1、BS EN1474-2:2008ICS 75.200NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBRITISH STANDARDInstallation andequipment forliquefied natural gas Design and testingof marine transfersystemsPart 2: Design and testing of transferhosesLicensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDAR
2、DS, 25/06/2009 03:23, Uncontrolled Copy, (c) BSIThis British Standardwas published under theauthority of the StandardsPolicy and StrategyCommittee on 31 March2009 BSI 2009ISBN 978 0 580 57977 6Amendments/corrigenda issued since publicationDate CommentsBS EN 1474-2:2008National forewordThis British S
3、tandard is the UK implementation of EN 1474-2:2008.The UK participation in its preparation was entrusted to TechnicalCommittee GSE/38, Installation and equipment for LNG.A list of organizations represented on this committee can be obtained onrequest to its secretary.This publication does not purport
4、 to include all the necessary provisionsof a contract. Users are responsible for its correct application.Compliance with a British Standard cannot confer immunityfrom legal obligations.Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 25/06/2009 03:23, Uncontrolled Copy, (c) BSIBS EN 1474-2:200
5、8EUROPEAN STANDARDNORME EUROPENNEEUROPISCHE NORMEN 1474-2December 2008ICS 75.200English VersionInstallation and equipment for liquefied natural gas - Design andtesting of marine transfer systems - Part 2: Design and testing oftransfer hosesInstallations et quipements de gaz naturel liqufi -Conceptio
6、n et essais des systmes de transfert marins -Partie 2: Conception et essais des tuyaux de transfertAnlagen und Ausrstung fr Flssigerdgas - Auslegung undPrfung von Schiffsbergabesystemen - Teil 2: Auslegungund Prfung von bergabeschluchenThis European Standard was approved by CEN on 1 November 2008.CE
7、N members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on appli
8、cation to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has
9、 the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portug
10、al,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMIT EUROPEN DE NORMALISATIONEUROPISCHES KOMITEE FR NORMUNGManagement Centre: rue de Stassart, 36 B-1050 Brussels 2008 CEN All rights of exploitation in any form and by any means rese
11、rvedworldwide for CEN national Members.Ref. No. EN 1474-2:2008: ELicensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 25/06/2009 03:23, Uncontrolled Copy, (c) BSIBS EN 1474-2:2008EN 1474-2:2008 (E) 2 Contents Page Foreword4 1 Scope 5 2 Normative references 5 3 Terms, definitions and abbreviations5
12、 4 Description of typical LNG transfer hose designs and accessories6 4.1 A LNG transfer hose system shall consist of the following6 4.1.1 A flexible hose assembly, comprising.6 4.1.2 Connection system to LNGC6 4.1.3 Emergency release system.6 4.1.4 Handling7 4.1.5 Power systems.7 4.1.6 Leak detectio
13、n, monitoring and alarm systems .7 4.2 Typical construction of LNG transfer hoses.7 4.2.1 Main hose categories 7 4.2.2 Corrugated metal hoses7 4.2.3 Composite hoses.9 5 Design features of the LNG transfer hoses and transfer hoses assemblies.10 5.1 General10 5.2 Application data required .10 5.3 Sele
14、ction of hose length .10 5.4 Service life 11 5.5 Selection of hose size .11 5.6 Selection of buoyancy.11 5.7 Selection of insulation 11 5.8 Basic design parameters 11 5.9 Component details End fitting.11 5.9.1 General11 5.9.2 Termination 12 5.9.3 Connector .13 5.9.4 Bending stiffener/restrictor (opt
15、ional).13 5.10 Hose handling / lifting device.13 5.11 Safety systems.13 5.12 Connection to the ship14 5.13 Hydraulic and electric control systems.14 6 Inspection and tests 14 6.1 Foreword.14 6.2 Laboratory testing .15 6.3 Prototype hose testing15 6.4 Factory acceptance tests18 6.4.1 General18 6.4.2
16、All hoses .18 6.4.3 FAT tests on one hose per order .18 6.5 System testing .18 7 Quality assurance and control .18 7.1 General18 7.2 Material selection.18 7.3 Marking .19 7.4 Manufacturing 19 7.5 Documentation related to an approved certification process: .19 Licensed Copy: Wang Bin, ISO/EXCHANGE CH
17、INA STANDARDS, 25/06/2009 03:23, Uncontrolled Copy, (c) BSIBS EN 1474-2:2008EN 1474-2:2008 (E) 3 8 Documentation.19 8.1 For information a purchasing guidelines table is given in Annex A19 8.2 As-built documentation.19 8.3 Operation manual 20 Annex A (informative) Purchasing guidelines table 21 Annex
18、 B (normative) Prototype and factory acceptance tests for LNG hose assemblies27 Annex C (informative) Surge pressure considerations for LNG hoses.29 Bibliography31 Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 25/06/2009 03:23, Uncontrolled Copy, (c) BSIBS EN 1474-2:2008EN 1474-2:2008 (E) 4
19、 Foreword This document (EN 1474-2:2008) has been prepared by Technical Committee CEN/TC 282 “Installation and equipment for LNG”, the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endo
20、rsement, at the latest by June 2009, and conflicting national standards shall be withdrawn at the latest by June 2009. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifyin
21、g any or all such patent rights. This European Standard consists of 3 parts: EN 1474-1: Installation and equipment for liquefied natural gas Design and testing of marine transfer systems Part 1: Design and testing of transfer arms EN 1474-2: Installation and equipment for liquefied natural gas Desig
22、n and testing of marine transfer systems Part 2: Design and testing of transfer hoses EN 1474-3, Installation and equipment for liquefied natural gas Design and testing of marine transfer systems Part 3: Offshore transfer systems According to the CEN/CENELEC Internal Regulations, the national standa
23、rds organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Por
24、tugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 25/06/2009 03:23, Uncontrolled Copy, (c) BSIBS EN 1474-2:2008EN 1474-2:2008 (E) 5 1 Scope This European Standard gives general guidelines for the design, material
25、 selection, qualification, certification, and testing details for Liquefied Natural Gas (LNG) transfer hoses for offshore transfer or on coastal weather-exposed facilities for aerial, floating and submerged configurations or a combination of these. Whilst this European Standard is applicable to all
26、LNG hoses, it is acknowledged that there may be further specific requirements for floating and submerged hoses. The transfer hoses will be designed to be part of transfer systems (it means that they will be fitted with ERS, QCDC, handling systems, hydraulic and electric components etc.) To avoid unn
27、ecessary repetition, cross-references to EN 1474-1 and EN 1474-3, are made for all compatible items, and for references, definitions and abbreviations. Where additional references, definitions and abbreviations are required specifically for LNG hoses, they are listed in this European Standard. Trans
28、fer hoses need to be durable when operating in the marine environment and to be flexible with a minimum bending radius compatible with handling and the operating requirements of the transfer system. 2 Normative references The following referenced documents are indispensable for the application of th
29、is document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 1474-1:2008, Installation and equipment for liquefied natural gas Design and testing of marine transfer systems Part 1: Desi
30、gn and testing of transfer arms EN 1474-3:2008, Installation and equipment for liquefied natural gas Design and testing of marine transfer systems Part 3: Offshore transfer systems EN ISO 1746, Rubber or plastic hoses and tubings Bending tests (ISO 1746:1998, including technical corrigendum 1:1999)
31、EN ISO 7369, Pipework Metal hoses and hoses assemblies Vocabulary (ISO 7369:2004) EN ISO 8330, Rubber and plastic hoses and hoses assemblies Vocabulary (ISO 8330:2007) EN ISO 9000, Quality management systems Fundamentals and vocabulary (ISO 9000:2005) EN ISO 9001, Quality management system Requireme
32、nts (ISO 9001:2000) 3 Terms, definitions and abbreviations For the purposes of this document, the terms and definitions given in EN ISO 7369 and EN ISO 8330 apply. NOTE 1 Exception to the above: for this document, the bending radii are measured from the centre line. NOTE 2 For the purpose of this do
33、cument hose assembly means the hose complete with end fittings, hose handling and lifting devices (pad eyes, collars, ), as described in 4.1.1. NOTE 3 For the purpose of this document, MAWP is defined in Clause 6 and Annex C. NOTE 4 For the purpose of this document, D and ND are defined in Clause 6.
34、 Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 25/06/2009 03:23, Uncontrolled Copy, (c) BSIBS EN 1474-2:2008EN 1474-2:2008 (E) 6 3.1 owner (or designated agent) company or group of companies for whose use the hose assembly as defined in 4.1.1 is provided 3.2 vendor company selling the hose
35、assembly to the owner, and in charge of completing the hose assembly as defined in 4.1.1 4 Description of typical LNG transfer hose designs and accessories 4.1 A LNG transfer hose assembly shall consist of the following 4.1.1 A flexible hose assembly, comprising flexible hose, refer to 4.2; associat
36、ed end terminations and connectors; permanent identification marks; hose handling device(s) (padeye or lifting lugs, lifting collar, ), and if required: leak detection system; insulation system (to minimize build up of external ice); intermediate leak barrier(s); bending stiffeners or restrictors; b
37、uoyancy. 4.1.2 Connection system to LNGC Hose extremity connector flanges shall permit the mounting of a QCDC or a spool piece or permit direct connection to LNGC or LNG terminal or another hose assembly. (A description of QCDC is given in EN 1474-1, for transfer system reference is made to EN 1474-
38、3). Hubs, or other connectors if equivalent or superior to flanges, may be used if agreed between owner and vendor. 4.1.3 Emergency release system Hose extremity connector shall permit the mounting of an emergency release system with valves and ERC (Emergency Release Coupler). (A description of emer
39、gency release system is given in EN 1474-1 and EN 1474-3). Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 25/06/2009 03:23, Uncontrolled Copy, (c) BSIBS EN 1474-2:2008EN 1474-2:2008 (E) 7 4.1.4 Handling Hose shall include necessary fittings for safe handling, coupling and uncoupling either f
40、rom the LNGC or the onshore or offshore LNG terminal system as required by the system design (refer to EN 1474-3). 4.1.5 Power systems Hose may support (e.g. piggy back mounted) hydraulic or pneumatic hoses, electric cables for the powering of the ERS and QCDC systems (refer to EN 1474-1:2008, Claus
41、e 6). 4.1.6 Leak detection, monitoring and alarm systems If required by the owner the hose shall incorporate leak detection system e.g. gaseous nitrogen bleeding in the annular space (see 5.11). 4.2 Typical construction of LNG transfer hoses 4.2.1 Main hose categories At present LNG transfer hoses a
42、re categorized in two types according to their method of construction: those based on a reinforced corrugated metal hose construction, hereafter called corrugated metal hose; those based on a construction in which polymeric films and fabrics are entrapped between a pair of close wound helical wires,
43、 hereafter called composite hose; as the technology develops, other types of hose may become available and are also to be considered covered by this European Standard. 4.2.2 Corrugated metal hoses 4.2.2.1 Hose Inner layer The inner layer is made of stainless steel corrugations (sometimes called bell
44、ows). This ensures the inner leak-proofness of the structure, as well as sustaining the inner radial pressure. Armour layers (if required) These armour layers support the axial loading whilst providing an initial thermal insulation. Spiral layer (if required) This layer ensures that the armours rema
45、in in place, as well as providing some thermal insulation. Thermal insulation layers This layer (or series of layers) ensures that the inner temperature is conserved whilst preventing any build-up of ice on the exterior of the hose. Intermediate and outer leak-proof layers The intermediate sheath gi
46、ves the hose a double annulus, thus permitting the detection of any leak of LNG as soon as it may occur. The external sheath prevents any ingress of water from the exterior. Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 25/06/2009 03:23, Uncontrolled Copy, (c) BSIBS EN 1474-2:2008EN 1474-2:
47、2008 (E) 8 The hose assembly construction shall ensure that all materials are used within their individual range of temperature. Key 1 leakproof layer 2 insulation 3 leakproof layer 4 insulation 5 supporting layer 6 armouring 7 leakproof layer 8 corrugated inner pipe Figure 1 Typical hose assembly r
48、einforced corrugated metal hose family Depending on the design, the outer leak proof layer can be a corrugated stainless steel pipe similar to the inner pipe. In this case the annular gap between inner and outer pipe may be evacuated. The pressure supervision of this annular gap results in a leak de
49、tection of inner and outer pipe. The thermal insulation may be maintained by layers of super insulation inside the evacuated annular gap. Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 25/06/2009 03:23, Uncontrolled Copy, (c) BSIBS EN 1474-2:2008EN 1474-2:2008 (E) 9 Key 1 pumping port 2 armouring 3 corrugated outer pipe 4 corrugated inner pipe 5 super insulation vacuum 6 vacuum supervision leak detection Figure 2 Typical hose assembly Sketch of a LNG flexible ho
copyright@ 2008-2019 麦多课文库（www.mydoc123.com）网站版权所有
备案/许可证编号：苏ICP备17064731号-1