operation of the CECC system 1 3 National procedure for implementation 1 Annex A (informative) List of other CECC documents 2 List of references Inside back cover BS9000-2:1996 ii BSI 02-1999 Foreword This Part of BS9000has been prepared by Policy Committ

6、ee L/9. It is a revision of BS9000-2:1991which is withdrawn. The revision of BS9000-2reflects the following: a) changes resulting from the reorganization of BSI Standards Committees; b) transfer of the UK National Supervising Inspectorate responsibilities from MOD/PCS to BSI Product Certification; c

7、) integration of some CECC procedures with CENELEC procedures. This Part of BS9000describes and specifies the national implementation of the CECC 1)Rules of Procedure. NOTEReference should be made to BS9000-3for the national implementation of the IECQ 2)system. A British Standard does not purport to

8、 include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover,

9、pages i and ii, pages1and2, an inside back cover and a back cover. This standard has been updated (see copyright date) and may have had amendments incorporated. This will be indicated in the amendment table on theinside front cover. 1) CENELEC Electronic Components Committee (System for Europe). 2)

10、IEC Quality Assessment System for Electronic Components.BS9000-2:1996 BSI 02-1999 1 1 Scope This Part of BS9000details the national organizations relevant to the implementation of the CECC system for electronic components within the UK. NOTE 1This standard should be read in conjunction with the rele

11、vant Rules of Procedure listed in clause 2. NOTE 2The titles of the publications referred to in this standard are listed on the inside back cover. 2 Operation of the CECC system The following is a list of definitive documents for the implementation of the CECC system for electronic components. BSCEC

12、C00104, Rule of Procedure 4. CECC Working Groups. General rules and additional rules. BSCECC00108, Rule of Procedure 8. Attestation of conformity. BSCECC00111, Rule of Procedure 11. Specifications Part 1: General regulations for CECC Specifications Part 2: Regulations for CECC Specifications for com

13、ponents of enhanced assessment of quality Part 3: Regulations for CECC Specifications for components for general and professional (civil and military) usage (excluding detail specifications) Part 4: Regulations for CECC detail specifications Part 5: Preparation of specifications under the Single Ori

14、ginator Procedure Part 6: Regulations for Process Assessment Schedules (PAS) Part 7: Regulations for component specifications and assessment specifications Part 8: Regulations for Technology Approval Schedules. (TAS) BSCECC00112, Rule of Procedure 12. Voting procedures Part 1: CECC Rules of Procedur

15、e and specifications (excluding ENs) Part 2: CECC European Standards. BS EN100114, Rule of procedure 14. Quality assessment procedures Part 1: Approval of manufacturers and other organizations BSCECC00114, Rule of Procedure 14. Quality assessment procedures Part 2: Qualification approval of electron

16、ic components Part 3: Capability approval of an electronic component manufacturing activity Part 4: Procedure for enhanced assessment of quality Part 5: Process approval of specialist contractors within the electronic components industry Part 6: Technology approval of electronic component manufactur

17、ers. NOTESee Annex A for details of other CECC documents. 3 National procedure for implementation 3.1 National Authorized Institution In the UK the National Authorized Institution (NAI) 3)is the British Electrotechnical Committee(L/). Enquiries concerning standardization should be referred to: The S

18、ecretary of L/9, BSI Standards, 389 Chiswick High Road, London W44AL. Enquiries concerning the application of the system, requests for assessment, etc., should be addressed to the National Supervising Inspectorate, see 3.2. 3.2 National Supervising Inspectorate The UK National Supervising Inspectora

19、te (NSI) 4) , which is a full member of ECQAC 5) , may be contacted at: UK NSI, BSI Product Certification, PO Box375, Milton Keynes, Bucks MK146LL. 3.3 General guidance PD9004gives an introduction to the CECC system. The CECC system has principles similar to those of the now obsolescent UK national

20、system, known as the BS9000system, which is described in BS9000-1, and BS 9000-4 to BS 9000-7. 3) Referred to as the Organisme National Habilit or ONH. 4) Referred to as the Organisme National de Surveillance or ONS. 5) Referred to as the Electronic Components Quality Assurance Committee.BS9000-2:19

21、96 2 BSI 02-1999 Annex A (informative) List of other CECC documents The following is a list of other CECC documents which also apply. It is not intended that these CECC documents be dual numbered as British Standards. However they are valid for use within the UK. NOTEA list of other CECC documents h

22、as not been given at this time as the Technical Committee CECC and the CENELEC Secretariat are currently reviewing all CECC procedures. Until this review is complete the reader is directed to CECC00300 Register of national documents Part I: Numerical list of CECC publications, for details of other C

23、ECC documents available.BS9000-2:1996 BSI 02-1999 List of references (see also clause 2 and Annex A) BS9000, General requirements for a system for electronic components of assessed quality. BS 9000-1:1989, Specification of general procedures 6) . BS 9000-3:1996, Specification for the national implem

24、entation of the IECQ system 7) . BS 9000-4:1991, Specification of procedures for the approval of an organization 6) . BS 9000-5:1989, Specification of qualification approval and conformance testing procedures 6) . BS 9000-6:1989, Specification of capability approval procedures 6) . BS 9000-7:1989, S

25、pecification of lot formation, release procedures and certified test records 6) . PD 9004:1989, BS9000, CECC and IECQ UK administrative guide. 6) Obsolescent. 7) Referred to in the foreword only.BSI 389 Chiswick High Road London W4 4AL | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |

26、| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | BSI British Standards Institution BSI is the independent national body responsible for preparing British Stand

27、ards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter. Revisions British Standards are updated by amendment or revision. Users of British Standards should make sure that they possess the latest amendments or editions. It is the const

28、ant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel

29、: 020 8996 9000. Fax: 020 8996 7400. BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards. Buying standards Orders for all BSI, international and foreign standards publications should be addressed to Custo

30、mer Services. Tel: 020 8996 9001. Fax: 020 8996 7001. In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as British Standards, unless otherwise requested. Information on standards BSI provides a wide range of informa

31、tion on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give details on all its products and services. Contact the Information Centre. Tel: 020 8996 7111. Fax: 020 899

32、6 7048. Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of these and other benefits contact Membership Administration. Tel: 020 8996 7002. Fax: 020 8996 7001. Copyright Copyright subsists in

33、all BSI publications. BSI also holds the copyright, in the UK, of the publications of the international standardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means

34、electronic, photocopying, recording or otherwise without prior written permission from BSI. This does not preclude the free use, in the course of implementing the standard, of necessary details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. If permission is granted, the terms may include royalty payments or a licensing agreement. Details and advice can be obtained from the Copyright Manager. Tel: 020 8996 7070.