BS EN 1230-1-2009 Paper and board intended to come into contact with foodstuffs - Sensory analysis - Odour《与食品接触的纸和纸板 感官分析 气味》.pdf

1、BS EN 1230-1:2009ICS 55.040; 67.250; 85.060NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBRITISH STANDARDPaper and board intended to come into contact with foodstuffs Sensory analysis Part 1: OdourLicensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 18/03/2010 01:52, Uncont

2、rolled Copy, (c) BSIThis British Standardwas published under theauthority of the StandardsPolicy and StrategyCommittee on 31 January2010. BSI 2009ISBN 978 0 580 61491 0Amendments/corrigenda issued since publicationDate CommentsBS EN 1230-1:2009National forewordThis British Standard is the UK impleme

3、ntation of EN 1230-1:2009. Itsupersedes BS EN 1230-1:2001 which is withdrawn.The UK participation in its preparation was entrusted to TechnicalCommittee CW/47/3, Paper and board in contact with food.A list of organizations represented on this committee can be obtained onrequest to its secretary.This

4、 publication does not purport to include all the necessary provisionsof a contract. Users are responsible for its correct application.Compliance with a British Standard cannot confer immunityfrom legal obligations.Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 18/03/2010 01:52, Uncontrolled

5、Copy, (c) BSIBS EN 1230-1:2009EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 1230-1 November 2009 ICS 55.040; 67.250; 85.060 Supersedes EN 1230-1:2001English Version Paper and board intended to come into contact with foodstuffs -Sensory analysis - Part 1: Odour Papier et cartons destins entrer

6、 avec les denres alimentaires - Analyse sensorielle - Partie 1 : Odeur Papier und Pappe vorgesehen fr den Kontakt mit Lebensmitteln - Sensorische Analyse - Teil 1: Geruch This European Standard was approved by CEN on 5 October 2009. CEN members are bound to comply with the CEN/CENELEC Internal Regul

7、ations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member. This

8、European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions. CEN members are th

9、e national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerlan

10、d and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2009 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 12

11、30-1:2009: ELicensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 18/03/2010 01:52, Uncontrolled Copy, (c) BSIBS EN 1230-1:2009EN 1230-1:2009 (E) 2 Contents Page Foreword 3 Introduction .4 1 Scope 5 2 Normative references 5 3 Terms and definitions .5 4 Principle 6 5 Test panel .6 6 Test conditions

12、6 7 Equipment 6 7.1 General 6 7.2 Flat bottom flasks 6 8 Sampling and storage of sample .6 9 Preparation of sample .7 10 Procedure .7 11 Evaluation of the test 7 12 Expression of results 7 12.1 Calculation 7 12.2 Result 8 13 Test report 8 Annex A (informative) Example of an efficient cleaning proced

13、ure 9 Bibliography . 10 Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 18/03/2010 01:52, Uncontrolled Copy, (c) BSIBS EN 1230-1:2009EN 1230-1:2009 (E) 3 Foreword This document (EN 1230-1:2009) has been prepared by Technical Committee CEN/TC 172 “Pulp, paper and board”, the secretariat of whi

14、ch is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by May 2010, and conflicting national standards shall be withdrawn at the latest by May 2010. Attention is drawn to the possibility

15、that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 1230-1:2001. With regard to EN 1230-1:2001 the following changes have been made: including the r

16、eference to the CEN/TR 15645-1 (Note in Clause 5); simplifying the descriptions of evaluation scale of odour (11.1); editorial updating. EN 1230 consists of the following parts, under the general title Paper and board intended to come into contact with foodstuffs Sensory analysis: Part 1: Odour Part

17、 2: Off-flavour (taint) Annex A is informative. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Ger

18、many, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 18/03/2010 01:52, Uncontrolled Copy, (c)

19、 BSIBS EN 1230-1:2009EN 1230-1:2009 (E) 4 Introduction The purpose of testing paper or board for odour is to establish whether the material to be tested possesses an inherent odour, when kept at room temperature. The test serves for evaluating the sensory quality of paper and board intended for food

20、 packaging or otherwise to come into contact with foodstuffs. NOTE Temperature conditions other than room temperature may be used. In this case the result is not in conformity with this European Standard, which circumstances should be reported together with the result. In order to give reliable resu

21、lts, this test should be performed by selected assessors. The result may be influenced by the time elapsed between manufacturing and testing as well as by the storage conditions of the paper or board. Part 2: Off flavour (taint) comprises the corresponding method for the estimation of changes in tas

22、te caused by transmission of substances to a test substance. Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 18/03/2010 01:52, Uncontrolled Copy, (c) BSIBS EN 1230-1:2009EN 1230-1:2009 (E) 5 1 Scope This European Standard specifies the test method for assessment of the odour released by a pap

23、er or board sample. It is applicable to all kinds of paper and board, including coated and/or printed material, intended to come into direct or indirect contact with foodstuffs. It is not applicable for the determination of consumers preference. 2 Normative references The following referenced docume

24、nts are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN ISO 186:2002, Paper and board Sampling to determine average quality (ISO 186:

25、2002) 3 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1 odour organoleptic attribute perceptible by the olfactory organ on sniffing certain volatile substances 3.2 sample aggregate of all the specimens taken from the lot to provide information

26、on the average quality of the lot and possibly serve as a basis for a decision on the lot EN ISO 186:2002 3.3 test piece the piece or pieces of paper or board on which the measurement is carried out in accordance with the stipulations of the method of test NOTE The test piece is generally taken from

27、 a specimen; in some instances the test piece may be the specimen itself, or several specimens. EN ISO 186 3.4 assessor any person taking part in a sensory test ISO 5492:2008 3.5 selected assessor assessor chosen for his/her ability to perform a sensory test ISO 5492:2008 Licensed Copy: Wang Bin, IS

28、O/EXCHANGE CHINA STANDARDS, 18/03/2010 01:52, Uncontrolled Copy, (c) BSIBS EN 1230-1:2009EN 1230-1:2009 (E) 6 4 Principle Test pieces of the material to be examined are stored in glass jars for 20 h to 24 h at (23 2) C in the dark. The odour of the air in the jars is estimated by a panel consisting

29、of selected assessors. The intensity of the odour is evaluated on a scale from 0 to 4. 5 Test panel The test panel consists of at least six selected assessors under the understanding that six consistent results are given, i.e. that the difference from the median value of the single results should no

30、t be more than 1,5. The members of the panel shall be trained in the evaluation of odour originating from paper and board. Guidelines concerning the testing and selection of assessors are given in ISO 8586-1. The assessors shall be in good health and shall not suffer from the common cold at the time

31、 of the test. NOTE It is recommended that a reference series is available for training of the assessors and to maintain the level of performance of the test panel during training sessions. Document CEN/TR 15645-1, Paper and board intended to come into contact with foodstuffs Calibration of the off-f

32、lavour test Part 1: Odour gives instructions for preparation and use of reference series for odour. 6 Test conditions The evaluation shall be carried out at (23 2) C in a quiet, well ventilated room that is free from odours. For more details, see ISO 8589. 7 Equipment 7.1 General All equipments used

33、 shall be free from odour and only in use for sensory analysis. Use only minimum-odour cleaning agents for cleaning. Care is needed to ensure that lids, seals and inserts do not become a source of odour. An example of an efficient cleaning process is given in Annex A. 7.2 Flat bottom flasks Wide-nec

34、ked with conical ground joint and stopper, 500 ml capacity. Jars with wide screw neck intended for storage of dry chemicals, or domestic preserve jars may also be used. The flasks shall be made of coloured glass or covered by aluminium foil whenever there is a possibility that the appearance of the

35、sample may influence the assessors. The number of flasks set up shall be equal to the number of members in the test panel. 8 Sampling and storage of sample If the test result is to be used for assessment of a lot of paper, the number of rolls or stacks to be tested and the method of selecting them s

36、hall be in accordance with EN ISO 186. If the test is made on another type of sample, make sure that the specimens taken are representative of the sample received. The sampling and storage shall be carried out in such a way that contamination of the sample is avoided. The outer layers of a stack or

37、roll shall be discarded. Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 18/03/2010 01:52, Uncontrolled Copy, (c) BSIBS EN 1230-1:2009EN 1230-1:2009 (E) 7 The sample shall be wrapped in several layers of unlacquered aluminium foil immediately after sampling to prevent uptake and/or loss of od

38、orous substances from the environment. Multilayer board shall be tested as a whole. 9 Preparation of sample All handling of the sample shall take place in an odour-free room or cupboard. From the sample cut stripes to an amount of test pieces sufficient to give 6 dm of paper or board for each flask.

39、 Minimum size of the stripes is 1 cm x 5 cm. Mention the size in the test report. 10 Procedure Introduce the test pieces (6 dm) loosely into the flat bottom flasks (7.2). Ensure that the surfaces of the test pieces are freely exposed. Close the flat bottom flasks and keep them for 20 h to 24 h at (2

40、3 2) C in the dark. 11 Evaluation of the test Give each assessor her/his own coded flasks in a randomized order, a known empty flask (zero odour) and an evaluation form. NOTE 1 A computerised data collection system may be used for the evaluation. The assessor shakes the flask, opens it and sniffs th

41、e contents immediately after opening the vessel. If a repetition is necessary, the vessel shall be kept closed for at least 2 min. The assessor records the intensity of the perceived odour on the evaluation form as follows: a) 0 = no perceptible odour; b) 1 = odour just perceptible (difficult to def

42、ine); c) 2 = weak odour; d) 3 = clear odour; e) 4 = strong odour. Though the steps of the scale uses only whole numbers, the assessors may use half number ratings if considered necessary. Starting with intensity 2, a description of the odour may be given. NOTE 2 Due to the sensory fatigue it is reco

43、mmended that not more than five tests are performed in succession. In order to avoid adaptation effects, it is recommended that the assessors pause for 1 min to 2 min between each test. 12 Expression of results 12.1 Calculation Calculate the median of all the individual scores. Licensed Copy: Wang B

44、in, ISO/EXCHANGE CHINA STANDARDS, 18/03/2010 01:52, Uncontrolled Copy, (c) BSIBS EN 1230-1:2009EN 1230-1:2009 (E) 8 One individual result shall be discarded if it differs from the median by 1,5 or more. If a result is discarded the median has to be recalculated. If more than one individual result di

45、ffers or there are fewer than six consistent results, the test shall be repeated using, if possible, new test pieces. NOTE The median value first should be rounded to the nearest 0,5 before discarding an individual result. 12.2 Result Report the median value to the nearest 0,5. 13 Test report The te

46、st report shall include the following information: a) reference to this European Standard; b) date and place of testing; c) all information necessary for complete identification of the sample; d) the size of the stripes; e) the test result including the median value as specified in Clause 12 and any

47、 description of the odour as specified in Clause 11; f) any departure from this European Standard or any circumstances that may have affected the result. Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 18/03/2010 01:52, Uncontrolled Copy, (c) BSIBS EN 1230-1:2009EN 1230-1:2009 (E) 9 Annex A (

48、informative) Example of an efficient cleaning procedure Clean and odourless flasks or jars are obtained by the following procedure. a) Add 5 g of sodium carbonate into the vessel to be cleaned. Add hot water and shake. b) Wash with hot tap water. c) Add 100 ml of hydrochloric acid (35 %), diluted in

49、 a small quantity of water and shake. d) Rinse with tap water. e) Rinse with distilled water. f) Rinse with ethanol. g) Rinse with acetone. h) Dry the vessel quickly with a hot air blower or flow of drying gas, or slowly by inserting the vessel in a drying cupboard at about 40 C. Specially designed washing machines and cleaning agents free from odour also give acceptable results. Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 18/03/2010 01:52, Uncontrolled Copy, (c) BSIBS EN 1230-1:2009EN 1230-1:2009 (E) 10 Bibliography 1 ISO 66