BS EN 1362-1997 Identification card systems - Device interface characteristics - Classes of device interfaces《识别卡系统 装置界面特性 装置界面等级》.pdf

1、| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | BRITISH STANDARD BS EN 1362 : 1997 The Eur

2、opean Standard EN 1362 : 1997 has the status of a British Standard ICS 35.240.15 NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW Identification card systems Device interface characteristics Classes of device interfacesBS EN 1362 : 1997 This British Standard, having been prepar

3、ed under the direction of the DISC Board, was published under the authority of the Standards Board and comes into effect on 15 July 1997 BSI 1997 The following BSI references relate to the work on this standard: Committee reference IST/17 Draft for comment 94/643125 DC ISBN 0 580 27662 7 Amendments

4、issued since publication Amd. No. Date Text affected Committees responsible for this British Standard The preparation of this British Standard was entrusted to Technical Committee IST/17, Identification cards and related devices, upon which the following bodies were represented: APACS (Barclaycard)

5、APACS (Co-operative Bank) APACS (Lloyds Bank) APACS (Midland Bank) APACS (National Westminster Bank) Association for Payment Clearing Services (APACS) BT Laboratories Cellnet Consumer Policy Committee of BSI GPT Card Technology Mondex International Motorola Ltd. Rochford Thompson Equipment Shell UK

6、Stationery Office Thorn Transit Systems International Vodafone Ltd. Westinghouse Cubic Ltd.BS EN 1362 : 1997 BSI 1997 i Contents Page Committees responsible Inside front cover National foreword ii Foreword 2 Text of EN 1362 3ii BSI 1997 BS EN 1362 : 1997 National foreword This British Standard has b

7、een prepared by Technical Committee IST/17 and is the English language version of EN 1362 : 1997 Identification card systems Device interface characteristics Classes of device interfaces, published by the European Committee for Standardization (CEN). This British Standard is published under the dire

8、ction of the DISC Board whose Technical Committee IST/17 has the responsibility to: aid enquirers to understand the text; present to the responsible international/European committee any enquiries on interpretation, or proposals for change, and keep UK interests informed; monitor related internationa

9、l and European developments and promulgate them in the UK. Important note. EN 1362 : 1997 was produced as a result of international discussions by CEN Technical Committee TC 224 in which the UK took an active part. The UK voted against the draft of EN 1362 : 1997 on the basis that Technical Committe

10、e IST/17 could foresee no practical application for the standard. However, the terms of the UKs membership in CEN require BSI to publish this standard. Any enquiries about this British Standard should be directed to the Secretary of Technical Committee IST/17 at BSI. NOTE. International and European

11、 Standards, as well as overseas standards, are available from Customer Services, BSI, 389 Chiswick High Road, London, W4 4AL. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, p

12、ages i and ii, the EN title page, pages 2 to 14, an inside back cover and a back cover.CEN European Committee for Standardization Comite Europe en de Normalisation Europa isches Komitee fu r Normung Central Secretariat: rue de Stassart 36, B-1050 Brussels 1997 Copyright reserved to CEN members Ref.

13、No. EN 1362 : 1997 E EUROPEAN STANDARD EN 1362 NORME EUROPE ENNE EUROPA ISCHE NORM January 1997 ICS 35.240.15 Descriptors: Telecommunication, telecommunication terminals, magnetic cards, interfaces, characteristics, classifications, dimensions, messages, codification English version Identification c

14、ard systems Device interface characteristics Classes of device interfaces Syste mes de cartes didentification Caracte ristiques dinterface des terminaux Classes dinterfaces Identifikationskartensysteme Eigenschaften von Endgera teschnittstellen Schnittstellenklassen This European Standard was approv

15、ed by CEN on 1996-12-25. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national stand

16、ards may be obtained on application to the Central Secretariat or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to

17、the Central Secretariat has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.Page 2

18、 EN 1362 : 1997 BSI 1997 Foreword This European Standard has been prepared by Technical Committee CEN/TC 224, Machine-readable cards, related device interfaces and operations, the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either b

19、y publication of an identical text, or by endorsement, at the latest by July 1997, and conflicting national standards shall be withdrawn at the latest by July 1997. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to impleme

20、nt this European Standard: Austria, Belgium, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the United Kingdom. Contents Page Foreword 2 1 Scope 3 2 Normative references 3 3 Definitions and abbreviations 6

21、 3.1 Definitions 6 3.2 Abbreviations 7 4 Organization of interface characteristics 7 5 Card interface 7 5.1 Card interface: physical dimensions characteristics 7 5.2 Card interface: technology characteristics 8 5.3 Card interface: communication characteristics 8 5.4 Card interface: data characterist

22、ics 8 5.5 Basic card interface coding 8 6 Data communication interface 10 6.1 Data communication interface: physical characteristics 10 6.2 Data communication interface: technology characteristics 11 6.3 Data communication interface: communication characteristics 11 6.4 Data communication interface:

23、 message characteristics 12 6.5 Basic data communication interface coding 12 7 Security module interface 14 8 Human interface 14 Annex A (informative) Examples of interface coding 14 A.1 Case 1 14 A.2 Case 2 14Page 3 EN 1362 : 1997 BSI 1997 1 Scope This European Standard specifies mandatory and opti

24、onal interfaces between devices and machine readable cards, as well as other interfaces only to the extent that they are related to the processing of the machine readable card. It specifies the characteristics of each particular interface, and provides the means, through the use of bitmap coding, of

25、 readily identifying the capabilities of devices in order to ensure the compatibility between specific devices and cards. As far as technical specifications are concerned, it refers to other existing standards. 2 Normative references This European Standard incorporates by dated or undated reference,

26、 provisions from other publications. These normative references are cited at the appropriate places in the text and the publications are listed hereafter. For dated references, subsequent amendments to or revisions of any of these publications apply to this European Standard only when incorporated i

27、n it by amendment or revision. For undated references the latest edition of the publication referred to applies. EN 726-2 Identification card systems Telecommunications integrated circuit(s) cards and terminals Part 2: Security framework EN 726-3 Identification card systems Telecommunications integr

28、ated circuit(s) cards and terminals Part 3: Application independent card requirements EN 726-4 Identification card systems Telecommunications integrated circuit(s) cards and terminals Part 4: Application independent card related terminal requirements prEN 753-1 Identification card systems Intersecto

29、r thin flexible cards Part 1: General technical specifications prEN 753-2 Identification card systems Intersector thin flexible cards Part 2: Magnetic recording technique EN ISO/IEC 10536-1 Identification cards Contactless integrated circuit(s) cards Part 1: Physical characteristics (ISO/IEC 10536-1

30、 : 1992) EN 24909 Bank cards Magnetic stripe data content for track 3 (ISO 4909 : 1987) EN 27810 Identification cards Physical characteristics (ISO 7810 : 1985) EN 27811-2 Identification cards Recording technique Part 2: Magnetic stripe (ISO 7811-2 : 1988) EN 27811-4 Identification cards Recording t

31、echnique Part 4: Location of read-only magnetic tracks Tracks 1 and 2 (ISO 7811-4 : 1985) EN 27811-5 Identification cards Recording technique Part 5: Location of read-write magnetic track Track 3 (ISO 7811-5 : 1985) EN 27813 Identification cards Financial transaction cards (ISO 7813 : 1990) EN 27816

32、-1 : 1989 Identification cards Integrated circuit(s) cards with contacts Part 1: Physical characteristics (ISO 7816-1 : 1987) EN 27816-2 : 1989 Identification cards Integrated circuit(s) cards with contacts Part 2: Dimension and location of the contacts (ISO 7816-2 : 1988) EN 27816-3 : 1992 Identifi

33、cation cards Integrated circuit(s) cards with contacts Part 3: Electronic signals and transmission protocols (ISO/IEC 7816-3 : 1989) EN 28583 Financial transaction card originated messages Interchange message specification (ISO 8583 : 1993) ENV 1375-1 Identification card systems Intersector integrat

34、ed circuit(s) card additional format Part 1: ID-000 card size and physical characteristics prENV 1375-2 Identification card systems Intersector integrated circuit(s) card additional format Part 2: ID-00 card size and physical characteristics ETS 300 115 Attachments to the Public Switched Telephone N

35、etwork (PSTN); Category II attachment requirements for 300 bits per second duplex modems standardized for use on the PSTN (NET 21)Page 4 EN 1362 : 1997 BSI 1997 ETS 300 116 Attachments to the Public Switched Telephone Network (PSTN); Category II attachment requirements for 1200 bits per second duple

36、x modems standardized for use on the PSTN (NET 22) ETS 300 117 Attachments to the Public Switched Telephone Network (PSTN); Category II attachment requirements for 2400 bits per second duplex modems standardized for use on the PSTN (NET 23) ETS 300 118 Attachments to the Public Switched Telephone Ne

37、twork (PSTN); Category II attachment requirements for 1200 bits per second half duplex and 1200/75 bits per second asymmetrical duplex modems standardized for use on the PSTN (NET 24) ETS 300 175-2 Radio Equipment and systems (RES) Digital European Cordless Telecommunications (DECT) Common Interface

38、 Part 2: Physical layer ETS 300 175-3 Radio Equipment and systems (RES) Digital European Cordless Telecommunications (DECT) Common Interface Part 3: Medium access control layer ETS 300 175-4 Radio Equipment and systems (RES) Digital European Cordless Telecommunications (DECT) Common Interface Part 4

39、: Data link control layer ETS 300 175-5 Radio Equipment and systems (RES) Digital European Cordless Telecommunications (DECT) Common Interface Part 5: Network layer ETS 300 175-9 Radio Equipment and systems (RES) Digital European Cordless Telecommunications (DECT) Common Interface Part 9: Public acc

40、ess profile ETS 300 331 Radio Equipment and systems (RES) Digital European Cordless Telecommunications (DECT) authentication module specifications I-ETS 300 021 European digital cellular telecommunication system (Phase 1) Mobile Station Base Station System (MS-BSS) interface data link layer specific

41、ation (GSM 04.06) I-ETS 300 022-1 European digital cellular telecommunications system (Phase 1) Mobile radio interface layer 3 specification (GSM 04.08) I-ETS 300 022-2 European digital cellular telecommunications system (Phase 1) Mobile radio interface layer 3 specification Part 2: DCS extension (G

42、SM 04.08-DCS) I-ETS 300 023 European digital cellular telecommunications system (Phase 1) Point-to-point short message service support on mobile radio interface (GSM 04.11) I-ETS 300 024 European digital cellular telecommunications system (Phase 1) Short Message Service Cell Broadcast (SMSCB) suppor

43、t on the mobile radio interface (GSM 04.12) I-ETS 300 025 European digital cellular telecommunications system (Phase 1) Rate adaptation on the Mobile Station Base Station System (MS-BSS) interface (GSM 04.21) I-ETS 300 026 European digital cellular telecommunications system (Phase 1) Radio Link Prot

44、ocol (RLP) for data and telematic services on the Mobile Station Base Station System (MS-BSS) interface and the Base Station System Mobile Services Switching Centre (BSS-MSC) interface (GSM 04.22) I-ETS 300 027 European digital cellular telecommunications system (Phase 1) Mobile radio interface laye

45、r 3 supplementary services specifications Formats and coding (GSM 04.80) I-ETS 300 028 European digital cellular telecommunications system (Phase 1) Mobile radio interface layer 3 call offering supplementary services specification (GSM 04.82)Page 5 EN 1362 : 1997 BSI 1997 I-ETS 300 029 European digi

46、tal cellular telecommunications system (Phase 1) Mobile radio interface layer 3 restriction supplementary services specification (GSM 04.88) I-ETS 300 030 European digital cellular telecommunications system (Phase 1) Multiplexing and multiple access on the radio path (GSM 05.02) I-ETS 300 031 Europe

47、an digital cellular telecommunications system (Phase 1) Channel coding (GSM 05.03) I-ETS 300 032 European digital cellular telecommunications system (Phase 1) Modulation (GSM 05.04) I-ETS 300 033-1 European digital cellular telecommunications system (Phase 1) Radio transmission and reception (GSM 05

48、.05) I-ETS 300 033-2 European digital cellular telecommunications system (Phase 1) Radio transmission and reception Part 2: DCS extension (GSM 05.05-DCS) I-ETS 300 034-1 European digital cellular telecommunications system (Phase 1) Radio sub-system link control (GSM 05.08) I-ETS 300 034-2 European d

49、igital cellular telecommunications system (Phase 1) Radio sub-system link control Part 2: DCS extension (GSM 05.08-DCS) I-ETS 300 045-1 European digital cellular telecommunications system (Phase 1) Subscriber Identity Module Mobile Equipment (SIM-ME) interface specification (GSM 11.11) I-ETS 300 045-2 European digital cellular telecommunications system (Phase 1) Subscriber Identity Module