1、| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | BRITISH STANDARD BS EN 1164:1999 The Europ
2、ean Standard EN 1164:1998 has the status of a British Standard ICS 59.040 NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW Feather and down Test methods Determination of the turbidity of an aqueous extractBS EN 1164:1999 This British Standard, having been prepared under the dir
3、ection of the Sector Committee for Materials and Chemicals, was published under the authority of the Standards Committee and comes into effect on 15 March 1999 BSI 03-1999 ISBN 0 580 32184 3 Amendments issued since publication Amd. No. Date Text affected National foreword This British Standard is th
4、e English language version of EN 1164:1998. The UK participation in its preparation was entrusted to Technical Committee TCI/73, Fillings and filled articles, which has the responsibility to: aid enquirers to understand the text; present to the responsible European committee any enquiries on the int
5、erpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. A list of organizations represented on this committee can be obtained on request to its secretary. Cross-references The British Standards w
6、hich implement international or European publications referred to in this document may be found in the BSI Standards Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Find” facility of the BSI Standards Electronic Catalogue. A British Standard does
7、 not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an insid
8、e front cover, the EN title page, pages 2 to 6, an inside back cover and a back cover.CEN European Committee for Standardization Comite Europe en de Normalisation Europa isches Komitee fu r Normung Central Secretariat: rue de Stassart 36, B-1050 Brussels 1998 CEN All rights of exploitation in any fo
9、rm and by any means reserved worldwide for CEN national Members. Ref. No. EN 1164:1998 E EUROPEAN STANDARD EN 1164 NORME EUROPE ENNE EUROPA ISCHE NORM September 1998 ICS 59.040; 67.120.20; 97.160 Descriptors: stuffings, feathers, tests, aqueous extract, transparency, measurements, turbidity, cleanli
10、ness checks, testing conditions, procedure English version Feather and down Test methods Determination of the turbidity of an aqueous extract Plumes et duvets Me thodes dessais De termination de la turbidite dun extrait aqueux Federn und Daunen Pru fverfahren Bestimmung der Tru bung eines wa ssrigen
11、 Extraktes This European Standard was approved by CEN on 13 August 1998. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliogra
12、phical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a C
13、EN member into its own language and notified to the Central Secretariat has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway
14、, Portugal, Spain, Sweden, Switzerland and United Kingdom.Page 2 EN 1164:1998 BSI 03-1999 Foreword This European Standard has been prepared by Technical Committee CEN/TC 222, Feather and down as filling material for any article, as well as finished articles filled with feather and down, the Secretar
15、iat of which is held by UNI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by March 1999, and conflicting national standards shall be withdrawn at the latest by March 1999. Annex A is informative.
16、According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Por
17、tugal, Spain, Sweden, Switzerland and the United Kingdom.Page 3 EN 1164:1998 BSI 03-1999 1 Scope This European Standard specifies a method to check one of the cleanliness aspects of feather and down ready to be used through the determination of the amount of undissolved and dissolved matter present
18、in the aqueous extract. 2 Normative references This European Standard incorporates by dated or undated reference, provisions from other publications. These normative references are cited at the appropriate places in the text and the publications are listed hereafter. For dated references, subsequent
19、 amendments to or revisions of any of these publications apply to this European Standard only when incorporated in it by amendment or revision. For undated references the latest edition of the publication referred to applies. EN 20139, Textiles Standard atmospheres for conditioning and testing. (ISO
20、 139:1973) EN 20187, Paper, board and pulps Standard atmosphere for conditioning and testing and procedure for monitoring the atmosphere and conditioning of samples. (ISO 187:1990) EN ISO 3696, Water for analytical laboratory use Specification and test methods. (ISO 3696:1987) 3 Definitions For the
21、purposes of this standard the following definition applies. 3.1 turbidity reduction of transparency of the filtrate suspension caused by the presence of undissolved and dissolved matter 4 Principle A test specimen having a specified mass is mixed in water in the ratio 1:100 and correctly shaken. Aft
22、er filtration, the aqueous extract is gradually transferred into a graduated cylinder, on the bottom of which is a cross of specified dimensions, and the height of the suspension shall be determined when the cross is no longer visible. Go on filling the graduated cylinder for 20 mm at least and then
23、 let the aqueous extract gradually flow down, recording the height when the cross is visible again. The turbidity is given by the mean height of the determination during upward and downward phases. 5 Reagents Water, grade 3 in accordance with EN ISO 3696. 6 Conditioning and testing Conditioning and
24、testing shall be carried out in accordance with EN 20139 and the temperature and relative humidity shall be measured in accordance with EN 20187. 7 Apparatus 7.1 The turbidity meter (see Figure 1) consists of two parts: 7.1.1 A graduated transparent cylinder, higher than 300 mm and from 30 mm to 35
25、mm in diameter, graduated in 1 mm divisions. The cylinder is equipped with a pipe allowing the liquid to go in and out of the measuring device. On the flat bottom of the cylinder is fixed a disc of plastic material on which are two double black lines (1 0,02) mm apart, as long as the cylinder diamet
26、er, fast to light and resistant to water, and of width (0,5 0,02) mm and another two double black lines, with the same dimensions, perpendicular to the first ones. The cylinder is placed on top of a white surface. 7.1.2 A container, capacity 1 000 ml, mounted on a lifter acting in a communicative ve
27、ssel system, connected to the turbidity meter by a flexible tube connected to the pipe (see 7.1.1). NOTE The contrast of the two double black lines and the white material should be assessed for clarity. 7.2 Analytical balance, accurate to at least 10 mg. 7.3 Tumbler jar, capacity 2 000 ml. 7.4 Beake
28、r, capacity 2 000 ml. 7.5 Shaking machine, with 150 shakes per minute and with shaking swing of 40 mm or tumbling machine with 150 min 21 . 7.6 Sintered (fritted) filter, pore size index P 160 10 cm diameter (see ISO 4793). 7.7 Light source: north sky light or an equivalent source of illumination of
29、 about at least 600 lx 7.8 Lux meter, giving an indication of the room light. 8 Procedure 8.1 Place the conditioned test specimen of a representative part of the laboratory bulk sample (see prEN 1883) with a mass of (10 0,1) g in the tumbler jar, containing 1 000 ml of water (see clause 5). The jar
30、is tumbled at room temperature for (60 5) min. 8.2 Without wringing the excess water from the test specimen, filter the suspension through the sintered filter (7.6) and put the filtrate into the beaker (7.4).Page 4 EN 1164:1998 BSI 03-1999 8.3 Before starting the test check that the container is in
31、the low position. 8.4 Pour the liquid into the container. 8.5 Gradually lift up the container so that the liquid flows into the graduated cylinder. 8.6 Observe from the top through the liquid, by normal vision or vision corrected to normal, the height of the filtrate as soon as the cross is no longe
32、r visible by the operator and record the height on the graduated cylinder in millimetres as H 1 . 8.7 Raise the container at least another 20 mm. 8.8 Gradually lower the container in such a way that the liquid flows out of the graduated cylinder. 8.9 Observe the height of the filtrate as soon as the
33、 cross is visible again by the operator and record the height on the graduated cylinder in millimetres as H 2 . 8.10 Compare H 1 and H 2 .I fH 1 and H 2 differ by more than 10 mm repeat the procedure from 8.4. If the difference persists, change the operator. If it cannot be cured, note the individua
34、l values in the test report. 8.11 Register the mean value of H 1 and H 2 . 8.12 Repeat the test on at least one other test specimen. The procedure described from 8.2 to 8.12 shall be repeated by another operator. 9 Expression of results Calculate: the mean values of H 1 in millimetres, to the neares
35、t millimetre; the mean values of H 2 in millimetres, to the nearest millimetre; the general mean of H 1 and H 2 in millimetres, rounded to the nearest multiple of five. 10 Test report The test report shall include at least the following information: a reference to this standard; date and place of te
36、sting; identification mark of the sample tested; the general mean of H 1 and H 2 in millimetres, rounded to the nearest multiple of five. When the difference between the mean of H 1 and the mean of H 2 is greater than 10 mm, in addition to the general mean these two means shall be reported in accord
37、ance with clause 9; any deviation from the standard procedure and any other circumstances that may have affected the result.Page 5 EN 1164:1998 BSI 03-1999 1 graduated cylinder 2 container 3 rod equipped with a device to raise and lower the container 4 disc with cross on the bottom of the graduated
38、cylinder 5 double black line Figure 1 Turbidity meterPage 6 EN 1164:1998 BSI 03-1999 Annex A (informative) Bibliography EN 1883, Feather and down Sampling in view of tests. ISO 4793, Laboratory sintered (fritted) filters Porosity grading, classification and designation.blankBSI 389 Chiswick High Roa
39、d London W4 4AL | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | BSI British Standards Institut
40、ion BSI is the independent national body responsible for preparing British Standards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter. Revisions British Standards are updated by amendment or revision. Users of British Standards shoul
41、d make sure that they possess the latest amendments or editions. It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical committe
42、e responsible, the identity of which can be found on the inside front cover. Tel: 020 8996 9000. Fax: 020 8996 7400. BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards. Buying standards Orders for all BS
43、I, international and foreign standards publications should be addressed to Customer Services. Tel: 020 8996 9001. Fax: 020 8996 7001. In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as British Standards, unless ot
44、herwise requested. Information on standards BSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give details on all its product
45、s and services. Contact the Information Centre. Tel: 020 8996 7111. Fax: 020 8996 7048. Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of these and other benefits contact Membership Administ
46、ration. Tel: 020 8996 7002. Fax: 020 8996 7001. Copyright Copyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the international standardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be repr
47、oduced, stored in a retrieval system or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI. This does not preclude the free use, in the course of implementing the standard, of necessary details such as symbols, and size,
48、 type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. If permission is granted, the terms may include royalty payments or a licensing agreement. Details and advice can be obtained from the Copyright Manager. Tel: 020 8996 7070.
copyright@ 2008-2019 麦多课文库（www.mydoc123.com）网站版权所有
备案/许可证编号：苏ICP备17064731号-1