BS DD CEN TS 15048-2006 Liming materials — Guide to the determination of the lime requirement《加石灰材料 测定石灰需求量导则》.pdf

1、DRAFT FOR DEVELOPMENTDD CEN/TS 15084:2006Liming materials Guide to the determination of the lime requirementICS 65.080g49g50g3g38g50g51g60g44g49g42g3g58g44g55g43g50g56g55g3g37g54g44g3g51g40g53g48g44g54g54g44g50g49g3g40g59g38g40g51g55g3g36g54g3g51g40g53g48g44g55g55g40g39g3g37g60g3g38g50g51g60g53g44g4

2、2g43g55g3g47g36g58Licensed Copy: Wang Bin, na, Tue Mar 27 06:45:23 GMT+00:00 2007, Uncontrolled Copy, (c) BSIDD CEN/TS 15084:2006This Draft for Development was published under the authority of the Standards Policy and Strategy Committee on 29 December 2006 BSI 2006ISBN 0 580 49802 6National foreword

3、This Draft for Development was published by BSI. It is the UK implementation of CEN/TS 15084:2006.This publication is not to be regarded as a British Standard.It is being issued in the Draft for Development series of publications and is of a provisional nature. It should be applied on this provision

4、al basis, so that information and experience of its practical application can be obtained.Comments arising from the use of this Draft for Development are requested so that UK experience can be reported to the European organization responsible for its conversion to a European standard. A review of th

5、is publication will be initiated not later than 3 years after its publication by the European organization so that a decision can be taken on its status. Notification of the start of the review period will be made in an announcement in the appropriate issue of Update Standards. According to the repl

6、ies received by the end of the review period, the responsible BSI Committee will decide whether to support the conversion into a European Standard, to extend the life of the Technical Specification or to withdraw it. Comments should be sent to the Secretary of the responsible BSI Technical Committee

7、 at British Standards House, 389 Chiswick High Road, London W4 4AL.The UK participation in its preparation was entrusted to Technical Committee CII/37, Fertilisers and related chemicals.A list of organizations represented on CII/37 can be obtained on request to its secretary.This publication does no

8、t purport to include all the necessary provisions of a contract. Users are responsible for its correct application.Amendments issued since publicationAmd. No. Date CommentsLicensed Copy: Wang Bin, na, Tue Mar 27 06:45:23 GMT+00:00 2007, Uncontrolled Copy, (c) BSITECHNICAL SPECIFICATIONSPCIFICATION T

9、ECHNIQUETECHNISCHE SPEZIFIKATIONCEN/TS 15084September 2006ICS 65.080English VersionLiming materials - Guide to the determination of the limerequirementAmendements minraux basiques - Guide pour ladtermination de la besoin en chauxCalcium-/Magnesium-Bodenverbesserungsmittel - Leitliniefr die Bestimmun

10、g des KalkbedarfsThis Technical Specification (CEN/TS) was approved by CEN on 27 May 2006 for provisional application.The period of validity of this CEN/TS is limited initially to three years. After two years the members of CEN will be requested to submit theircomments, particularly on the question

11、whether the CEN/TS can be converted into a European Standard.CEN members are required to announce the existence of this CEN/TS in the same way as for an EN and to make the CEN/TS availablepromptly at national level in an appropriate form. It is permissible to keep conflicting national standards in f

12、orce (in parallel to the CEN/TS)until the final decision about the possible conversion of the CEN/TS into an EN is reached.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, L

13、atvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMIT EUROPEN DE NORMALISATIONEUROPISCHES KOMITEE FR NORMUNGManagement Centre: rue de Stassart, 36 B-1050 Brusse

14、ls 2006 CEN All rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. CEN/TS 15084:2006: ELicensed Copy: Wang Bin, na, Tue Mar 27 06:45:23 GMT+00:00 2007, Uncontrolled Copy, (c) BSI2 Contents Page Foreword3 Introduction .4 1 Scope 5 2 Normative refer

15、ences 5 3 Terms and definitions .5 4 Classification of soils6 5 General principles7 6 Preservation liming9 7 Basal and improvement liming.10 8 Determination and calculation .11 9 Additional conditions to be considered 12 Bibliography 13 CEN/TS 15084:2006Licensed Copy: Wang Bin, na, Tue Mar 27 06:45:

16、23 GMT+00:00 2007, Uncontrolled Copy, (c) BSI3 Foreword This document (CEN/TS 15084:2006) has been prepared by Technical Committee CEN/TC 260 “Fertilizers and liming materials”, the secretariat of which is held by DIN. According to the CEN/CENELEC Internal Regulations, the national standards organiz

17、ations of the following countries are bound to announce this CEN Technical Specification: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Roman

18、ia, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. CEN/TS 15084:2006Licensed Copy: Wang Bin, na, Tue Mar 27 06:45:23 GMT+00:00 2007, Uncontrolled Copy, (c) BSI4 Introduction Regular liming for regulation of the pH value of the soil has a long tradition in agriculture. Liming

19、has a neutralizing effect on the natural acidification of the soil and thus serves the maintenance of soil fertility. The desired effects of liming are mainly: physical: Increased structure stability of the flocculation and porosity of mineral soils, leading to better drainage, structure stability o

20、f the soil and improved aeration of the soil. chemical: Positive influence on solubility of macro- and some micro-nutrients, a reduction in the availability of aluminium and other toxic elements in the soil and avoid aluminium toxicity. biological: general support of active soil organisms. Existing

21、European Standards specify methods for assessing the value of liming materials. It is also necessary to establish the principles to be used when calculating the amount of liming material required. Throughout Europe, wide national and regional variations in soil type, climate and types of farming pro

22、hibit the general use of detailed and specific recommendations. The principles set out in this standard should be used by experts at a local level to establish lime requirement. CEN/TS 15084:2006Licensed Copy: Wang Bin, na, Tue Mar 27 06:45:23 GMT+00:00 2007, Uncontrolled Copy, (c) BSI5 1 Scope This

23、 Technical Specification gives guidance on the parameters that should be taken into account in order to determine the lime requirement of agricultural soils. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only t

24、he edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 12944-3:2001, Fertilizers and liming materials Vocabulary Part 3: Terms relating to liming materials ISO 10390, Soil quality Determination of pH ISO 11259, Soil qual

25、ity Simplified soil description ISO 11277, Soil quality Determination of particle size distribution in mineral soil material Method by sieving and sedimentation ISO 14235, Soil quality Determination of organic carbon by sulfochromic oxidation 3 Terms and definitions For the purposes of this document

26、, the terms and definitions given in EN 12944-3:2001 and the following apply. 3.1 soil group texture and organic matter to describe the cultivation characteristic of the soils (light, medium or heavy soils) 3.2 rainfall water reaching the ground in the form of rain, snow and dew 3.3 pH class defined

27、 pH range as determined by ISO 10390 3.4 target pH soil pH to be achieved 3.5 basal liming increase of soil pH from very low pH value to the target pH value with liming materials 3.6 improvement liming recovery of soils from low pH value to a target pH value with liming materials 3.7 preservation li

28、ming maintaining soil pH to the defined optimum pH value with liming materials CEN/TS 15084:2006Licensed Copy: Wang Bin, na, Tue Mar 27 06:45:23 GMT+00:00 2007, Uncontrolled Copy, (c) BSI6 3.8 base saturation rate proportion of calcium, magnesium, potassium and sodium of the total cation exchange ca

29、pacity of the soil NOTE The ratio expressed as a percentage: (Ca+Mg+K+Na expressed as cmol+/kg) 100/cation exchange capacity (expressed as cmol+/kg). 3.9 crop rotation sequence of agricultural crops on a field 3.10 soil cultivation management of mechanical/physical soil treatment 3.11 lime loss annu

30、al loss and consumption of neutralizing materials from the soil 4 Classification of soils 4.1 Basic scheme Many chemical and most of the physical properties of agricultural soils depend on the clay fraction, organic matter content and pH. Therefore the clay content (fraction 5 to 12 3 heavy loamy sa

31、nd 12 to 17 4 sandy silty loam 17 to 25 5 clayey loam, clay 25 6 peat organic matter 30 % aa grain size 800 * * * should be used for determination Crops - - * * - Crop rotation system and crop removal - - * * - Cation saturation rate % 80 * * may be used for determination instead of pH Soil fineness

32、 mm 30 1 Sand pH class C kg NV/ha 5,4 to 5,8 600 5,0 to 5,4 500 4,7 to 5,1 400 4,3 to 4,7 300 - 2 Slightly loamy sand pH class C kg NV/ha 5,8 to 6,3 1 200 5,4 to 5,9 900 5,0 to 5,5 800 4,6 to 5,1 400 - 3 Heavy loamy sand pH class C kg NV/ha 6,1 to 6,7 1 400 5,6 to 6,2 1 200 5,2 to 5,8 1 000 4,8 to 5

33、,4 500 - 4 Sandy silty loam pH class C kg NV/ha 6,3 to 7,0a 1 700 5,8 to 6,5 1 500 5,4 to 6,1 1 300 5,0 to 5,7 600 - 5 Clayey loam clay pH class C kg NV/ha 6,4 to 7,2a 2 000 5,9 to 6,7 1 800 5,5 to 6,3 1 600 5,1 to 5,9 700 - 6 Peat pH class C kg NV/ha - - - - 4,3 to 4,7 300 ain the case of free carb

34、onates (free lime) no preservation liming CEN/TS 15084:2006Licensed Copy: Wang Bin, na, Tue Mar 27 06:45:23 GMT+00:00 2007, Uncontrolled Copy, (c) BSI10 Table 5 Basic scheme for the classification of pH values in soils in pH class C (targeted/optimal pH range) as well as requirement for preservation

35、 liming (kg NV/ha) Grassland Parameter Organic matter content % (mass fraction) Soil group Soil pH class pHKCl30 1 Sand pH class C kg NV/ha 4,7 to 5,2 400 4,3 to 4,7 300 2 Slightly loamy sand pH class C kg NV/ha 5,2 to 5,7 500 4,6 to 5,1 300 3 Heavy loamy sand pH class C kg NV/ha 5,4 to 6,0 600 4,8

36、to 5,4 400 4 Sandy silty loam pH class C kg NV/ha 5,6to 6,3 700 5,0 to 5,7 500 5 Clayey loam - Clay pH class C kg NV/ha 5,7 to 6,5 800 5,1 to 5,9 600 6 Peat pH class C kg NV/ha 4,3 - Table 6 Annual lime losses by neutralisation and leaching according to cultivation and rainfall in NV per hectare per

37、 year Types Rainfall mm/a Soil type Cultivation type Low 750 Light sandy soils 300 400 500 Medium loamy silty soils 400 500 600 Heavy clay soils Arable land 500 600 700 Light sandy soils 150 250 350 Medium loamy silty soils 200 300 400 Heavy clay soils Grassland 250 350 450 7 Basal and improvement l

38、iming 7.1 General Only by field experiments using local or regional soil types and under local climatic conditions, can the figures for lime requirement be accurately verified. NOTE From the farmers point of view, the determination of lime requirement must consider, not only the scientific reasons f

39、or correct soil pH, but also the economics of the subsequent liming operation. CEN/TS 15084:2006Licensed Copy: Wang Bin, na, Tue Mar 27 06:45:23 GMT+00:00 2007, Uncontrolled Copy, (c) BSI11 7.2 Source values to calculate an amount of lime 7.2.1 The initial and the target pH value of the soil Use the

40、 results of field experiments carried out over many years with the most important crops and under various climatic conditions to establish the optimum soil pH, which will give the highest financial return after taking into consideration the cost of the liming operation. The results are recorded in N

41、V per hectare. 7.2.2 The initial and the target cation saturation rate of the adsorption complex in the soil This type of calculation should be verified by field experiments. 7.2.3 Reaction of a soil sample with chemical reagents The barium acetate buffer method or ammonium acetate method are labora

42、tory analytical methods, which can be used to determine the lime requirement of agricultural soils. NOTE See Bibliography 1, 2 and 3. 7.2.4 The optimum pH range of crops or crop rotation system The position of the liming operation in the crop rotation programme is important. The special pH requireme

43、nt of single crops or the average pH requirement of a complete crop rotation shall be considered when determining the NV per hectare to be applied. 7.2.5 Buffering capacity of soils Buffering capacity of soils regarding pH shall be taken into account when determining the amount of liming material an

44、d required to reach the targeted pH. Clay content, organic matter or cation exchange capacity can provide an estimation of it. Lime requirement for basal or increase pH liming requires higher application rates in clay or organic soils, since the buffer capacity of which is higher in these soils. See

45、 also experimental approach in 7.2.3. 8 Determination and calculation The lime requirement, R, is expressed as NV per hectare or kilograms per hectare of CaO-equivalent. The amount of product required, Q, is expressed in kilograms per hectare according to the following equation: NVRQ100= (1) where R

46、 is the requirement, in kilograms per hectare, NV is the Neutralizing Value. Recommendations for lime requirement should be given by trained personnel, and be based upon the guidelines principles and parameters set out in this document. The recommendations will vary according to regional and local c

47、ircumstances. When determining lime requirement, it is particularly important to know the Neutralizing Value (NV) of the fertilizer to be applied. NV is the principal indicator of the ability of a fertilizer to neutralize acidity. CEN/TS 15084:2006Licensed Copy: Wang Bin, na, Tue Mar 27 06:45:23 GMT

48、+00:00 2007, Uncontrolled Copy, (c) BSI12 Where very high rates of liming material are recommended, they should be divided. Table 7 shows the recommended maximum annual amount of NV equivalent to be applied depending upon soil type. Table 7 Maximum amounts of NV per year Character of Soil Type Amoun

49、t of NVper ha light sandy soils 3 000 medium loamy soils 6 000 heavy clayey soils 9 000 A simplified system of lime requirement may be used when soil analysis is not possible. In that case the schedule given in Table 5 shows the guideline figures: 9 Additional conditions to be considered The application rate of liming material required for arable land generally refers to soils with a 20 cm to 30 cm depth of almost stoneless (or with very few stones) soil, and surface soils and grassland soils up to 10 cm deep. If the soil is considerably more