BS EN 134-1998 Respiratory protective devices - Nomenclature of components《呼吸保护装置 零部件命名》.pdf

1、| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | BRITISH STANDARD BS EN 134:1998 The Europe

2、an Standard EN 134:1998 has the status of a British Standard ICS 01.040.13;13.340.30 NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW Respiratory protective devices Nomenclature of componentsThis British Standard, having been prepared under the direction of the Health and Envir

3、onment Sector Board, was published under the authority of the Standards Board and comes into effect on 15 May 1998 BSI 1998 ISBN 0 580 29865 5 BS EN 134:1998 Amendments issued since publication Amd. No. Date Text affected National foreword This British Standard is the English language version of EN

4、134:1998. It supersedes BS EN 134:1991 which is withdrawn. The UK participation in its preparation was entrusted by Technical Committee PH/4, Respiratory protection, to Subcommittee PH/4/1, Terminology and selection, which has the responsibility to: aid enquirers to understand the text; present to t

5、he responsible European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. A list of organizations represented on this subcommittee can be obtained on reque

6、st to its secretary. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Standards Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Find” facility of th

7、e BSI Standards Electronic Catalogue. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Sum

8、mary of pages This document comprises a front cover, an inside front cover, the EN title page, pages 2 to 24, an inside back cover and a back cover.CEN European Committee for Standardization Comite Europe en de Normalisation Europa isches Komitee fu r Normung Central Secretariat: rue de Stassart 36,

9、 B-1050 Brussels 1998 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 134:1998 E EUROPEAN STANDARD EN 134 NORME EUROPE ENNE EUROPA ISCHE NORM January 1998 ICS 01.040.13: 13.340.30 Supersedes EN 134:1990 Descriptors: Personal protec

10、tive equipment, accident prevention, respiratory protective equipment, components, nomenclature, multilingual nomenclature English version Respiratory protective devices Nomenclature of components Appareils de protection respiratoire Nomenclature des composants Atemschutzgera te Benennungen von Einz

11、elteilen This European Standard was approved by CEN on 21 December 1997. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliogra

12、phical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a C

13、EN member into its own language and notified to the Central Secretariat has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway

14、, Portugal, Spain, Sweden, Switzerland and United Kingdom.Page 2 EN 134:1998 BSI 1998 Foreword This European Standard has been prepared by Technical Committee CEN/TC 79, Respiratory protective devices, the secretariat of which is held by DIN. This European Standard supersedes EN 134:1990. This Europ

15、ean Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by July 1998, and conflicting national standards shall be withdrawn at the latest by July 1998. This European Standard has been prepared under a mandate given to

16、 CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). For relationship with EU Directive(s), see informative annex ZA, which is an integral part of this standard. According to the CEN/CENELEC Internal Regulations, the nationa

17、l standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the United Kingdom. Cont

18、ents Page Foreword 2 1 Scope 3 2 Normative references 3 3 Nomenclature 5 3.1 Facepieces 5 3.2 Filtering devices 9 3.3 Breathing apparatus 15 Annex ZA (informative) Clauses of this European Standard addressing essential requirements or other provisions of EC Directives 24Page 3 EN 134:1998 BSI 1998 1

19、 Scope This European Standard specifies a harmonized nomenclature for typical components of respiratory protective devices. It does not specify which or how many components are used and where they are located in the apparatus. The illustrations used are given as examples only for the identification

20、of the different parts and the corresponding terms for facilitating the application. The definitions and terms used are given in EN 132 and EN 135. The terms are given in the three official CEN languages. 2 Normative references This European Standard incorporates, by dated or undated reference, prov

21、isions from other publications. These normative references are cited at the appropriate places in the text and the publications are listed hereafter. For dated references, subsequent amendments to or revisions of any of these publications apply to this European Standard only when incorporated in it

22、by amendment or revision. For undated references the latest edition of the publication referred to applies. EN 132, Respiratory protective devices Definitions. EN 135, Respiratory protective devices List of equivalent terms. EN 136, Respiratory protective devices Full face masks Requirements, testin

23、g, marking. EN 137, Respiratory protective devices Self-contained open-circuit compressed air breathing apparatus Requirements, testing, marking. EN 138, Respiratory protective devices Fresh air hose breathing apparatus for use with full face mask, half mask or mouthpiece assembly Requirements, test

24、ing, marking. EN 139, Respiratory protective devices Compressed air line breathing apparatus with full face mask, half mask or mouthpiece assembly Requirements, testing, marking. EN 140, Respiratory protective devices Half masks and quarter masks Requirements, testing, marking. EN 141, Respiratory p

25、rotective devices Gas filters and combined filters Requirements, testing, marking. EN 142, Respiratory protective devices Mouthpiece assemblies Requirements, testing, marking. EN 143, Respiratory protective devices Particle filters Requirements, testing, marking. EN 145, Respiratory protective devic

26、es Self-contained closed-circuit breathing apparatus, compressed oxygen type Requirements, testing, marking. EN 146, Respiratory protective devices Powered filtering devices incorporating helmets or hoods Requirements, testing, marking. EN 147, Respiratory protective devices Power assisted filtering

27、 devices incorporating full face masks, half masks or quarter masks Requirements, testing, marking. EN 149, Respiratory protective devices Filtering half masks against particles Requirements, testing, marking. EN 250, Respiratory equipment Open-circuit self-contained compressed air diving apparatus

28、Requirements, testing, marking. EN 269, Respiratory protective devices Powered fresh air hose breathing apparatus incorporating a hood Requirements, testing, marking. EN 270, Respiratory protective devices Compressed air line breathing apparatus incorporating a hood Requirements, testing, marking. E

29、N 271, Respiratory protective devices Compressed air line or powered fresh air hose breathing apparatus incorporating a hood for use in abrasive blasting operations Requirements, testing, marking. EN 400, Respiratory protective devices for self-rescue Self-contained closed-circuit breathing apparatu

30、s Compressed oxygen escape apparatus Requirements, testing, marking. EN 401, Respiratory protective devices for self-rescue Self-contained closed-circuit breathing apparatus Chemical oxygen (KO 2 ) escape apparatus Requirements, testing, marking. EN 402, Respiratory protective devices for escape Sel

31、f-contained open-circuit compressed air breathing apparatus with full face mask or mouthpiece assembly Requirements, testing, marking. EN 403, Respiratory protective devices for self-rescue Filtering devices with hood for self-rescue from fire Requirements, testing, marking. EN 404, Respiratory prot

32、ective devices for self-rescue Filter self-rescuers Requirements, testing, marking. EN 405, Respiratory protective devices Valved filtering half masks to protect against gases or gases and particles Requirements, testing, marking.Page 4 EN 134:1998 BSI 1998 EN 1061, Respiratory protective devices fo

33、r self-rescue Self-contained closed-circuit breathing apparatus Chemical oxygen (NaClO 3 ) escape apparatus Requirements, testing, marking. EN 1146, Respiratory protective devices for self-rescue Self-contained open-circuit compressed air breathing apparatus incorporating a hood (compressed air esca

34、pe apparatus with hood) Requirements, testing, marking. prEN 1827, Respiratory protective devices Half masks without inhalation valves and with separable filters to protect against gases or gases and particles or particles only Requirements, testing, marking. prEN 1835, Respiratory protective device

35、s Light duty compressed air line breathing apparatus incorporating helmet or hood Requirements, testing, marking. prEN 12419, Respiratory protective devices Light duty compressed air line breathing apparatus incorporating full face masks, half masks or quarter masks Requirements, testing, marking.Pa

36、ge 5 EN 134:1998 BSI 1998 3 Nomenclature Nomenclature Benennungen 3.1 Facepieces Pie ces faciales Atemanschlu sse 3.1.1 Full face mask EN 136 Masque complet EN 136 Vollmaske EN 136 1 Faceblank 1 Jupe de masque 1 Maskenko rper 2 Facepiece seal 2 Joint facial 2 Maskendichtrahmen 3 Visor 3 Oculaire 3 S

37、ichtscheibe 4 Inner mask 4 Masque inte rieur 4 Innenmaske 5 Head harness 5 Jeu de brides 5 Kopfba nderung 6 Equipment connector 6 Raccord a le quipement 6 Gera teanschlustu ck 7 Exhalation valve 7 Soupape expiratoire 7 Ausatemventil 8 Check valve 8 Soupape inspiratoire du masque inte rieur 8 Steuerv

38、entil 9 Inhalation valve 9 Soupape inspiratoire 9 Einatemventil 10 Speech diaphragm 10 Membrane phonique 10 Sprechmembran 11 Neck strap, (carrying strap) 11 Bretelle de transport 11 Trageband 12 (Spectacles) 12 (Lunettes) 12 (Maskenbrille) 13 Filter 13 Filtre 13 Filter 14 Breathing hose 14 Tuyau res

39、piratoire 14 AtemschlauchPage 6 EN 134:1998 BSI 1998 3.1.2 Half mask or quarter mask EN 140 Demi-masque ou quart de masque EN 140 Halbmaske oder Viertelmaske EN 140 1 Faceblank 1 Jupe de masque 1 Maskenko rper 2 Head harness 2 Jeu de brides 2 Kopfba nderung 3 Exhalation valve 3 Soupape expiratoire 3

40、 Ausatemventil 4 Inhalation valve 4 Soupape inspiratoire 4 Einatemventil 5 Filter housing 5 Bo tier de filtre 5 Filteraufnahme 6 Equipment connector 6 Raccord a le quipement 6 Gera teanschlustu ck 7 Particle filter 7 Filtre a particules 7 Partikelfilter 8 Gas filter 8 Filtre anti-gaz 8 Gasfilter 9 P

41、refilter 9 Pre filtre 9 Vorfilter 10 Breathing hose 10 Tuyau respiratoire 10 Atemschlauch 11 Nosepiece 11 Pince nez 11 Nasenbu gelPage 7 EN 134:1998 BSI 1998 3.1.3 Mouthpiece assembly EN 142 Ensemble embout buccal EN 142 Mundstu ckgarnitur EN 142 for filtering devices and open-circuit breathing appa

42、ratus pour appareils filtrants et appareils a circuit ouvert fu r Filter-, Schlauch- und Beha ltergera te for closed-circuit breathing apparatus pour appareils a circuit fermef u r Regenerationsgera te 1 Mouthpiece body 1 Corps dembout buccal 1 Mundstu ckko rper 2 Equipment connector 2 Raccord a le

43、quipement 2 Gera teanschlustu ck 3 Mouthpiece 3 Embout buccal 3 Mundstu ck 4 Chin support 4 Mentonnie re 4 Kinnstu tze 5 Head harness 5 Jeu de brides 5 Kopfba nderung 6 Nose clip 6 Pince narines 6 Nasenklemme 7 Exhalation valve 7 Soupape expiratoire 7 Ausatemventil 8 Inhalation valve 8 Soupape inspi

44、ratoire 8 EinatemventilPage 8 EN 134:1998 BSI 1998 3.1.4 Hood, helmet or blouse EN 270, EN 271, prEN 1835 Cagoule, casque ou gilet EN 270, EN 271, prEN 1835 Haube, Helm oder Bluse EN 270, EN 271, prEN 1835 1 Hood, helmet or blouse 1 Cagoule, casque ou gilet 1 Haube, Helm oder Bluse 2 Visor 2 Oculair

45、e 2 Sichtscheibe 3 Breathing hose 3 Tuyau respiratoire 3 Atemschlauch 4 Exhalation valve 4 Soupape expiratoire 4 Ausatemventil 5 Compressed air supply tube 5 Tube dalimentation en air comprime 5 Druckluft-Zufu hrungsschlauch 6 Continuous flow valve 6 Robinet de re glage 6 Regelventil 7 Coupling 7 Ac

46、couplement 7 Verbindungsstu ck 8 Waist belt or carrying strap 8 Ceinture ou bretelle de transport 8 Leibgurt oder TragegurtPage 9 EN 134:1998 BSI 1998 3.2 Filtering devices Appareils filtrants Filtergera te Filtering devices consist either of a facepiece and filter(s) or of a filtering half mask. Th

47、ey may be unassisted, power assisted or powered. 3.2.1 Unassisted filtering devices Appareils filtrants non assiste s Filtergera te ohne Luftversorgung 3.2.1.1 Facepiece and filter Pie ce faciale et filtre Atemanschlu und Filter 1 Faceblank 1 Jupe de masque 1 Maskenko rper 2 Head harness 2 Jeu de br

48、ides 2 Kopfba nderung 3 Exhalation valve 3 Soupape expiratoire 3 Ausatemventil 4 Inhalation valve 4 Soupape inspiratoire 4 Einatemventil 5 Filter housing 5 Bo tier de filtre 5 Filteraufnahme 6 Equipment connector 6 Raccord a le quipement 6 Gera teanschlustu ck 7 Particle filter (EN 143) 7 Filtre a p

49、articules (EN 143) 7 Partikelfilter (EN 143) 8 Gas filter (EN 141) 8 Filtre anti-gaz (EN 141) 8 Gasfilter (EN 141) 9 Prefilter 9 Pre filtre 9 Vorfilter 10 Breathing hose 10 Tuyau respiratoire 10 Atemschlauch 11 Nosepiece 11 Pince nez 11 Nasenbu gelPage 10 EN 134:1998 BSI 1998 3.2.1.2 Filtering half mask EN 149, EN 405, prEN 1827 Demi-