BS EN 1503-1-2000 Valves - Materials for bodies bonnets and covers - Steels specified in European Standards《阀门 阀门体、帽和盖用材料 欧洲标准中规定的钢材》.pdf

1、 | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | BRITISH STANDARD BS EN 1503-1:2000 The Eur

2、opean Standard EN 1503-1:2000 has the status of a British Standard ICS 23.060.01; 77.140.30 NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW Valves Materials for bodies, bonnets and covers Part 1: Steels specified in European StandardsThis British Standard, having been prepared

3、 under the direction of the Engineering Sector Committee, was published under the authority of the Standards Committee and comes into effect on 15 December 2000 BSI 12-2000 ISBN 0 580 36744 4 BS EN 1503-1:2000 Amendments issued since publication Amd. No. Date Comments National foreword This British

4、Standard is the official English language version of EN 1503-1:2000. The UK participation in its preparation was entrusted by Technical Committee PSE/7, Industrial valves, to Subcommittee PSE/7/1, Basic valves, which has the responsibility to: aid enquirers to understand the text; present to the res

5、ponsible European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. A list of organizations represented on this subcommittee can be obtained on request to

6、its secretary. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Standards Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Find” facility of the BSI

7、Standards Electronic Catalogue. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary o

8、f pages This document comprises a front cover, an inside front cover, the EN title page, pages 2 to 6, an inside back cover and a back cover. The BSI copyright notice displayed in this document indicates when the document was last issued.EUROPEANSTANDARD NORMEEUROPENNE EUROPISCHENORM EN15031 October

9、2000 ICS23.060.00;77.140.30 Englishversion ValvesMaterialsforbodies,bonnetsandcoversPart1: SteelsspecifiedinEuropeanStandards AppareilsderobinetterieMatriauxpourlescorps, chapeauxetcouverclesPartie1:Aciersspcifisdansles normeseuropennes ArmaturenWerkstoffefrGehuse,OberteileundDeckel Teil1:Sthle,diei

10、nEuropischenNormenfestgelegtsind ThisEuropeanStandardwasapprovedbyCENon6October2000. CENmembersareboundtocomplywiththeCEN/CENELECInternalRegulationswhichstipulatetheconditionsforgivingthisEurope an Standardthestatusofanationalstandardwithoutanyalteration.Uptodatelistsandbibliographicalreferencesconc

11、ernings uchnational standardsmaybeobtainedonapplicationtotheCentralSecretariatortoanyCENmember. ThisEuropeanStandardexistsinthreeofficialversions(English,French,German).Aversioninanyotherlanguagemadebytra nslation undertheresponsibilityofaCENmemberintoitsownlanguageandnotifiedtotheCentralSecretariat

12、hasthesamestatusast heofficial versions. CENmembersarethenationalstandardsbodiesofAustria,Belgium,CzechRepublic,Denmark,Finland,France,Germany,Greece, Iceland,Ireland,Italy,Luxembourg,Netherlands,Norway,Portugal,Spain,Sweden,SwitzerlandandUnitedKingdom. EUROPEANCOMMITTEEFORSTANDARDIZATION COMITEUROP

13、ENDENORMALISATION EUROPISCHESKOMITEEFRNORMUNG CentralSecretariat:ruedeStassart,36B1050Brussels 2000CEN Allrightsofexploitationinanyformandbyanymeansreserved worldwideforCENnationalMembers. Ref.No.EN15031:2000EPage2 EN15031:2000 Contents Foreword3 1 Scope 3 2 Normativereferences 3 3 Materials4Page3 E

14、N15031:2000 Foreword ThisEuropeanStandardhasbeenpreparedbyTechnicalCommitteeCEN/TC69“Industrialvalves“, thesecretariatofwhichisheldbyAFNOR. ThisEuropeanStandardshallbegiventhestatusofanationalstandard,eitherbypublicationofan identicaltextorbyendorsement,atthelatestbyApril2001,andconflictingnationals

15、tandardsshallbe withdrawnatthelatestbyApril2001. ThisEuropeanStandardhasbeenpreparedunderamandategiventoCENbytheEuropean CommissionandtheEuropeanFreeTradeAssociation.ThisEuropeanStandardisconsideredtobe asupportingstandardtothoseapplicationandproductstandardswhichinthemselvessupportan essentialsafet

16、yrequirementofaNewApproachDirectiveandwhichmakereferencetothisEuropean Standard. EN1503comprisesfourparts: Part1:SteelsspecifiedinEuropeanStandards; Part2:SteelsotherthanthosespecifiedinEuropeanStandards; Part3:CastironsspecifiedinEuropeanStandards; Part4:CopperalloysspecifiedinEuropeanStandards. Ac

17、cordingtotheCEN/CENELECInternalRegulations,thenationalstandardsorganizationsofthe followingcountriesareboundtoimplementthisEuropeanStandard:Austria,Belgium,Czech Republic,Denmark,Finland,France,Germany,Greece,Iceland,Ireland,Italy,Luxembourg, Netherlands,Norway,Portugal,Spain,Sweden,Switzerlandandth

18、eUnitedKingdom. 1Scope ThisEuropeanStandardlistssteelsforpressurecontainingvalvebodies,bonnetsandcoverswhich aregiveninEuropeanStandards. 2 Normativereferences ThisEuropeanStandardincorporatesbydatedorundatedreference,provisionsfromother publications.Thesenormativereferencesarecitedattheappropriatep

19、lacesinthetextandthe publicationsarelistedhereafter.Fordatedreferences,subsequentamendmentstoorrevisionsofany ofthesepublicationsapplytothisEuropeanstandardonlywhenincorporateinitbyamendmentsor revision.Forundatedreferences,thelatesteditionofthepublicationreferredtoapplies(including amendments). prE

20、N10921:1997,FlangesandtheirjointsCircularflangesforpipes,valves,fittingsand accessories,PNdesignatedPart1:Steelflanges. EN10025, HotrolledproductsofnonalloystructuralsteelsTechnicaldeliveryconditions(includes amendmentA1:1993) EN100271, DesignationsystemsforsteelsPart1:Steelnames,principalsymbols .P

21、age4 EN15031:2000 EN100272, DesignationsystemsforsteelsPart2:Numericalsystem. EN100282, FlatproductsmadeofsteelsforpressurepurposesPart2:Nonalloyandalloysteels withspecifiedelevatedtemperatureproperties. EN100283, Flatproductsmadeofsteelsforpressurepurposes Part3:Weldablefinegrainsteels, normalized.

22、 EN100284, FlatproductsmadeofsteelsforpressurepurposesPart4:Nickelalloysteelswith specifiedlowtemperatureproperties. EN100287, FlatproductsmadeofsteelsforpressurepurposesPart7:Stainlesssteels. EN102132, TechnicaldeliveryconditionsforsteelcastingsforpressurepurposesPart2:Steel gradesforuseatroomtempe

23、ratureandelevatedtemperatures. EN102133, TechnicaldeliveryconditionsforsteelcastingsforpressurepurposesPart3:Steel gradesforuseatlowtemperatures. EN102134, TechnicaldeliveryconditionsforsteelcastingsforpressurepurposesPart4:Austenitic andausteniticferriticsteelgrades. EN102222,Steelforgingsforpressu

24、repurposesPart2:Ferriticandmartensiticsteelswith elevatedtemperatureproperties. EN102223,SteelforgingsforpressurepurposesPart3:Nickelsteelswithspecifiedlow temperatureproperties. EN102224, SteelforgingsforpressurepurposesPart4:Weldeablefinegrainsteelswithhighproof strength. EN102225,Steelforgingsfor

25、pressurepurposesPart5:Austenitic,martensiticandaustenitic ferriticstainlesssteels. CR10260, DesignationsystemsforsteelsAdditionalsymbols. 3Materials ThematerialsshallbeasgiveninTables1,2and3.Thedesignationofmaterialsisgivenin accordancewithEN100271,EN100272andCR10260. Table1listsunalloyedsteels,Tabl

26、e2lowalloysteelsandTable3highalloysteels. Thematerialsshallbeusedwithinthelimitsspecifiedinthematerialstandards.Whenthemechanical propertiesareonlygivenforroomtemperaturethelimitsofuseshallbeasspecifiedintherelevant designstandards(thisrequirementwillbereplacedbyareferencetotheEuropeanStandardsabout

27、 shelldesignstrengthassoonasthesedocumentsarepublished). Fortheeasyuseofthisstandard,thematerialshavebeendividedintothreetemperaturerangesin accordancewithCR10260: R:Roomtemperature; H:Hightemperature; L:Lowtemperature.Page5 EN15031:2000 Table1Unalloyedsteels Forgings Castings Flatproducts Tube Bar

28、Line Grouping basedon R e N/mm 2 Rangeof application prEN 1092 1:1997 Material group EN 10222 Part Material grade Material number EN 10213 Part Material grade Material number EN 10028 Part Material grade Material number EN Part Material grade Material number EN Part Material grade Material number 1

29、235 R 1E0 a S235JR 1.0037 2 235 R 1E1 a S235JRG2 1.0038 3 235 R 2E0 2 GP240GR 1.0621 4 275 R 8E0 3 P275N 1.0486 5 355 R 1E1 a S355J2G3 1.0570 6 355 R 8E1 3 P355N 1.0562 7 235 H 3E0 2 P245GH 1.0352 2 GP240GH 1.0619 8 235 H 3E0 2 P265GH 1.0425 9 275 H 3E1 2 P280GH 1.0426 2 P295GH 1.0481 10 275 H 8E2 4

30、 P285NH 1.0477 3 P275NH 1.0487 11 355 H 8E3 4 P355NH 1.0565 3 P355NH 1.0565 12 235 L 7E0 3 G17Mn5 1.1131 13 275 L 7E0 3 G20Mn5 1.6220 3 P275NL1 1.0488 14 275 L 7E0 3 P275NL2 1.1104 15 355 L 7E1 3 P355NL1 1.0566 16 355 L 7E1 3 P355NL2 1.1106 a EN10025.Page6 EN15031:2000 Table2Lowalloysteels Forgings

31、Castings Flatproducts Tube Bar Line Groupingsbased onchemical composition Rangeof application prEN1092 1:1997 Material group EN 10222 Part Material grade Material number EN 10213 Part Material grade Material number EN10028 Part Material grade Material number EN Part Material grade Material number EN

32、 Part Materialgrade Material number C max /Mn max 1 0,16/1,2 H 2 0,20/1,4 H 3 0,16/1,5 H Cr max /Mo max 4 0/0,5 H 4E0 2 16Mo3 1.5415 2 G20Mo5 1.5419 2 16Mo3 1.5415 5 1,0/0,5 H 5EO 2 13CrMo45 1.7335 2 G17CrMo55 1.7357 2 13CrMo45 1.7335 6 2,25/1,0 H 6E0 2 11CrMo910 1.7383 2 G17CrMo910 1.7379 2 10CrMo9

33、10 1.7380 Ni 7 Ni 0,5 L 7E0 4 11MnNi53 1.6212 8 Ni 0,5 L 7E0 3 13MnNi63 1.6217 4 13MnNi63 1.6217 9 0,5 Ni 1,5 L 7E1 3 15NiMn6 1.6228 4 15NiMn6 1.6228 10 1,5 Ni 3,5 L 7E1 3 12Ni14 1.5637 3 G9Ni14 1.5638 4 12Ni14 1.5637 11 3,5 Ni 5,0 L 7E1 3 X12Ni5 1.5680 Table3Highalloysteels Forgings Castings Flatpr

34、oducts Tube Bar Line Groupingbased onchemical composition Rangeof application prEN 1092 1:1997 Material group EN10222 Part Materialgrade Material number EN10213 Part Materialgrade Material number EN 10028 Part Materialgrade Material number EN Part Material grade Material number EN Part Material grad

35、e Material number Ferritic 1 CrMo50,5 H 6E1 2 X16CrMo51 1.7366 2 GX15CrMo5 1.7365 2 CrMo121 H 9E0 2 X20CrMoV111 1.4922 2 GX23CrMoV121 1.4931 3 Ni9 L 7E2 3 X8Ni9 1.5662 4 X8Ni9 1.5662 Austenitic 4 CrNiL H 10E0 5 X2CrNi189 1.4307 4 GX2CrNi1911 1.4309 7 X2CrNi1911 1.4306 5 CrNi H 11E0 5 X5CrNi1810 1.43

36、01 4 GX5CrNi1910 1.4308 7 X5CrNi1810 1.4301 6 CrNiTi H 12E0 5 X6CrNiTi1810 1.4541 7 X6CrNiTi1810 1.4541 7 CrNiNb H 12E0 5 X6CrNiNb1810 1.4550 4 GX5CrNiNb1911 1.4552 7 X6CrNiNb1810 1.4550 8 CrNiMoL H 13E0 5 X2CrNiMo17122 1.4404 4 GX2CrNiMo19112 1.4409 7 X2CrNiMo17122 1.4404 9 CrNiMo H 14E0 5 X5CrNiMo

37、17122 1.4401 4 GX5CrNiMo19112 1.4408 7 X5CrNiMo17122 1.4401 10 CrNiMoTi H 15E0 5 X6CrNiMoTi17122 1.4571 7 X6CrNiMoTi17122 1.4571 11 CrNiMoNb H 15E0 4 GX5CrNiMoNb19112 1.4581 7 X6CrNiMoNb17122 1.4580 Austeniticferritic(Duplex) 12 CrNiMo2253 H 16E0 4 GX2CrNiMoCuN25633 1.4517 13 CrNiMo2574 H 16E0 4 GX2

38、CrNiMoN2674 1.4469 blankBS EN 1503-1:2000 BSI 389 Chiswick High Road London W4 4AL | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |

39、 | | | | | | | | | | | | | | | | | | BSI British Standards Institution BSI is the independent national body responsible for preparing British Standards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter. Revisions British Standards are

40、 updated by amendment or revision. Users of British Standards should make sure that they possess the latest amendments or editions. It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this Br

41、itish Standard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel: 020 8996 9000. Fax: 020 8996 7400. BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive t

42、he latest editions of standards. Buying standards Orders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel: 020 8996 9001. Fax: 020 8996 7001. In response to orders for international standards, it is BSI policy to supply the BSI implementatio

43、n of those that have been published as British Standards, unless otherwise requested. Information on standards BSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give details on all its products and services. Contact the Information Centre.