BS DD CEN TS 15844-2-2010 Postal services ID-tagging of letter mail items BNB-78 encoding specification《邮政服务 信件邮寄项目的ID-标签 BNB-78编码规范》.pdf

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationDD CEN/TS 15844-2:2010Postal services ID-tagging of letter mail itemsPart 2: BNB-78 Encoding SpecificationLicensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 14/06/2011 07:26,

2、 Uncontrolled Copy, (c) BSIDD CEN/TS 15844-2:2010 DRAFT FOR DEVELOPMENTNational forewordThis Draft for Development is the UK implementation ofCEN/TS 15844-2:2010.This publication is not to be regarded as a British Standard.It is being issued in the Draft for Development series of publications and is

3、 of a provisional nature. It should be applied on this pro-visional basis, so that information and experience of its practical application can be obtained.Comments arising from the use of this Draft for Development are requested so that UK experience can be reported to the international organization

4、 responsible for its conversion to an international standard. A review of this publication will be initiated not later than 3 years after its publication by the inter-national organization so that a decision can be taken on its status. Notification of the start of the review period will be made in a

5、n announcement in the appropriate issue of Update Standards.According to the replies received by the end of the review period, the responsible BSI Committee will decide whether to support the conversion into an international Standard, to extend the life of the T e c h n i c a l S p e c i f i c a t i

6、 o n o r t o w i t h d r a w i t . C o m m e n t s s h o u l d b e s e n t to the Secretary of the responsible BSI Technical Committee at British Standards House, 389 Chiswick High Road, London W4 4AL.The UK participation in its preparation was entrusted to Technical Committee SVS/4, Postal services

7、.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. BSI 2011ISBN 978 0 580 63257 0ICS 03.240Compliance with a Bri

8、tish Standard cannot confer immunity from legal obligations.This Draft for Development was published under the authority of the Standards Policy and Strategy Committee on 28 February 2011.Amendments issued since publicationDate T e x t a f f e c t e dLicensed Copy: Wang Bin, ISO/EXCHANGE CHINA STAND

9、ARDS, 14/06/2011 07:26, Uncontrolled Copy, (c) BSIDD CEN/TS 15844-2:2010TECHNICAL SPECIFICATION SPCIFICATION TECHNIQUE TECHNISCHE SPEZIFIKATION CEN/TS 15844-2 December 2010 ICS 03.240 English Version Postal services - ID-tagging of letter mail items - Part 2: BNB-78 Encoding Specification Traitement

10、 automatis des envois postaux - Chronomarquage des envois postaux - Partie 2: Spcification de codage en BNB (Bar No Bar)- 78 caractres Postalische Dienstleistungen - ID-Kennzeichnung von Briefsendungen - Teil 2: Festlegung der BNB-78-CodierungThis Technical Specification (CEN/TS) was approved by CEN

11、 on 1 December 2008 for provisional application. The period of validity of this CEN/TS is limited initially to three years. After two years the members of CEN will be requested to submit their comments, particularly on the question whether the CEN/TS can be converted into a European Standard. CEN me

12、mbers are required to announce the existence of this CEN/TS in the same way as for an EN and to make the CEN/TS available promptly at national level in an appropriate form. It is permissible to keep conflicting national standards in force (in parallel to the CEN/TS) until the final decision about th

13、e possible conversion of the CEN/TS into an EN is reached. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherl

14、ands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2010 CEN All rights of exploitation in

15、 any form and by any means reserved worldwide for CEN national Members. Ref. No. CEN/TS 15844-2:2010: ELicensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 14/06/2011 07:26, Uncontrolled Copy, (c) BSIDD CEN/TS 15844-2:2010 CEN/TS 15844-2:2010 (E) 2 Contents Page Foreword 3Introduction .41 Scope 52

16、 Normative references 53 Terms and definitions .54 Symbols and abbreviations 55 Usage limitations Requirement for a special issuer code 66 Value range limitations .67 Encoding specification .77.1 Data to be encoded 77.2 Data field encoding table 97.3 Calculation of the error detection and correction

17、 bits 107.4 ECC field encoding table . 117.5 Construction of the bar code to be printed on the item . 128 Printing of the bar code . 138.1 Optical characteristics of the ink 138.2 Bar code characteristics 149 Reading and interpretation of BNB-78 bar codes . 169.1 Discrimination from other bar codes

18、169.2 Fully read bar codes . 169.3 Partially read bar codes . 169.4 Checking data field values . 169.5 Manual interpretation of bar codes . 1710 Conversion to the message and binary representations . 17Annex A (informative) Error detection and correction algorithms 19A.1 Introduction . 19A.2 Calcula

19、tion of error control groups 19A.3 Checking the read value for errors . 19A.4 Correcting an erroneous bar code 20A.5 Pre-processing 21Annex B (informative) S18 ID-tag 78-position BNB bar code template 23Bibliography . 25Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 14/06/2011 07:26, Uncontr

20、olled Copy, (c) BSIDD CEN/TS 15844-2:2010 CEN/TS 15844-2:2010 (E) 3 Foreword This document (CEN/TS 15844-2:2010) has been prepared by Technical Committee CEN/TC 331 “Postal services”, the secretariat of which is held by NEN. Attention is drawn to the possibility that some of the elements of this doc

21、ument may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. NOTE This document has been prepared by experts coming from CEN/TC 331 and UPU, under the framework of the Memorandum of Understanding between the UPU and CEN. T

22、his document (CEN/TS 15844-2), is the CEN equivalent of UPU 1)standard S18b-7. It may be amended only after prior consultation, between CEN/TC 331 and the UPU Standards Board, in accordance with the Memorandum of Understanding between CEN and the UPU. The UPUs contribution to the document was made,

23、by the UPU Standards Board 2)and its sub-groups, in accordance with the rules given in Part V of the “General information on UPU standards“. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to announce this Technical Specifi

24、cation: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the Unit

25、ed Kingdom. 1)The Universal Postal Union (UPU) is the specialized institution of the United Nations that regulates the universal postal service. The postal services of its 189 member countries form the largest physical distribution network in the world. Some 5 million postal employees working in ove

26、r 660 000 post offices all over the world handle an annual total of 425 billion letters-post items in the domestic service and almost 6,7 billion in the international service. Some 4,5 billion parcels are sent by post annually. Keeping pace with the changing communications market, posts are increasi

27、ngly using new communication and information technologies to move beyond what is traditionally regarded as their core postal business. They are meeting higher customer expectations with an expanded range of products and value-added services.2)The UPUs Standards Board develops and maintains a growing

28、 number of standards to improve the exchange of postal-related information between posts, and promotes the compatibility of UPU and international postal initiatives. It works closely with posts, customers, suppliers and other partners, including various international organizations. The Standards Boa

29、rd ensures that coherent standards are developed in areas such as electronic data interchange (EDI), mail encoding, postal forms and meters. UPU standards are published in accordance with the rules given in Part VII of the General information on UPU standards, which may be freely downloaded from the

30、 UPU world-wide web site (www.upu.int).Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 14/06/2011 07:26, Uncontrolled Copy, (c) BSI4 Introduction A general introduction to all parts of the specification is provided in CEN/TS 15844-1. This part deals only with the encoding of ID-tags in the fo

31、rm of a 78-position bar-no-bar code, BNB-78, printed on the reverse side of items, in area R1, using fluorescent ink. It is arranged under six main headings: Clause No. Description of content 5 Usage limitations requirement for a special issuer code: explains the requirement for issuers wishing to u

32、se the BNB-78 ID-tag representation to obtain a special issuer code for this purpose; 6 Value range limitations: defines limitations on the values of data elements used in ID-tags which are to be represented on items in the form of a BNB-78 bar code; 7 Encoding specification: specifies the construct

33、ion of a 78-position bar-no-bar code from ID-tag data elements; 8 Printing of the bar code: to allow the association of computer data with a physical item, the ID-tag is printed on the item itself. This clause defines required ink and printing parameters; 9 Reading and interpretation of BNB-78 bar c

34、odes: specifies the validation and error correction requirements associated with the reading of ID-tags represented using BNB-78 bar codes; 10 Conversion to the message and binary representations: describes the correspondence between BNB-78 representation and the binary and message interchange repre

35、sentations defined in CEN/TS 15844-1. The above definition is supported by two informative annexes: Error detection and correction algorithms: provides example implementations of the error detection and correc-tion algorithms used in encoding and reading the BNB-78 representation of the ID-tag. Othe

36、r implementations are possible and, depending on the environment, might well be more efficient. The examples nevertheless serve as a possible baseline, and can be used for verifying the correctness of a different implementation. S18 ID-tag 78-position BNB bar code template: provides a template which

37、 can be used for manual decoding of the data elements in printed BNB-78 representations of an ID-tag. Such manual decoding should be used with caution since, unless the complete bar code is read and processed through the appropriate error detection/correction algorithm, there is no certainty that th

38、e value obtained has been read correctly. DD CEN/TS 15844-2:2010CEN/TS 15844-2:2010 (E) Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 14/06/2011 07:26, Uncontrolled Copy, (c) BSI5 1 Scope This part of the Technical Specification defines the representation of ID-tags as a 78-position bar-no-

39、bar code (BNB-78) printed in fluorescent ink in area R1 on the reverse side of items. BNB-78 encoding is one of two encoding specifications supported by this Technical Specification 3) for the printing of ID-tags in area R1, the other being BNB-62, which is specified in CEN/TS 15844-3. NOTE 1 Repres

40、entation in the form of a 4-state code printed on the front of the item is covered in CEN/TS 15844-4 for flats and CEN/TS 15844-5 for small letters. BNB-78 encoding supersedes the earlier specified BNB-62 encoding and shall be applied in all cases in which ID-tags are placed in area R1 on the revers

41、e side of letter mail items of size up to and including C5, by issuers other than those explicitly authorised to continue use of BNB-62 encoding, namely An Post (Ireland), Canada Post and United States Postal Service. NOTE 2 ID-tags encoded in area R1 are required by article RL 123 of the UPU Letter

42、 Post Regulations 1 to be compliant with UPU standard S18 and by this with the related CEN/TS 15844. This supports only two encodings in area R1, namely BNB-78 as defined herein and BNB-62 as defined in CEN/TS 15844-3. The latter is authorised for continued use only by the three issuers mentioned ab

43、ove. Where ID-tags are used, and are applied in area R1 on the reverse side of letter mail items of size up to and including C5, the use of BNB-78 encoding is mandatory for all other issuers. NOTE 3 BNB-78 encoding is not considered suitable for use on flats. CEN/TS 15844-4 defines a 4-state encodin

44、g which may be used for this purpose. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendment

45、s) applies. CEN/TS 15844-1:2010, Postal services ID-tagging of letter mail items Part 1: ID-tag structure, message and binary 3 Terms and definitions A number of common terms used in this document are defined in documents referred to in Normative References and in the Bibliography. Definition of fre

46、quently used or particularly important terms as well as other terms introduced in this document are given below. See CEN/TS 15844-1:2010, Postal services ID-tagging of letter mail items Part 1: ID-tag structure, message and binary 4 Symbols and abbreviations See CEN/TS 15844-1:2010, Postal services

47、ID-tagging of letter mail items Part 1: ID-tag structure, message and binary 3)References to “this Technical Specification“ should be interpreted as references to CEN/TS 15844 as a whole, not only to Part 2. DD CEN/TS 15844-2:2010CEN/TS 15844-2:2010 (E) Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA ST

48、ANDARDS, 14/06/2011 07:26, Uncontrolled Copy, (c) BSI6 5 Usage limitations Requirement for a special issuer code The allocation of ID-tags and their application to items using BNB-78 representation is restricted to issuers to whom an issuer code in the range NNN, , ZZZ has been assigned. Issuers wis

49、hing to commence use of the ID-tag should request the UPU Standards Board secretariat to issue them with such a code at least three months prior to the planned implementation date. NOTE 1 There are no constraints on the reading and use of ID-tags. Any mail handling organisation with appropriate reading equipment may read ID-tags on items and use these for their intended purposes. However, the allocation of ID-tags and their encoding on items is restricted to licensed issuers which hav