BS DD ENV 14062-2-2001 Identification card systems - Surface transport applications - Electronic fee collection - Message requirements《识别卡系统 表面运输应用 电子收费 电文要求》.pdf

1、DRAFT FOR DEVELOPMENT DD ENV 14062-2:2001 Identification card systems Surface transport applications Electronic fee collection Part 2: Message requirements ICS 35.240.15 NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWDD ENV 14062-2:2001 This Draft for Development, having been

2、prepared under the direction of the DISC Board, was published under the authority of the Standards Committee and comes into effect on 15 September 2001 BSI 07-2001 ISBN 0 580 38291-5 National foreword This Draft for Development is the English language version of ENV 14062-2:2001. This publication is

3、 not to be regarded as a British Standard. It is being issued in the Draft for Development series of publications and is of a provisional nature because there are no agreed interoperable fee collection systems yet. It should be applied on this provisional basis, so that information and experience of

4、 its practical application may be obtained. Comments arising from the use if this Draft for Development are requested so that UK experience can be reported to the European organization responsible for its conversion into a European Standard. A review of this publication will be initiated 2 years aft

5、er its publication by the European organization so that a decision can be taken on its status at the end of its three-year life. The commencement of the review period will be notified by an announcement in Update Standards. According to the replies received by the end of the review period, the respo

6、nsible BSI Committee will decide whether to support the conversion into a European Standard, to extend the life of the prestandard or to withdraw it. Comments should be sent in writing to the Secretary of BSI Technical Committee IST/17, Cards and Personal Identification, at 389 Chiswick High Road, L

7、ondon W4 4AL, giving the document reference and clause number and proposing, where possible, an appropriate revision of the text. A list of organizations represented on this committee can be obtained on request to its secretary. Cross-references The British Standards which implement international or

8、 European publications referred to in this document may be found in the BSI Standards Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Find” facility of the BSI Standards Electronic Catalogue. Summary of pages This document comprises a front cover

9、, an inside front cover, the ENV title page, pages 2 to 12, an inside back cover and a back cover. The BSI copyright date displayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No. Date CommentsEUROPEANPRESTANDARD PRNORMEEUROPENNE EUROPISCHEV

10、ORNORM ENV140622 June2001 ICS35.240.15 Englishversion IdentificationcardsystemsSurfacetransportapplications ElectronicfeecollectionPart2:Messagerequirements ThisEuropeanPrestandard(ENV)wasapprovedbyCENon10May2001asaprospectivestandardforprovisionalapplication. TheperiodofvalidityofthisENVislimitedin

11、itiallytothreeyears.AftertwoyearsthemembersofCENwillberequestedto submittheir comments,particularlyonthequestionwhethertheENVcanbeconvertedintoaEuropeanStandard. CENmembersarerequiredtoannouncetheexistenceofthisENVinthesamewayasforanENandtomaketheENVavailablepromp tly atnationallevelinanappropriatef

12、orm.Itispermissibletokeepconflictingnationalstandardsinforce(inparalleltothe ENV)untilthefinal decisionaboutthepossibleconversionoftheENVintoanENisreached. CENmembersarethenationalstandardsbodiesofAustria,Belgium,CzechRepublic,Denmark,Finland,France,Germany,Greece, Iceland,Ireland,Italy,Luxembourg,N

13、etherlands,Norway,Portugal,Spain,Sweden,SwitzerlandandUnitedKingdom. EUROPEANCOMMITTEEFORSTANDARDIZATION COMITEUROPENDENORMALISATION EUROPISCHESKOMITEEFRNORMUNG ManagementCentre:ruedeStassart,36B1050Brussels 2001CEN Allrightsofexploitationinanyformandbyanymeansreserved worldwideforCENnationalMembers

14、. Ref.No.ENV140622:2001EPage2 ENV140622:2001 Contents Foreword3 Introduction .4 1 Scope 5 2 Normativereferences 5 3 Termsanddefinitions. .6 4 Abbreviations .6 5 EFCusingDSRC 7 5.1 Messagerequirements 7 5.1.1 General7 5.1.2 APDUrequirements . 7 5.1.3 Commandset . 7 5.2 Applicationlayerrequirements 10

15、 5.2.1 Filesystem. .10 5.2.2 Filereferencing 11 5.2.3 Datareferencingmethods .11 6 EFCusingGSM . .11 Bibliography 12Page3 ENV140622:2001 Foreword ThisEuropeanPrestandardhasbeenpreparedbyTechnicalCommitteeCEN/TC224,“Machinereadablecards, relateddeviceinterfacesandoperations“thesecretariatofwhichishel

16、dbyAFNOR. ThisEuropeanPrestandardcomprisesthefollowingparts,underthegeneraltitle“Identificationcardsystems SurfacetransportapplicationsElectronicfeecollection”: Part1:Physicalcharacteristics,electronicsignalsandtransmissionprotocols Part2:Messagerequirements Part3:Applicationandsecurityaspects Part4

17、:Testprocedures AccordingtotheCEN/CENELECInternalRegulations,thenationalstandardsorganizationsofthefollowing countriesareboundtoannouncethisEuropeanPrestandard:Austria,Belgium,CzechRepublic,Denmark,Finland, France,Germany,Greece,Iceland,Ireland,Italy,Luxembourg,Netherlands,Norway,Portugal,Spain,Swed

18、en, SwitzerlandandtheUnitedKingdom.Page4 ENV140622:2001 Introduction ThisEuropeanPrestandardisoneofaseriesofStandardsdescribingthecharacteristicsofICcardsusedin ElectronicFeeCollection(EFC)systemsbasedon theDedicatedShortRangeCommunication(DSRC);and theGlobalSystemforMobileCommunication(GSM); andthe

19、characteristicsoftheinterfacebetweenthoseICcardsandtherelatedcardinterfacedevicesinstalledin vehicles,socalledOnBoardUnits. Itisnotenvisagedthatthecompletesetoffunctionsanddatastructuresdescribedhereinispresentineachpiece ofEFCequipment,beitOBUorICC.Thus,noteverycommandorfiletypehastobepresentinanOB

20、UoranICC inorderforittobecompliantwiththisEuropeanPrestandard.Page5 ENV140622:2001 1Scope ThisEuropeanPrestandardspecifiesdirectlyorbyreferencethemessagerequirementsforintegratedcircuit(s) cards(ICCs)carryingtheEFCapplicationandrelatedrequirementsforOnBoardUnits(OBUs)usedinElectronic FeeCollectionsy

21、stemsbasedonDedicatedShortRangeCommunicationandGlobalSystemforMobile Communication,withthetargettoprovidebasicinteroperabilitybetweenanICCandanOBUindependentlyofthe respectivemanufacturersandoperators.Ittakesintoconsiderationbothenvironmentalandsystemrelatedaspects andstatesminimumrequirementsofconf

22、ormity. TherequirementsimposedbythisPrestandardapplyto theICcarditself,denotedbytheabbreviationICC; theinvehiclecardinterfacedevice,denotedbytheabbreviationOBU;or thecombinationofboth. ThisPrestandarddoesnotdirectlysetrequirementsonanyothercardinterfacedevice(IFD)besidestheOBUe.g. stationarydevices.

23、However,therequirementsimposedontheICcardmayinducetechnicalconsequencesforan IFDdesignedtoacceptanICcardusedinEFCapplications. ItspecifiestherespectivecharacteristicsoftheICCandOBUonlyasfarasthesemayconcerntheinterface,but doesnotgiveanyinternaltechnicalimplementation. 2 Normativereferences ThisEuro

24、peanPrestandardincorporatesbydatedorundatedreference,provisionsfromotherpublications.These normativereferencesarecitedattheappropriateplacesinthetextandthepublicationsarelistedhereafter.For datedreferences,subsequentamendmentstoorrevisionsofanyofthesepublicationsapplytothisEuropean Prestandardonlywh

25、enincorporatedinitbyamendmentorrevision.Forundatedreferencesthelatesteditionofthe publicationreferredtoapplies(includingamendments). EN7263:1994, IdentificationcardsystemsTelecommunicationsintegratedcircuit(s)cardsandterminals Part3:Applicationindependentcardrequirements. ENV15451:1998, Identificati

26、oncardsystemsSurfacetransportapplicationsPart1:Generaldataelements. ENV15452:1998, IdentificationcardsystemsSurfacetransportapplicationsPart2:Transportpaymentrelated dataelements. ENVISO14906:1998, Roadtransportandtraffictelematics(RTTT)ElectronicFeeCollection(EFC)Application interfacedefinitionford

27、edicatedshortrangecommunications(ISO/TR14906:1 998). ETS300699, Europeandigitalcellulartelecommunicationssystem(Phase2+)SpecificationoftheSubscriber IdentityModuleMobileEquipment(SIMME)interface(GSM11.11V5.5.0). ISO/IEC78163:1997, IdentificationcardsIntegratedcircuit(s)cardswithcontactsPart3:Electro

28、nicsignals andtransmissionprotocols. ISO/IEC78164:1995, IdentificationcardsIntegratedcircuit(s)cardswithcontactsPart 4 :Interindustry commandsforinterchange. ISO/IEC78165:1994, IdentificationcardsIntegratedcircuit(s)cardswithcontactsPart5:Numberingsystem andregistrationprocedureforapplicationidentif

29、iers.Page6 ENV140622:2001 3 Termsanddefinitions ForthepurposesofthisEuropeanPrestandard,thefollowingtermsanddefinitionsapply. 3.1 ICcard,ICC anintegratedcircuit(s)cardusedinEFCapplications 3.2 interfacedevice,IFD anyinterfacedeviceforeseentoacceptanICcardusedinEFCapplications 3.3 onboardunit,OBU inv

30、ehicle,cardinterfacedevice,containingDRSCorGSMcommunicationequipment,enablingdirectorindirect communicationbetweenanICcardandaroadsidebeaconorbetweenanICcardandtheGSMnetwork 4Abbreviations ForthepurposeofthisEuropeanPrestandard,thefollowingabbreviationsapplythroughoutthedocumentunless otherwisespeci

31、fied: EFC ElectronicFeeCollection AID ApplicationIdentifier,asdefinedinISO/IEC78165:1994 APDU ApplicationProtocolDataUnit,accordingtoISO/IEC78164:1995 CLA Classbyte,asdefinedinISO/IEC78164:1995 DF DedicatedFile,asdefinedinISO/IEC78164:1995 DSRC DedicatedShortRangeCommunication EF ElementaryFile,asde

32、finedinISO/IEC78164:1995 ICC SeeDefinitionsabove IFD SeeDefinitionsabove INS Instructionbyte,asdefinedinISO/IEC78164:1995 L c Lengthofcommand,asdefinedinISO/IEC78164:1995 L e Lengthofexpectedresponse,asdefinedinISO/IEC78164:1995 LEN Lengthfield LRC LongitudinalRedundancyCheck,asdefinedinISO/IEC78163

33、:1997 MF MasterFile,asdefinedinISO/IEC78164:1995 OBU SeeDefinitionsabove P1 Parameterbyte1,asdefinedinISO/IEC78164:1995 P2 Parameterbyte2,asdefinedinISO/IEC78164:1995 RSE RoadsideEquipmentPage7 ENV140622:2001 SFI ShortFileIdentifier,asdefinedinISO/IEC78164:1995 SW1 StatusWord1,asdefinedinISO/IEC7816

34、4:1995 SW2 StatusWord2,asdefinedinISO/IEC78164:1995 TPDU TransportProtocolDataUnit,accordingtoISO/IEC78163:1997 5 EFCusingDSRC 5.1Message requirements Thisclausedescribesthebasicmessagerequirements,i.e.thesetofcommandsandthedatacodingscheme. 5.1.1General TheOBUshallnotusetheindicationL e =00 16 forr

35、equestingthattheICCreplywithallavailabledata. NOTE ThereasonisthattheOBUwillalwaysknowthesizeofthedatarequested. 5.1.2APDU requirements 5.1.2.1 LengthofAPDU TheOBUneednotallowuseoftheextendedlengthfieldsforthelengthL c ofthedatafieldofaCommandAPDU andfortheexpectedlengthL e oftheresponseAPDU. NOTE1

36、ThereasonisthatthelengthoftheLLCframeofDSRCislimitedtoatmost128bytes. NOTE2 Clause5.3ofISO/IEC78164:1995allowsfortheshort(1byte)aswellastheextended(3bytes)lengthfields. 5.1.2.2 MappingofAPDUsontoTPDUs TheAPDUsofISO/IEC78164shallbemappeduponTPDUsforT=0asdescribedinISO/IEC78164:1995, annexAwiththerest

37、rictionslistedinpart1,clause5.3.6. TheAPDUsofISO/IEC78164shallbemappeduponTPDUsforT=1asdescribedinISO/IEC78164:1995, annexBwiththerestrictionslistedinpart1,clause5.3.5. 5.1.3Command set Thefollowingcommandsshallasaminimumbeavailableforthepurposeofcarryingoutdataexchangebetween anOBUandanICCduringanE

38、FCtransaction.Thelistingsarebasedontherestrictionsmentionedinclause5.2 below,regardingaddressing. TheCLAbyteshallbeequaltozeroforallinterindustrycommands.Theformatofthecommands,whenusedin securemessaging,isdescribedinpart3ofthisstandardsseries. 5.1.3.1Command overview TheOBUandtheICCshallsupportthef

39、ollowingsubsetofcommandsasdefinedinISO/IEC78164:1995: readbinaryISO/IEC78164:1995,clause6.1; selectfileISO/IEC78164:1995,clause6.11; getresponseISO/IEC78164:1995,clause7.1.Page8 ENV140622:2001 TheOBUmaysupporttheTransferChannelcommandspecifiedinENV ISO 14906:1998,whichisaRSE command,whenadditionalco

40、mmandsfrome.g.ISO/IEC78164:1995,EN7263:1994andtheEMVspecification shallbeused. 5.1.3.2 Effectofthetransferchannelcommandonthecardinterface IftheOBUsupportsTransferChannelcommandsaccordingtoENVISO14906:1998,thecommandsshallbe processedinthefollowingway: IftheAPDUoftheActionParameteroroftheResponsePar

41、ameterisempty,itshallberepresentedbyalength determinanthavingthevalue00 16 .TheAPDUpartoftheActionParametershallbetreatedasanOCTETSTRING inaccordancewithENVISO14906:1998.ThelengthdeterminantshallberemovedbytheOBU.Theremaining partshallbetreatedasacommandAPDU,definedinISO/IEC78164:1995. Iftheprotocol

42、T=0isused,thecommandAPDUsofISO/IEC78164:1995shallbemappeduponcommand TPDUsforT=0asdescribedinclause5.1.2.2MappingofAPDUsontoTPDUs. IftheprotocolT=1isused,thecommandAPDUsofISO/IEC78164:1995shallbemappeduponcommand TPDUsforT=1asdescribedinclause5.1.2.2MappingofAPDUsontoTPDUs. IftheprotocolT=0isusedand

43、acommandresultsinthestatusbytesSW1SW2=61XX 16 ,theOBUshallissuea Get_ResponsecommandforretrievingtheremainingXX 16 bytesofdatafromtheICC.Itshallnotbenecessaryto usetheTransfer_Channelcommandforthis.ThestatusbytesSW1SW2=61XX 16 shallnotbeincludedinthe Transfer_Channelresponse. IftheprotocolT=0isused,theresponseTPDUsofISO/IEC78164:1995shallbemappeduponResponse APDUsforT=0asdescribedinclause5.1.2.2MappingofAPDUsontoTPDUs. IftheprotocolT=1isused,theresponseTPDUsofISO/IEC78164:1995shallbemappeduponResponse APDUsforT=1asdescribedinclause5.1.2.2MappingofAPDUsontoTPDUs. TheResponseAPDUshallb