BS EN 1034-7-2005+A1-2009 Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Chests《机械安全性 纸张制造和整饰机械设计和构造的安全性要求 箱》.pdf

1、BRITISH STANDARDBS EN 1034-7:2005+A1:2009Safety of machinery Safety requirements for the design and construction of paper making and finishing machinesPart 7: ChestsICS 85.100Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 12/10/2010 07:20, Uncontrolled Copy, (c) BSIBS EN 1034-7:2005+A1:2009T

2、his British Standard waspublished under the authorityof the Standards Policy andStrategy Committee on 18 November 2005 BSI 2010 ISBN 978 0 580 62504 6National forewordThis British Standard is the UK implementation of EN 1034-7:2005+A1:2009.It supersedes BS EN 1034-7:2005 which is withdrawn.The UK pa

3、rticipation in its preparation was entrusted by Technical CommitteeMCE/3, Safeguarding of machinery, to Subcommittee MCE/3/9, Paper andprinting machines Safety.A list of organizations represented on this subcommittee can be obtained onrequest to its secretary.This publication does not purport to inc

4、lude all the necessary provisions of acontract. Users are responsible for its correct application.Compliance with a British Standard cannot confer immunity fromlegal obligations.Amendments/corrigenda issued since publicationThe start and finish of text introduced or altered by amendment is indicated

5、in the text by tags. Tags indicating changes to CEN text carry the numberof the CEN amendment. For example, text altered by CEN amendment A1is indicated by Date Comments31 July 2010 Implementation of CEN amendment A1:2009Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 12/10/2010 07:20, Uncont

6、rolled Copy, (c) BSIEUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 1034-7:2005+A1 December 2009 ICS 85.100 Supersedes EN 1034-7:2005English Version Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 7: Chests Scurit des machi

7、nes - Prescriptions de scurit pour la conception et la construction de machines de fabrication et de finition du papier - Partie 7 : Cuviers Sicherheit von Maschinen - Sicherheitstechnische Anforderungen an Konstruktion und Bau von Maschinen der Papierherstellung und Ausrstung - Teil 7: Btten This E

8、uropean Standard was approved by CEN on 21 April 2005 and includes Amendment 1 approved by CEN on 17 November 2009. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any

9、 alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made b

10、y translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,

11、 Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NO

12、RMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2009 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 1034-7:2005+A1:2009: ELicensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 12/10/2010 07:20, Uncontrolled Copy, (c) B

13、SI2 Contents Page Foreword 3Introduction .41 Scope 42 Normative references 43 Terms and definitions .54 List of significant hazards 55 Safety requirements and/or measures 75.1 General 75.2 Power transmission elements 75.3 Working platforms and means of access 75.4 Inspection holes.75.5 Electrical eq

14、uipment 75.6 Hydraulic and pneumatic equipment .75.7 Level control devices 75.8 Lighting .85.9 Noise .85.10 Equipment and measures for maintenance and cleaning .85.11 Powered gate valves .85.12 Emergency stop devices and emergency measures .95.13 Explosion protection .96 Verification of safety requi

15、rements and/or measures 97 Information for use 9Annex ZA (informative) Relationship between this European Standard and the Essential Requirements of EU Directive 98/37/EC . 11Annex ZB (informative) !Relationship between this European Standard and the Essential Requirements of EU Directive 2006/42/EC

16、“ 12BS EN 1034-7:2005+A1:2009EN 1034-7:2005+A1:2009 (E)Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 12/10/2010 07:20, Uncontrolled Copy, (c) BSI3 Foreword This document (EN 1034-7:2005+A1:2009) has been prepared by Technical Committee CEN/TC 198 “Printing and paper machinery - Safety”, the

17、 secretariat of which is held by DIN. This document shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by June 2010, and conflicting national standards shall be withdrawn at the latest by June 2010. Attention is drawn to the

18、possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document includes Amendment 1, approved by CEN on 17 November 2009. This document supersedes EN 1034-7:2005

19、. The start and finish of text introduced or altered by amendment is indicated in the text by tags !“. !This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s) For relation

20、ship with EU Directive(s), see informative Annexes ZA and ZB, which are integral parts of this document.“ According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cypr

21、us, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. . BS EN 1034-7:2005+A1:2009EN 1034-7:2005

22、+A1:2009 (E)Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 12/10/2010 07:20, Uncontrolled Copy, (c) BSI4 Introduction This European Standard is a C type standard as stated in EN ISO 12100-1. The extent to which hazards, hazardous situations and hazard results are covered is indicated in the

23、scope of this standard. For machines which have been designed and built in accordance with the stipulations of this C type standard, the following applies: where C type standard stipulations deviate from respective stipulations in A or B type standards, the stipulations made in this C type standard

24、take precedence over stipulations in the other standards. 1 Scope This European Standard applies to chests used in paper making and shall be applied together with !EN 1034-1:2000+A1:2010“. It deals with all significant hazards, hazardous situations and hazard events relevant to chests when they are

25、used as intended and under the conditions foreseen by the manufacturer (see clause 4). This European Standard does not apply to tanks for chemicals, storage tanks for starch and other additives used in paper making or basins or vessels for waste water resulting from the paper making process. This Eu

26、ropean Standard does not apply to chests manufactured before the publication date of this European Standard. 2 Normative references The following referenced documents are indispensable for the application of this European Standard. For dated references, only the edition cited applies. For undated re

27、ferences, the latest edition of the referenced document (including any amendments) applies. EN 294:1992, Safety of machinery Safety distances to prevent danger zones being reached by the upper limbs. EN 349:1993, Safety of machinery Minimum gaps to avoid crushing of parts of the human body. EN 418:1

28、992, Safety of machinery Emergency stop equipment Functional aspects. EN 547-2:1996, Safety of machinery Human body measurement Part 2: Principles for determining the dimensions required for access openings. EN 953:1997, Safety of machinery Guards General requirements for the design and construction

29、 of fixed and movable guards. EN 954-1:1996, Safety of machinery Safety-related parts of control systems Part 1: General principles for design. EN 982:1996, Safety of machinery Safety requirements for fluid power systems and components Hydraulics. EN 983:1996, Safety of machinery Safety requirements

30、 for fluid power systems and components Pneumatics. BS EN 1034-7:2005+A1:2009EN 1034-7:2005+A1:2009 (E)Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 12/10/2010 07:20, Uncontrolled Copy, (c) BSI5 !EN 1034-1:2000+A1:2010“, Safety of machinery Safety requirements for the design and constructio

31、n of paper making and finishing machines Part 1: Common requirements. EN 1037:1995, Safety of machinery Prevention of unexpected start-up. EN 1050:1996, Safety of machinery Principles for risk assessmen.t EN 1127-1:1997, Explosive atmospheres Explosion prevention and protection Part 1: Basic concept

32、s and methodology. EN 13023:2003, Noise measurement methods for printing, paper converting, paper making machines and auxiliary equipment Accuracy categories 2 and 3. EN 50144-1:1998, Safety of hand-held powered electrical devices Part 1: General requirements. EN 60204-1:1997, Safety of machinery El

33、ectrical equipment of machines Part 1: General requirements (IEC 60204-1:1997). EN 60974-1:1988, Arc welding equipment - Part 1: Welding power sources (IEC 60974-1:1998). EN 61000-6-2:2001, Electromagnetic compatibility (EMC) Part 6-2: Generic standards; immunity for industrial environment (IEC 6100

34、0-6-2:1999, modified). EN ISO 12100-1:2003, Safety of machinery Basic concepts, general principles for design Part 1: Basic terminology, methodology (ISO 12100-1:2003). EN ISO 12100-2:2003, Safety of machinery Basic concepts, general principles for design Part 2: Technical principles (ISO 12100-2:20

35、03). EN ISO 14122:2001 (all parts), Safety of machinery Permanent means of access to machinery. 3 Terms and definitions For the purposes of this European Standard, the definitions given in !EN 1034-1:2000+A1:2010“, EN ISO 12100-1:2003, and the following definitions apply: 3.1 chest vessel usually ma

36、de of special steel or concrete and equipped with a fixed agitating device, associated measuring and control devices and necessary shutoff devices intended for storing (stacking), collecting and mixing pulp 3.2 agitator part of the mixing device shaped as a propeller or agitating shaft for optimum d

37、istribution of the pulp components used and forming a suspension 3.3 pulp suspension of fibre, additives and inks for the production of paper and board 4 List of significant hazards This clause contains all the significant hazards, as far as they are dealt with in this European Standard, which are i

38、dentified by risk assessment in accordance with EN 1050 as significant for this type of machinery and which require action to eliminate or reduce the risk. BS EN 1034-7:2005+A1:2009EN 1034-7:2005+A1:2009 (E)Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 12/10/2010 07:20, Uncontrolled Copy, (

39、c) BSI6 When carrying out the risk assessment, the machine designer has to check whether the list of hazards in Table 1 is complete and applicable with respect to the particular machine. Table 1 List of significant hazards Hazards EN 1034-7:2005 !EN 1034-1:2000+A1:2010“ Mechanical hazards Crushing h

40、azard 5.2; 5.4.2; 5.11 5.1; 5.3 Shearing hazard 5.11 5.1 Entanglement hazard 5.2; 5.10.5 5.2 Drawing-in or trapping hazard 5.2 5.1; 5.4 Friction or abrasion hazard 5.2 5.1 High-pressure fluid ejection hazard 5.6 5.24 Ejection of parts 5.2; 5.13 5.2 Slip, trip and fall hazards 5.3; 5.4.1 5.5 Accumula

41、tion of energy in machinery 5.10.4 Electrical hazards, for example: Electrical contact (direct or indirect) 5.5 5.23 External influences on electrical equipment 5.5 5.23 Thermal hazards resulting in: Burns and scalds 5.10.2 5.13; 5.17 Hazards generated by noise, resulting in: Hearing loss (deafness)

42、, other physiological disorders 5.9; 7 5.15 Interferences with speech communication, acoustic signals etc. 5.9; 7 5.15 Hazards generated by radiation: Ionizing radiation sources 5.7.1 5.20 Hazards generated by materials and substances processed, used or exhausted by machines: Hazards resulting from

43、harmful gases and from anoxia 5.4.3; 5.10.3. 5.10.5; 5.10.6, 7 5.16 Explosion hazards 5.13 5.13; 5.18; 5.19; 5.23 Hazards generated by neglecting ergonomic principles in machine design caused for example by: Excessive efforts 5.4.2 Inadequate area lighting 5.8 5.18 Hazards caused by failure of energ

44、y supply and other functional disorders, for example Failure of energy supply 5.5; 5.10.1 5.8 Unexpected ejection of fluids 5.4.3; 5.7.2 5.24 Malfunction of control system 5.5: 5.6; 5.12 5.14 Emergency measures 5.12 5.7 BS EN 1034-7:2005+A1:2009EN 1034-7:2005+A1:2009 (E)Licensed Copy: Wang Bin, ISO/

45、EXCHANGE CHINA STANDARDS, 12/10/2010 07:20, Uncontrolled Copy, (c) BSI7 5 Safety requirements and/or measures 5.1 General Machinery shall comply with the safety requirements and/or measures of this clause. In addition, the machinery shall be designed according to the principles of EN ISO 12100 for h

46、azards relevant but not significant which are not dealt with by this European Standard. 5.2 Power transmission elements The power transmission elements between drive and agitator that are located outside the chest shall be safeguarded by a fixed enclosure in accordance with 3.2.1 of EN 953:1997 or 5

47、.2 of !EN 1034-1:2000+A1:2010“. Table 2 of EN 294:1992 shall be noted. 5.3 Working platforms and means of access 5.3.1 Working platforms on open chests and their means of access shall be located or be provided with adequate fall-off protection such that the height of the railing or fall-off protecti

48、on at the chest is at least 1,20 m. In all other respects, working platforms and their means of access shall comply with 5.5 of !EN 1034-1:2000+A1:2010“ and EN ISO 14122. 5.3.2 For requirements for the means provided for whole-body access to the chest, see 5.10.4. 5.4 Inspection holes 5.4.1 Open hol

49、es provided for testing or inspection shall be dimensioned or provided with fixed insets such as bracing or mesh wires or other types of fall-off protection in such a way as to prevent persons from falling into the chest. This is achieved, for example, where there are no gaps wider than 0,30 m maximum or fall-off protection is provided in accordance with 5.3.1. Inspection holes shall be positioned in such a way that