1、BRITISH STANDARD BS EN 1015-1:1999 Incorporating amendment no. 1 Methods of test for mortar for masonry Part 1: Determination of particle size distribution (by sieve analysis) The European Standard EN 1015-1:1998, incorporating amendment A1:2006, has the status of a British Standard ICS 91 100.10 BS
2、 EN 1015-1:1999 This British Standard, having been prepared under the direction of the Sector Committee for Building and Civil Engineering, was published under the authority of the Standards Committee and comes into effect on 15 February 1999 BSI 2007 ISBN 0 580 30744 1 National foreword This Britis
3、h Standard was published by BSI. It is the UK implementation of EN 1015-1:1998, incorporating amendment A1:2006. It is included in a package of standards that supersedes BS 4551-1, Methods of testing mortars, screeds and plasters Part 1: Physical testing, which is withdrawn. The start and finish of
4、text introduced or altered by amendment is indicated in the text by tags !“. Tags indicating changes to CEN text carry the number of the CEN amendment. For example, text altered by CEN amendment A1 is indicated by !“. The UK participation in its preparation was entrusted by Technical Committee B/519
5、, Masonry and associated testing, to Subcommittee B/519/2, Mortar. A list of organizations represented on this subcommittee can be obtained on request to its secretary. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct appl
6、ication. Compliance with a British Standard cannot confer immunity from legal obligations. Amendments issued since publication Amd. No. Date Comments 16884 31 January 2007 See national forewordCEN European Committee for Standardization Comite Europe en de Normalisation Europa isches Komitee fu r Nor
7、mung Central Secretariat: rue de Stassart 36, B-1050 Brussels 1998 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 1015-1:1998 E EUROPEAN STANDARD EN 1015-1 NORME EUROPE ENNE EUROPA ISCHE NORM October 1998 ICS 91.100.10 Descriptors
8、: masonry work, mortars: materials, tests, determination, particle size, grain structure, sieving English version Methods of test for mortar for masonry Part 1: Determination of particle size distribution (by sieve analysis) Me thodes dessai des mortiers pour mac onnerie Partie 1: De termination de
9、la re partition granulome trique (par tamisage) Pru fverfahren fu rM o rtel fu r Mauerwerk Teil 1: Bestimmung der Korngro enverteilung (durch Siebanalyse) This European Standard was approved by CEN on 4 September 1998. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which s
10、tipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member. This European Standar
11、d exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions. CEN members are the national standar
12、ds bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom. + A1 December 2006Page 2 EN 1015-1:1998 Foreword This European Standard has been prepared by Te
13、chnical Committee CEN/TC 125, Masonry, the Secretariat of which is held by BSI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by April 1999, and conflicting national standards shall be withdrawn at
14、 the latest by September 2000. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxem
15、bourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the United Kingdom. Contents Page Foreword 2 1 Scope 3 2 Normative references 3 3 Principle 3 4 Symbols 3 5 Apparatus 3 6 Preparation and storage of test samples from the bulk test sample 3 7 Procedure 4 8 Calculation and expressio
16、n of results 4 9 Test report 4 Annex A (informative) Bibliography 5 Foreword to amendment A1 This document (EN 1015-1:1998/A1:2006) has been prepared by Technical Committee CEN/TC 125 “Masonry”, the secretariat of which is held by BSI. This Amendment to the European Standard EN 1015-1:1998 shall be
17、given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by June 2007, and conflicting national standards shall be withdrawn at the latest by June 2007. According to the CEN/CENELEC Internal Regulations, the national standards organizations
18、 of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, S
19、lovenia, Spain, Sweden, Switzerland and United Kingdom. BSI 2007Page 3 EN 1015-1:1998 1 Scope This European Standard specifies two methods of determining the particle size distribution of dry mixed or non-hardened wet mixed mortars. The method of wet sieving is applicable to mortars containing norma
20、l weight aggregates and the method of dry sieving to mortars containing lightweight aggregates. This European Standard does not cover particle size distribution of separate aggregates, which should be determined in accordance with the test method described in European Standard EN 933, nor does it co
21、ver mixes containing fibres which cannot be removed before sieving. 2 Normative references 998-1, Specification for mortar for masonry Part 1: Rendering and plastering mortar with inorganic binding agents. 998-2, Specification for mortar for masonry Part 2: Masonry mortar. EN 1015-2, Methods of test
22、 for mortar for masonry Part 2: Bulk sampling of mortars and preparation of test mortars. 3 Principle A series of test sieves (5.2) with increasing aperture size are nested on top of one another on a bottom pan. The sample is placed on the top sieve and the stack of sieves is then agitated until fur
23、ther agitation causes no change in the mass retained on each sieve, which is weighed. NOTE For samples with particles of different densities the sieve analysis will only give the particle size distribution in % of total mass. 4 Symbols m r is the mass of the fraction retained on the sieve (g); A is
24、the area of the sieve (mm 2 ); d is the nominal aperture size of the sieve (mm); d max is the maximum aggregate size of the sample in (mm). 5 Apparatus 5.1 Weighing instrument, with a capacity of 1 kg capable of weighing to an accuracy of 0,1 g. 5.2 Test sieves, with square apertures, conforming to
25、Table 1. NOTE For aperture sizes of 4,00 mm and above perforated plate sieves are recommended. Table 1 Test sieve aperture sizes Aperture sizes mm 8,00 4,00 2,00 1,00 0,500 0,250 0,125 0,063 5.3 Mechanical sieve shaker. 5.4 Well fitting pan and lid, for the sieves. 5.5 Shallow trays, made of corrosi
26、on-resistant metal, approximately 200 mm in diameter and 50 mm in height. 5.6 Containers, suitable for holding fresh mortar samples to which water can be added for the creation of a suspension. 5.7 A ventilated oven, capable of maintaining temperatures of 1058C 58C and 608C 58C respectively. 6 Prepa
27、ration and storage of test samples from the bulk test sample The bulk test sample taken in accordance with EN 1015-2 shall be reduced using a sample divider or by quartering, and shall yield a test sample of mass larger than the minimum, but not of an exact predetermined value. The minimum dry mass
28、of the test sample shall be as follows: 0,2 kg for d max # 4 mm; 0,6 kg for d max 4 mm. Mortars containing particles passing aperture size 0,125 mm may be wetted before reduction to minimize segregation and loss of dust. If the sample contains hydraulic binders, the following preparation under wet c
29、onditions shall be executed as quickly as possible. If dry sieving is required, the wetting of mortars containing hydraulic binders shall be omitted. If the material to be sieved contains fibres, these shall be removed prior to sieving and be considered as not belonging to the material to be sieved.
30、 Their proportion and type shall be recorded and described. If removal is not possible, then sieving in accordance with this European Standard is not applicable.EN EN! “ “ ! BSI 2007 !The following referenced documents are indispensable for the application of this document. For dated references, onl
31、y the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. “ Page 4 EN 1015-1:1998 1) This information is contained in the certificate of sampling (see EN 1015-2). 7 Procedure 7.1 General NOTE Mortars containing lightweight
32、or organic aggregates may become statically charged by the motion of the material on the sieve, resulting in agglomeration, or sticking to the sieve base. Should such a phenomenon occur, suitable measures should be taken. 7.2 Wet sieving Place the test sample in a container (5.6) and cover it with w
33、ater. Mix the suspension up quickly, and pour it with the wash water on the nested sieves (5.2). Carry out sieving with the aid of a water jet until the wash water remains clean. Remove the fraction retained on each sieve and from the pan and spread each fraction in a thin layer into separate shallo
34、w trays (5.5). Dry each in the oven at a temperature of 1058C 58C. Continue the drying process until two consecutive weighings of each fraction at 2 h intervals do not differ by more than 0,2 g. 7.3 Dry sieving Spread the sample in a thin layer in shallow trays (5.5) and dry in the oven (5.7) at a t
35、emperature of 1058C 58C. For samples with organic constituents, e.g. expanded polystyrene aggregate or exfoliated vermiculite, use a drying temperature of 608C 58C. Continue the drying process until two consecutive weighings of the sample at 2 h intervals do not differ by more than 0,2 g. Place the
36、dried sample on the nested sieves and carry out sieving until it is ascertained that less than 0,2 % of the total sample mass will pass any individual sieve during continuous hand sieving for 1 min. Do not force any material through the sieve. 7.4 Weighing Determine the mass of each fraction (m r )
37、retained on the individual sieves and sum them to give the mass of the total sample. The difference between the total and the sample weight is the amount of fine particles. On sieves with apertures smaller than 4,00 mm, the mass of each fraction retained at the end of the sieving operation shall not
38、 exceed: m r = A d 200 If any of the mass fractions retained exceeds this amount, use one of the two following procedures: a) divide the fraction into portions smaller than the specified maximum and sieve these one after the other; or b) divide the portion of the sample passing the 4,00 mm sieve wit
39、h the aid of a sample divider or by quartering, and continue the sieve analysis on the reduced sample. 8 Calculation and expression of results Calculate the individual fractions, as percentages of the total mass of the sample, and calculate the total percentage of material passing each sieve. If a d
40、ividing operation as described in 7.4 was performed, take this into account in the calculation. 9 Test report The test report shall include the following information: a) the number, title and date of issue of this European Standard; b) the place, date and time of taking the bulk test sample 1) ; NOT
41、E This is the sample taken from the bulk supply that is to be used for all of the tests in EN 1015. c) the method used for taking the bulk test sample (if known) and the name of the organization that took it; d) the date and time of testing; e) the type, origin and designation of the mortar by refer
42、ence to the relevant part of 998; f) the total mass of each individual test sample; g) the method of sieving (dry or wet); h) the percentage of the mass of the total sample retained on each sieve, but passing the next larger sieve, and/or the cumulative percentage of the mass of the total sample pas
43、sing each of the sieves, to the nearest 1 % and, if required, a graphical presentation of the results; i) remarks, if any. EN ! “ BSI 2007 !Mortars shall be tested by dry sieving unless it is anticipated that they may contain agglomerates, when wet sieving shall be used. “ Page 5 EN 1015-1:1998 Anne
44、x A (informative) Bibliography The following informative reference is made in this standard: EN 933, Tests for geometrical properties of aggregates (multi-part standard in preparation in CEN/TC 154). BSI 2007BS EN 1015-1:1999 BSI 389 Chiswick High Road London W4 4AL BSI British Standards Institution
45、 BSI is the independent national body responsible for preparing British Standards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter. Revisions British Standards are updated by amendment or revision. Users of British Standards should m
46、ake sure that they possess the latest amendments or editions. It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical committee r
47、esponsible, the identity of which can be found on the inside front cover. Tel: +44 (0)20 8996 9000. Fax: +44 (0)20 8996 7400. BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards. Buying standards Orders f
48、or all BSI, international and foreign standards publications should be addressed to Customer Services. Tel: +44 (0)20 8996 9001. Fax: +44 (0)20 8996 7001. Email: ordersbsi-. Standards are also available from the BSI website at http:/www.bsi-. In response to orders for international standards, it is
49、BSI policy to supply the BSI implementation of those that have been published as British Standards, unless otherwise requested. Information on standards BSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give details on all its product
copyright@ 2008-2019 麦多课文库（www.mydoc123.com）网站版权所有
备案/许可证编号：苏ICP备17064731号-1