BS EN 1503-3-2000 Valves - Materials for bodies bonnets and covers - Cast irons specified in European Standards《阀门 阀门体 帽和盖用材料 欧洲标准中规定的铸铁》.pdf

1、BRITISH STANDARD BS EN 1503-3:2000 Incorporating Corrigendum No. 1 Valves Materials for bodies, bonnets and covers Part 3: Cast irons specified in European Standards The European Standard EN 1503-3:2000 has the status of a British Standard ICS 23.060.01; 77.080.10 BS EN 1503-3:2000 This British Stan

2、dard, having been prepared under the direction of the Engineering Sector Committee, was published under the authority of the Standards Committee and comes into effect on 15 December 2000 BSI 12 August 2003 ISBN 0 580 36746 0 National foreword This British Standard is the official English language ve

3、rsion of EN 1503-3:2000, including Corrigendum March 2001. The UK participation in its preparation was entrusted by Technical Committee PSE/7, Valves, to Subcommittee PSE/7/1, Valves Basic standards, which has the responsibility to: A list of organizations represented on this subcommittee can be obt

4、ained on request to its secretary. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility

5、 of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. a

6、id enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. Summary of pages T

7、his document comprises a front cover, an inside front cover, the EN title page, pages 2 to 4, an inside back cover and a back cover. The BSI copyright notice displayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No. Date Comments 14645 Corri

8、gendum No. 1 12 August 2003 Changes to Table 1 EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 1503-3 October 2000 ICS 23.060.00; 77.080.10 Incorporating corrigendum March 2001 English version Valves - Materials for bodies, bonnets and covers - Part 3: Cast irons specified in European Standards

9、 Appareils de robinetterie - Matriaux pour les corps, chapeaux et couvercles - Partie 3: Fontes spcifies dans les normes europennes Armaturen - Werkstoffe fr Gehuse, Oberteile und Deckel - Teil 3: Gueisen, das in Europischen Normen festgelegt ist This European Standard was approved by CEN on 6 Octob

10、er 2000. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obta

11、ined on application to the Central Secretariat or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secr

12、etariat has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom. EUROP

13、EAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Central Secretariat: rue de Stassart, 36 B-1050 Brussels 2000 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 1503-3:2000 EPage 2 EN 15

14、03-3:2000 Contents Page Foreword. 3 1 Scope. 4 2 Normative references. 4 3 Materials 4 Page 3 EN 1503-3:2000 Foreword This European Standard has been prepared by Technical Committee CEN/TC 69 “Industrial valves“, the secretariat of which is held by AFNOR. This European Standard shall be given the st

15、atus of a national standard, either by publication of an identical text or by endorsement, at the latest by April 2001, and conflicting national standards shall be withdrawn at the latest by April 2001. This European Standard has been prepared under a mandate given to CEN by the European Commission

16、and the European Free Trade Association. This European Standard is considered to be a supporting standard to those application and product standards which in themselves support an essential safety requirement of a New Approach Directive and which make reference to this European Standard. EN 1503 com

17、prises four parts : Part 1 : Steels specified in European Standards ; Part 2 : Steels other than those specified in European Standards ; Part 3 : Cast irons specified in European Standards ; Part 4 : Copper alloys specified in European Standards. According to the CEN/CENELEC Internal Regulations, th

18、e national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the United King

19、dom. Page 4 EN 1503-3:2000 1 Scope This European Standard lists cast irons for pressure containing valve bodies, bonnets and covers which are given in European Standards. 2 Normative references This European standard incorporates by dated or undated reference, provisions from other publications. The

20、se normative references are cited at the appropriate places in the text and the publications are listed hereafter. For dated references, subsequent amendments to or revisions of any of these publications apply to this European standard only when incorporate in it by amendments or revision. For undat

21、ed references, the latest edition of the publication referred to applies (including amendments). EN 545, Ductile iron pipes, fittings, accessories and their joints for water pipelines - Requirements and test methods. EN 1560, Founding - Designation system for cast iron - Material symbols and materia

22、l numbers. EN 1561, Founding - Grey cast irons. EN 1562, Founding - Malleable cast irons. EN 1563, Founding - Spheroidal graphite cast irons. 3 Materials The materials shall be as given in Table 1. The material designation is in accordance with EN 1560. When selecting materials according to this sta

23、ndard, the limits of use given in the material standards are to be taken into account. Table 1 - Cast irons Material designation Graphite structure EN R mN/mm 2Short name Number 200 EN-GJL-200 EN-JL1030 250 EN-GJL-250 EN-JL1040 300 EN-GJL-300 EN-JL1050 Grey cast iron 1561 350 EN-GJL-350 EN-JL1060 35

24、0 EN-GJS-350-22-LT EN-JS1015 350 EN-GJS-350-22-RT EN-JS1014 400 EN-GJS-400-18-LT EN-JS1025 400 EN-GJS-400-18-RT EN-JS1024 400 EN-GJS-400-15 EN-JS1030 450 EN-GJS-450-10 EN-JS1040 500 EN-GJS-500-7 EN-JS1050 1563 600 EN-GJS-600-3 EN-JS1060 Spheroidal graphite cast iron 545 400 - - 350 EN-GJMW-350-4 EN-

25、JM1010 400 EN-GJMW-400-5 EN-JM1030 300 EN-GJMB-300-6 EN-JM1110 Malleable cast iron 1562 350 EN-GJMB-350-10 EN-JM1130 blankBS EN 1503-3:2000 BSI 389 Chiswick High Road London W4 4AL BSI British Standards Institution BSI is the independent national body responsible for preparing British Standards. It

26、presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter. Revisions British Standards are updated by amendment or revision. Users of British Standards should make sure that they possess the latest amendments or editions. It is the constant aim o

27、f BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel: +44 (0)

28、20 8996 9000. Fax: +44 (0)20 8996 7400. BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards. Buying standards Orders for all BSI, international and foreign standards publications should be addressed to Cu

29、stomer Services. Tel: +44 (0)20 8996 9001. Fax: +44 (0)20 8996 7001. Email: ordersbsi-. Standards are also available from the BSI website at http:/www.bsi-. In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as Briti

30、sh Standards, unless otherwise requested. Information on standards BSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give det

31、ails on all its products and services. Contact the Information Centre. Tel: +44 (0)20 8996 7111. Fax: +44 (0)20 8996 7048. Email: infobsi-. Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of

32、these and other benefits contact Membership Administration. Tel: +44 (0)20 8996 7002. Fax: +44 (0)20 8996 7001. Email: membershipbsi-. Information regarding online access to British Standards via British Standards Online can be found at http:/www.bsi- Further information about BSI is available on th

33、e BSI website at http:/www.bsi-. Copyright Copyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the international standardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored

34、in a retrieval system or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI. This does not preclude the free use, in the course of implementing the standard, of necessary details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. Details and advice can be obtained from the Copyright & Licensing Manager. Tel: +44 (0)20 8996 7070. Fax: +44 (0)20 8996 7553. Email: copyrightbsi-.