BS A 361-2000 Rivets solid 100 normal countersunk head in metallic material with or without surface treatment - Dimensions《经过表面处理或未经过表面处理的金属材料制100度标称埋头实心铆钉 尺寸》.pdf

1、| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | BRITISH STANDARD AEROSPACE SERIES BS A 361

2、:2000 ISO 12281:1999 ICS 49.030.60 NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW Rivets, solid, 1008 normal countersunk head, in metallic material, with or without surface treatment DimensionsThis British Standard, having been prepared under the direction of the Engineering

3、Sector Committee, was published under the authority of the Standards Committee and comes into effect on 15 January 2000 BSI 01-2000 ISBN 0 580 34012 0 BS A 361:2000 Amendments issued since publication Amd. No. Date Comments National foreword This British Standard reproduces verbatim ISO 12281:1999 a

4、nd implements it as the UK national standard. The UK participation in its preparation was entrusted by Technical Committee ACE/12, Aerospace fasteners and fastening systems, to Subcommittee ACE/12/1, Aerospace fasteners and fastening systems (International), which has the responsibility to: aid enqu

5、irers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. A list of organizations r

6、epresented on this subcommittee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Standards Catalogue under the section entitled “International Standards Corr

7、espondence Index”, or by using the “Find” facility of the BSI Standards Electronic Catalogue. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does n

8、ot of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, the ISO title page, page ii, pages 1 to 4, an inside back cover and a back cover. The BSI copyright notice displayed in this document indicates when the document was la

9、st issued.A Referencenumbe r ISO12281:1999 (E) INTERNATIONAL STANDARD ISO 12281 Firstedition 19991101 AerospaceRivets,solid,100normal countersunkhead,inmetallicmaterial,with orwithoutsurfacetreatmentDimensions AronautiqueetespaceRivetsordinaires,ttefraise100normale, enmatriaumtallique,avecousanstrai

10、tementdesurfaceDimensions BS A 361:2000)E(9991:18221OSI ii Foreword ISO (the InternationalOrganizationforStandardization)isaworldwidefederationofnationalstandardsbodies(ISO memberbodies).TheworkofpreparingInternationalStandardsisnormallycarriedoutthroughISOtechnical committees.Eachmemberbodyinterest

11、edinasubjectforwhichatechnicalcommitteehasbeenestablishedhas therighttoberepresentedonthatcommittee.Internationalorganizations,governmentalandnongovernmental,in liaisonwithISO,alsotakepartinthework.ISOcollaboratescloselywiththeInternationalElectrotechnical Commission(IEC)onallmattersofelectrotechnic

12、alstandardization. InternationalStandardsaredraftedinaccordancewiththerulesgivenintheISO/IECDirectives,Part3. DraftInternationalStandardsadoptedbythetechnicalcommitteesarecirculatedtoth ememberbodiesforvoting. PublicationasanInternationalStandardrequiresapprovalbyatleast75%ofthememberbodiescastingav

13、ote. InternationalStandardISO 12281waspreparedbyTechnicalCommitteeISO/TC 20,Aircraftandspacevehicles , SubcommitteeSC4, Aerospacefastenersystems . BS A 361:2000DRADNATSLANOITANRETNI OSI )E(9991:18221OSI 1 AerospaceRivets,solid,100normalcountersunkhead,in metallicmaterial,withorwithoutsurfacetreatmen

14、tDimensions 1Scope ThisInternationalStandardspecifiesthedimensionsofsolidrivets,100 normalcountersunkhead,inmetallic material,withorwithoutsurfacetreatment. ThisInternationalStandardisonlyapplicableforthecompilationofaerospaceproductstandards. 2Normative reference Thefollowingnormativedocumentcontai

15、nsprovisionswhich,throughreferenceinthistext,constituteprovisionsof thisInternationalStandard.Fordatedreferences,subsequentamendmentsto,orrevisionsof,anyofthese publicationsdonotapply.However,partiestoagreementsbasedonthisInternationalStandardareencouragedto investigatethepossibilityofapplyingthemos

16、trecenteditionofthenormativedocumentindicatedbelow.For undatedreferences,thelatesteditionofthenormativedocumentreferredtoapplies.MembersofISOandIEC maintainregistersofcurrentlyvalidInternationalStandards. ISO2862:1988, ISOsystemoflimitsandfitsPart2:Tablesofstandardtolerancegradesandlimitdeviationsfo

17、r holesandshafts. 3 Configurationanddimensions SeeFigure1andTable1.Dimensionsandtolerancesareexpressedinmillimetres.Theyapplyafteranysurface coating(s). BS A 361:2000)E(9991:18221OSI OSI 2 a Thelengthrangeislimited(seeTables2and3). b Blendedconvexformpermissiblewithinlimitingdimensions c Drillstarto

18、ptional,shapeoptional,onlyforcorrosionresistantsteels,nickelalloys,titaniumalloys d Areaofthisdatumshallbeincludedbetween L 5 and L 5 +1. e Chamferorconvexradius,atmanufacturerschoice Figure1 Table1Dimensions (exceptlength L 1 ) Diameter D 1 a D 2 c D 3 D 4 D 5 L 2 L 3 L 4 L 5 L 6 R code d11 b min.

19、max. min. min. 0 0,08 max. min. 0,08 016 1,6 3 2,7 2,25 _ _ 0,59 0,03 0,31 2 _ _ 020 2 3,7 3,3 2,89 _ _ 0,72 0,04 0,34 2,2 _ _ 0,15 025 2,5 4,65 4,15 3,86 2 1,7 0,91 0,05 0,33 2,4 0,8 0,5 030 3 5,55 4,95 4,5 2,4 2,1 1,07 0,06 0,44 2,5 0,9 0,6 035 3,5 6,5 5,8 5,14 2,8 2,45 1,26 0,07 0,57 2,8 1,05 0,7

20、 040 4 7,4 6,6 5,78 3,2 2,8 1,43 0,08 0,68 3 1,2 0,8 050 5 9,25 8,25 7,71 4 3,5 1,8 0,65 3,8 1,5 1 0,25 060 6 11,1 9,9 9 4,8 4,2 2,15 0,1 0,88 4,1 1,8 1,2 080 8 14,8 13,6 12,21 6,4 5,6 2,87 1,09 4,8 2,4 1,6 100 10 18,5 17,3 15,43 8 7 3,59 1,29 5,5 3 2 a Overlength( L 5 L 2 ), D 1 max.mayincreaseby0,

21、03. b InaccordancewithISO2862 c Maximumcondition BS A 361:2000OSI )E(9991:18221OSI 3 Table2Length L 1 forrivetsinaluminiumandaluminiumalloys Diametercode 016 020 025 030 035 040 050 060 080 100 Length Shapeoftailend a code L 1 0 05 + , AAABABABABABABABAB 003 3 X X 0 0 4 4 XXXXXXXX 0 0 5 5 XXXXXXXX 0

22、 0 6 6 XXXXXXXXXX 0 0 7 7 XXXXXXXXXX 0 0 8 8 XXXXXXXXXXXX 0 0 9 9 XXXXXXXXXXXX 0 1 0 1 0 XXXXXXXXXXXXXX 0 1 1 1 1 XXXXXXXXXXXXXX 0 1 2 1 2 XXXXXXXXXXXXXX 0 1 3 1 3 XXXXXXXXXXXXXXXXXX 0 1 4 1 4 XXXXXXXXXXXXXXXXXX 0 1 5 1 5 XXXXXXXXXXXXXXXXXX 0 1 6 1 6 XXXXXXXXXXXXXXXXXX 0 1 7 1 7 XX XXXXXXXXXXXXXX 0

23、1 8 1 8 XX XXXXXXXXXXXXXX 0 1 9 1 9 XX X XXXXXXXXXXXX 0 2 0 2 0 XX X XXXXXXXXXXXX 0 2 2 2 2 XX X X XXXXXXXXXX 0 2 4 2 4 XX X X XXXXXXXXXX 0 2 6 2 6 X X X X XXXXXXXX 0 2 8 2 8 X X X X XXXXXXXX 0 3 0 3 0 X X X X X XXXXXX 0 3 2 3 2 X X X X X XXXXXX 0 3 53 5 XXXXXXX X X X 0 4 04 0 XXXXXXX 045 45 X X X X

24、 X X 050 50 X X X X X 055 55 X X X X 060 60 X X X X a FormA:nonradiusedtailend(seeFigure1) FormB:radiusedtailend(seeFigure1) BS A 361:2000)E(9991:18221OSI OSI 4 Table3Lengths L 1 forrivetsinnickelalloys,corrosionresistantsteels,commerciallypuretitaniumand titaniumalloys Diametercode 016 020 025 030

25、035 040 050 060 Length Shapeoftailend a code L 1 0 05 + , AAABABABABABAB 003 3 X X 0 0 4 4 XXXXXXXX 0 0 5 5 XXXXXXXX 0 0 6 6 XXXXXXXXXX 0 0 7 7 XXXXXXXXXX 0 0 8 8 XXXXXXXXXXXX 0 0 9 9 XXXXXXXXXXXX 0 1 0 1 0 XXXXXXXXXXXXXX 0 1 1 1 1 XXXXXXXXXXXXXX 0 1 2 1 2 XXXXXXXXXXXXXX 0 1 3 1 3 XXXXXXXXXXXXXX 0 1

26、 4 1 4 XXXXXXXXXXXXXX 0 1 5 1 5 XXXXXXXXXXXXXX 0 1 6 1 6 XXXXXXXXXXXXXX 0 1 7 1 7 XX XXXXXXXXXX 0 1 8 1 8 XX XXXXXXXXXX 0 1 9 1 9 X X XXXXXXXX 0 2 0 2 0 X X XXXXXXXX 0 2 2 2 2 X X XXXXXX 0 2 4 2 4 X X XXXXXX 0 2 6 2 6 X X XXXX 0 2 8 2 8 X X XXXX 030 30 X X X X 032 32 X X X X 035 35 X X 040 40 X X a

27、FormA:nonradiusedtailend(seeFigure1) FormB:radiusedtailend(seeFigure1) BS A 361:2000BS A 361:2000 ISO 12281:1999 BSI 389 Chiswick High Road London W4 4AL | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |

28、| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | BSI British Standards Institution BSI is the independent national body responsible for preparing British Standards. It presents the UK view on standards in Europe and at the international leve

29、l. It is incorporated by Royal Charter. Revisions British Standards are updated by amendment or revision. Users of British Standards should make sure that they possess the latest amendments or editions. It is the constant aim of BSI to improve the quality of our products and services. We would be gr

30、ateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel: 020 8996 9000. Fax: 020 8996 7400. BSI offers members an individual updating ser

31、vice called PLUS which ensures that subscribers automatically receive the latest editions of standards. Buying standards Orders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel: 020 8996 9001. Fax: 020 8996 7001. In response to orders for in

32、ternational standards, it is BSI policy to supply the BSI implementation of those that have been published as British Standards, unless otherwise requested. Information on standards BSI provides a wide range of information on national, European and international standards through its Library and its

33、 Technical Help to Exporters Service. Various BSI electronic information services are also available which give details on all its products and services. Contact the Information Centre. Tel: 020 8996 7111. Fax: 020 8996 7048. Subscribing members of BSI are kept up to date with standards developments

34、 and receive substantial discounts on the purchase price of standards. For details of these and other benefits contact Membership Administration. Tel: 020 8996 7002. Fax: 020 8996 7001. Copyright Copyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications

35、 of the international standardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written permission

36、from BSI. This does not preclude the free use, in the course of implementing the standard, of necessary details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. If permission is granted, the terms may include royalty payments or a licensing agreement. Details and advice can be obtained from the Copyright Manager. Tel: 020 8996 7070.