1、LPG equipment and accessories Transportable refillable welded steel cylinders for LPG Design and constructionBS EN 1442:2017BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 1442 May 2017 ICS 23.020.35 Supersedes EN
2、1442:2006+A1:2008English Version LPG equipment and accessories - Transportable refillable welded steel cylinders for LPG - Design and construction quipements pour GPL et leurs accessoires - Bouteilles en acier soud transportables et rechargeables pour gaz de ptrole liqufis (GPL) - Conception et fabr
3、ication Flssiggas-Gerte und Ausrstungsteile - Ortsbewegliche, wiederbefllbare, geschweite Flaschen aus Stahl fr Flssiggas (LPG) - Auslegung und Bau This European Standard was approved by CEN on 20 February 2017. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulat
4、e the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Stan
5、dard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the nat
6、ional standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Se
7、rbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 CEN All rights of exploitation in any form and b
8、y any means reserved worldwide for CEN national Members. Ref. No. EN 1442:2017 ENational forewordThis British Standard is the UK implementation of EN 1442:2017. It supersedes BS EN 1442:2006+A1:2008, which is withdrawn.The UK participation in its preparation was entrusted to Technical Committee PVE/
9、19, LPG containers and their associated fittings.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application.ISBN 978 0 580
10、 86581 7ICS 23.020.35Compliance with a British Standard cannot confer immunity from legal obligations. This British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 June 2017.Amendments/corrigenda issued since publicationDate Text affected BRITISH STAND
11、ARDBS EN 1442:2017EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 1442 May 2017 ICS 23.020.35 Supersedes EN 1442:2006+A1:2008English Version LPG equipment and accessories - Transportable refillable welded steel cylinders for LPG - Design and construction quipements pour GPL et leurs accessoires
12、 - Bouteilles en acier soud transportables et rechargeables pour gaz de ptrole liqufis (GPL) - Conception et fabrication Flssiggas-Gerte und Ausrstungsteile - Ortsbewegliche, wiederbefllbare, geschweite Flaschen aus Stahl fr Flssiggas (LPG) - Auslegung und Bau This European Standard was approved by
13、CEN on 20 February 2017. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national stand
14、ards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and no
15、tified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary,
16、Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-C
17、ENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 1442:2017 EBS EN 1442:2017EN 1442:2017 (E) 2 Contents Page European foreword . 5 Introduction 6 1 Scope 7 2 Normative
18、references 7 3 Terms, definitions and symbols . 8 3.1 Terms and definitions . 8 3.2 Symbols . 9 4 Materials 10 5 Design . 11 5.1 General requirements 11 5.2 Calculation of cylindrical shell thickness 12 5.3 Design of torispherical and semi-ellipsoidal ends concave to pressure 12 5.4 Design of ends o
19、f shapes other than torispherical and semi-ellipsoidal . 16 5.5 Minimum wall thickness 16 5.6 Design of openings . 17 5.7 Valve protection . 17 5.8 Non-pressure containing attachments . 17 5.9 Over-moulded cylinders 17 6 Construction and workmanship . 17 6.1 General . 17 6.2 Welding qualification .
20、18 6.3 Plates and formed parts . 18 6.4 Welded joints . 18 6.5 Tolerances 20 6.5.1 Out-of-roundness . 20 6.5.2 Straightness 20 6.5.3 Verticality 20 6.6 Closure of openings . 20 6.7 Heat treatment 20 7 Tests and examinations . 21 7.1 General . 21 7.2 Types of test and evaluation of test results 21 7.
21、3 Test specimens and related tests and examinations 22 7.3.1 All cylinders . 22 7.3.2 Two-piece cylinders 22 7.3.3 Three-piece cylinders . 23 7.3.4 Valve boss welds . 25 7.4 Tensile test . 25 7.4.1 Parent metal . 25 7.4.2 Welds 25 7.5 Bend test 25 7.5.1 Procedure 25 7.5.2 Requirements 26 BS EN 1442:
22、2017EN 1442:2017 (E) 3 7.6 Burst test under hydraulic pressure . 28 7.6.1 Procedure 28 7.6.2 Requirements . 28 7.7 Pressure test . 29 7.7.1 Procedure 29 7.7.2 Requirements . 29 7.8 Radiographic examination 30 7.8.1 Procedure 30 7.8.2 Assessment 31 7.8.3 Requirements . 31 7.9 Macro examination 31 7.9
23、.1 Procedure 31 7.9.2 Requirement . 31 7.10 Visual examination of the surface of the weld . 32 7.10.1 Procedure 32 7.10.2 Requirements . 32 7.11 Fatigue test 32 7.11.1 Procedure 32 7.11.2 Requirements . 32 8 Technical requirements for type approval . 32 8.1 General . 32 8.2 Extent of testing . 33 8.
24、3 Cylinder types 33 8.4 Type approval certificate . 34 9 Initial inspection and tests 34 9.1 Tests and examinations applicable to all cylinders . 34 9.2 Radiographic examination 34 9.3 Macro examination 35 9.4 Examination of valve boss weld 35 9.5 Examination of non-pressure containing attachment we
25、lds 35 9.6 Unacceptable imperfections found by the radiographic or macro examinations 35 9.7 Production batch testing (mechanical / burst tests) . 35 9.7.1 Production batch 35 9.7.2 Inspection lots 36 9.7.3 Rate of sampling 36 9.7.4 Verification of conformance with type approval 37 9.8 Failure to me
26、et mechanical and burst test requirements . 37 9.8.1 Mechanical 37 9.8.2 Burst 38 9.8.3 Production batch retest 38 9.8.4 Resubmission of a production batch . 38 9.8.5 Weld repairs . 38 10 Marking 39 11 Documentation 39 12 Certificate 39 Annex A (normative) Standard specific marking . 40 Annex B (nor
27、mative) Over-moulded cylinders . 41 B.1 Over-moulded cylinder case design . 41 B.2 Tests and examinations 41 BS EN 1442:2017EN 1442:2017 (E) 4 B.2.1 General . 41 B.2.2 Types of additional test and evaluation of results . 42 B.2.3 Coated cylinder - resistance to external corrosion 42 B.2.3.1 Procedur
28、e 42 B.2.3.2 Requirements 42 B.2.4 Over-moulding adhesion test procedure 44 B.2.4.1 General . 44 B.2.4.2 Preparation 44 B.2.4.3 Breaking strength 44 B.2.4.4 Results 44 B.2.4.5 Test report 44 B.2.4.6 Requirements 45 B.2.5 Over-moulding material requirements . 45 B.2.6 Additional technical requirement
29、s for type approval 46 B.2.7 Additional initial inspection and tests . 46 B.2.7.1 Production adhesion test for over-moulded cylinders 46 B.2.7.2 Production water absorption test 47 B.3 Over-moulded cylinder identification system . 47 B.3.1 Requirements 47 B.4 Certification 48 Annex C (informative) E
30、xample of over-moulded cylinder . 49 Bibliography . 50 BS EN 1442:2017EN 1442:2017 (E) 5 European foreword This document (EN 1442:2017) has been prepared by Technical Committee CEN/TC 286 “LPG equipment and accessories”, the secretariat of which is held by NSAI. This European Standard shall be given
31、 the status of a national standard, either by publication of an identical text or by endorsement, at the latest by November 2017, and conflicting national standards shall be withdrawn at the latest by November 2017. Attention is drawn to the possibility that some of the elements of this document may
32、 be the subject of patent rights. CEN shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 1442:2006+A1:2008. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association. All stage
33、s of the manufacture, distribution and disposal of these cylinders may have an effect on the environment. CEN/TS 16765 1 sets out environmental considerations for this European Standard. This European Standard has been submitted for reference into the RID 4 and/or in the technical annexes of the ADR
34、 5. Therefore the standards listed in the normative references and covering basic requirements of the RID/ADR not addressed within the present standard are normative only when the standards themselves are referred to in the RID 4 and/or in the technical annexes of the ADR 5. NOTE These regulations t
35、ake precedence over any clause of this European Standard. It is emphasized that RID/ADR are being revised regularly at intervals of two years which may lead to temporary non-compliances with the clauses of this European Standard. This European Standard has been extensively re-formatted to align with
36、 other more recent LPG cylinder standards. The main technical changes include: the inclusion of over-moulded cylinders; and re-establishing 50 bar as the minimum burst pressure. According to the CEN-CENELEC Internal Regulations, the national standards organisations of the following countries are bou
37、nd to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portuga
38、l, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 1442:2017EN 1442:2017 (E) 6 Introduction This European Standard calls for the use of substances and procedures that may be injurious to health if adequate precautions are not taken. It refers onl
39、y to technical suitability and does not absolve the user from legal obligations relating to health and safety at any stage. It has been assumed in the drafting of this European Standard that the execution of its provisions is entrusted to appropriately qualified and experienced people. All pressures
40、 are gauge pressures unless otherwise stated. NOTE This European Standard requires measurement of material properties, dimensions and pressures. All such measurements are subject to a degree of uncertainty due to tolerances in measuring equipment, etc. It may be beneficial to refer to the leaflet “m
41、easurement uncertainty leaflet (SP INFO 2000 27 uncertainty pdf)” 7. BS EN 1442:2017EN 1442:2017 (E) 7 1 Scope This European Standard specifies the minimum requirements for the design, construction and testing during manufacture of transportable refillable welded steel Liquefied Petroleum Gas (LPG)
42、cylinders, of water capacity from 0,5 l up to and including 150 l. This European Standard applies only to cylinders having a circular cross-section. Cylinders designed and constructed to the requirements of this European Standard may be over-moulded; additional requirements for these cylinders are s
43、et out in Annex B. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (
44、including any amendments) applies. EN 10120, Steel sheet and strip for welded gas cylinders EN 10204, Metallic products - Types of inspection documents EN 147841, Non-destructive testing - Industrial computed radiography with storage phosphor imaging plates - Part 1: Classification of systems EN 147
45、842, Non-destructive testing - Industrial computed radiography with storage phosphor imaging plates - Part 2: General principles for testing of metallic materials using X-rays and gamma rays EN 14894, LPG equipment and accessories - Cylinder and drum marking EN ISO 14245, Gas cylinders - Specificati
46、ons and testing of LPG cylinder valves - Self-closing (ISO 14245) EN ISO 15995, Gas cylinders - Specifications and testing of LPG cylinder valves - Manually operated (ISO 15995) EN ISO 643, Steels - Micrographic determination of the apparent grain size (ISO 643) EN ISO 2409, Paints and varnishes - C
47、ross-cut test (ISO 2409) EN ISO 2812-2, Paints and varnishes - Determination of resistance to liquids - Part 2: Water immersion method (ISO 2812-2) EN ISO 3231:1997, Paints and varnishes - Determination of resistance to humid atmospheres containing sulfur dioxide (ISO 3231:1993) EN ISO 4136, Destruc
48、tive tests on welds in metallic materials - Transverse tensile test (ISO 4136) EN ISO 4624, Paints and varnishes - Pull-off test for adhesion (ISO 4624) EN ISO 5173, Destructive tests on welds in metallic materials - Bend tests (ISO 5173) EN ISO 5817, Welding - Fusion-welded joints in steel, nickel,
49、 titanium and their alloys (beam welding excluded) - Quality levels for imperfections (ISO 5817) EN ISO 6520-1, Welding and allied processes - Classification of geometric imperfections in metallic materials - Part 1: Fusion welding (ISO 6520-1) BS EN 1442:2017EN 1442:2017 (E) 8 EN ISO 6892-1, Metallic materials - Tensile testing - Part 1: Method of test at room temperature (ISO 6892-1) EN ISO 9227, Corrosion tests in artificial atmospheres - Salt spray tests (ISO 9227) EN ISO 9606-1, Qualification testing of welders - Fusion weldi
copyright@ 2008-2019 麦多课文库（www.mydoc123.com）网站版权所有
备案/许可证编号：苏ICP备17064731号-1