BS EN 1034-17-2012 Safety of machinery Safety requirements for the design and construction of paper making and finishing machines Tissue making machines《机械安全 造纸机和修整机的设计与建造安全要求 纸巾制造.pdf

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationBS EN 1034-17:2012Safety of machinery Safetyrequirements for the designand construction of papermaking and finishing machinesPart 17: Tissue making machinesBS EN 1034-17:2012 BRI

2、TISH STANDARDNational forewordThis British Standard is the UK implementation of EN 1034-17:2012.The UK participation in its preparation was entrusted to TechnicalCommittee MCE/3/9, Paper and printing machines - Safety.A list of organizations represented on this committee can beobtained on request to

3、 its secretary.This publication does not purport to include all the necessaryprovisions of a contract. Users are responsible for its correctapplication. The British Standards Institution 2012. Published by BSI StandardsLimited 2012ISBN 978 0 580 74704 5ICS 85.100Compliance with a British Standard ca

4、nnot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 31 August 2012.Amendments issued since publicationDate Text affectedBS EN 1034-17:2012EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 1034-17 Augus

5、t 2012 ICS 85.100 English Version Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 17: Tissue making machines Scurit des machines - Prescriptions de scurit pour la conception et la construction de machines de fabrication et de fi

6、nition du papier - Partie 17: Machines de fabrication du papier non tiss Sicherheit von Maschinen - Sicherheitstechnische Anforderungen an Konstruktion und Bau von Maschinen der Papierherstellung und Ausrstung - Teil 17: Tissuemaschinen This European Standard was approved by CEN on 13 July 2012. CEN

7、 members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on appl

8、ication to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Ma

9、nagement Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Lat

10、via, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-10

11、00 Brussels 2012 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 1034-17:2012: EBS EN 1034-17:2012EN 1034-17:2012 (E) 2 Contents Page Foreword 4Introduction . 61 Scope 72 Normative references 73 Terms and definitions . 104 List of

12、significant hazards 155 Safety requirements and/or measures 175.1 General 175.2 Workplaces, means of access, walkways, passageways 185.3 Start-up warning device 185.4 Emergency stop device and braking system 195.5 Isolation and energy dissipation, prevention of unexpected start-up . 205.6 Electric d

13、rive system and power transmission elements 205.7 Control system and actuators 215.8 Electrical equipment 225.9 Hydraulic equipment . 225.10 Pneumatic equipment . 225.11 Equipment and measures for make-ready, maintenance and lubrication . 225.12 Equipment and measures for cleaning and removal of bro

14、ke 235.13 Noise . 245.14 Hot surfaces . 255.15 Integrated lighting 255.16 Ergonomic principles 255.17 Paper dust, health hazards and explosive atmospheres and zones 255.18 Chemical substances 265.19 Fire 265.20 Rolls, outer rolls. 275.21 Water jet knives, tail cutters, severing knives, rotary knives

15、 . 285.22 Machine-specific tools 285.23 Drying cylinders, Yankee cylinder, Steam and condensate system 295.24 Whole body access to confined spaces 295.25 Tail and web threading equipment . 295.26 Felts and wires . 305.27 Former section (wire section) . 305.28 Press section 315.29 Drying section 325.

16、30 Calenders (in-line calenders) 335.31 Measuring unit . 335.32 Reel up section 345.33 Roll handling equipment in the reel section or in the near vicinity 385.34 Pulpers and their loading facilities 386 Verification of safety requirements and/or measures 397 Information for use 397.1 General informa

17、tion . 397.2 Instruction handbook 397.3 Marking . 41Annex ZA (informative) Relationship between this European Standard and the Essential Requirements of EU Directive 2006/42/EC . 42Bibliography 43BS EN 1034-17:2012EN 1034-17:2012 (E) 3 Figures Figure 1 Example of a large complex tissue making machin

18、e with a “closed“ reel section (Safety devices are not shown) . 11Figure 2 Example of a tissue making machine with an “open“ reel section (Safety devices are not shown) 12Figure 3 Example of the former and press section on a tissue making machine 13Figure 4 Example of a reel section (Safety devices

19、are not shown) 14Figure 5 Safety distance 2,70 m on drum reeler . 34Figure 6 Safety distance 500 mm to prevent crushing by reels behind the drum reeler 37Tables Table 1 List of significant hazards 16Table 2 List of safety functions, Performance Level and Safety Integrity Level specified in this stan

20、dard . 21Table 3 Methods used to verify safety requirements and/or measures . 39BS EN 1034-17:2012EN 1034-17:2012 (E) 4 Foreword This document (EN 1034-17:2012) has been prepared by Technical Committee CEN/TC 198 “Printing and Paper Machinery - Safety”, the secretariat of which is held by DIN. This

21、European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by February 2013, and conflicting national standards shall be withdrawn at the latest by February 2013. Attention is drawn to the possibility that some of t

22、he elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and suppo

23、rts essential requirements of EU Directive 2006/42/EC. For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this document. EN 1034, Safety of machinery Safety requirements for the design and construction of paper making and finishing machines consists of the

24、following parts: Part 1: Common requirements Part 2: Barking drums Part 3: Rereelers and winders Part 4: Pulpers and their loading facilities Part 5: Sheeters Part 6: Calender Part 7: Chests Part 8: Refining plants Part 13: Machines for de-wiring bales and units Part 14: Reel splitter Part 16: Paper

25、 and board making machines Part 17: Tissue making machines (the present document) Part 21: Coating machines Part 22: Wood grinders Part 26: Roll packaging machines Part 27: Roll handling systems According to the CEN/CENELEC Internal Regulations, the national standards organisations of the following

26、countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, BS EN 1034-17:2012EN 1034-17:2012 (E) 5 Hungary, Iceland, Ireland, Italy, Latvia, Lithuania

27、, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 1034-17:2012EN 1034-17:2012 (E) 6 Introduction This document is a type C standard as stated in EN ISO 12100:2010. The machinery concerned and the

28、extent to which hazards, hazardous situations and events are covered are indicated in the scope of this document. For machines that have been designed and built according to the provisions of this C standard, the following stipulation applies: where provisions of this type C standard are different f

29、rom those which are stated in type A or B standards, or from provisions made in EN 1034-1:2000+A1:2010, the provisions of this type C standard take precedence over the provisions of the other standards. BS EN 1034-17:2012EN 1034-17:2012 (E) 7 1 Scope This European Standard applies to tissue making m

30、achines for the production of soft and crepe paper and applies together with EN 1034-1:2000+A1:2010. It deals with all significant hazards, hazardous situations and hazard events relevant to tissue making machines when used as intended and under the conditions foreseen by the manufacturer (see Claus

31、e 4). This document does not deal with pressure hazards in steam-heated drying cylinders and Yankee cylinders. NOTE Directive 97/23/EC gives essential safety requirements for equipment under pressure. This document does not apply to: paper and board making machines; tissue winder (plying machines);

32、tissue converting machines. At this stage this standard does not deal with tissue making machines which apply the dry process for sheet forming. These machines are intended to be included in the standard at a later date. This document is not applicable to tissue making machines which are manufacture

33、d before the date of publication of this document by CEN. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the late

34、st edition of the referenced document (including any amendments) applies. EN 349:1993+A1:2008, Safety of machinery Minimum gaps to avoid crushing of parts of the human body EN 547-1:1996+A1:2008, Safety of machinery Human body measurements Part 1: Principles for determining the dimensions required f

35、or openings for whole body access into machinery EN 614-1:2006+A1:2009, Safety of machinery Ergonomic design principles Part 1: Terminology and general principles EN 614-2:2000+A1:2008, Safety of machinery Ergonomic design principles Part 2: Interaction between the design of machinery and work tasks

36、 EN 626-1:1994+A1:2008, Safety of machinery Reduction of risks to health from hazardous substances emitted by machinery Part 1: Principles and specifications for machinery manufacturers EN 746-1:1997+A1:2009, Industrial thermoprocessing equipment Part 1: Common safety requirements for industrial the

37、rmoprocessing equipment EN 746-2:2010, Industrial thermoprocessing equipment Part 2: Safety requirements for combustion and fuel handling systems EN 894-1:1997+A1:2008, Safety of machinery Ergonomic requirements for the design of displays and control actuators Part 1: General principles for human in

38、teractions with displays and control actuators EN 894-2:1997+A1:2008, Safety of machinery Ergonomic requirements for the design of displays and control actuators Part 2: Displays BS EN 1034-17:2012EN 1034-17:2012 (E) 8 EN 953:1997+A1:2009, Safety of machinery Guards General requirements for the desi

39、gn and construction of fixed and movable guards EN 1034-1:2000+A1:2010, Safety of machinery Safety requirements for the design and construction of paper making and finishing machines Part 1: Common requirements EN 1034-4:2005+A1:2009, Safety of machinery Safety requirements for the design and constr

40、uction of paper making and finishing machines Part 4: Pulpers and their loading facilities EN 1034-6:2005+A1:2009, Safety of machinery Safety requirements for the design and construction of paper making and finishing machines Part 6: Calender EN 1037:1995+A1:2008, Safety of machinery Prevention of u

41、nexpected start-up EN 1088:1995+A2:2008, Safety of machinery Interlocking devices associated with guards Principles for design and selection EN 1127-1:2011, Explosive atmospheres Explosion prevention and protection Part 1: Basic concepts and methodology EN 1760-1:1997+A1:2009, Safety of machinery Pr

42、essure sensitive protective devices Part 1: General principles for the design and testing of pressure sensitive mats and pressure sensitive floors EN 1760-2:2001+A1:2009, Safety of machinery Pressure sensitive protective devices Part 2: General principles for the design and testing of pressure sensi

43、tive edges and pressure sensitive bars EN 1837:1999+A1:2009, Safety of machinery Integral lighting of machines EN 12198-1:2000+A1:2008, Safety of machinery Assessment and reduction of risks arising from radiation emitted by machinery Part 1: General principles EN 13023:2003+A1:2010, Noise measuremen

44、t methods for printing, paper converting, paper making machines and auxiliary equipment Accuracy grades 2 and 3 EN 13463-1:2009, Non-electrical equipment for use in potentially explosive atmospheres Part 1: Basic method and requirements EN 13478:2001+A1:2008, Safety of machinery Fire prevention and

45、protection EN 14491:2006, Dust explosion venting protective systems EN 60079-0:2009, Explosive atmospheres Part 0: Equipment General requirements (IEC 60079-0:2007) EN 60204-1:2006, Safety of machinery Electrical equipment of machines Part 1: General requirements (IEC 60204-1:2005, modified) EN 6020

46、4-11:2000, Safety of machinery Electrical equipment of machines Part 11: Requirements for HV equipment for voltages above 1 000 V a.c. or 1 500 V d.c. and not exceeding 36 kV (IEC 60204-11:2000) EN 61000-6-2:2005, Electromagnetic compatibility (EMC) Part 6-2: Generic standards Immunity for industria

47、l environments (IEC 61000-6-2:2005) EN 61241-0, Electrical apparatus for use in the presence of combustible dust Part 0: General requirements (IEC 61241-0:2004, modified + corrigendum November 2005) EN 61496-1:2004, Safety of machinery Electro-sensitive protective equipment Part 1: General requireme

48、nts and tests (IEC 61496-1:1997, modified) EN 61511-1:2004, Functional safety Safety instrumented systems for the process industry sector Part 1: Framework, definitions, system, hardware and software requirements (IEC 61511-1:2003 + Corrigendum 2004) BS EN 1034-17:2012EN 1034-17:2012 (E) 9 EN 61511-2:2004, Functional safety Safety instrumented systems for the process industry sector Part 2: Guidelines for the application of IEC 61511-1 (IEC 61511-2:2003) EN 61800-3:2004, Adjustable speed electrical power