BS EN 1504-4-2004 Products and systems for the protection and repair of concrete structures - Definitions requirements quality control and evaluation of conformity - Part 4 Structu.pdf

1、BRITISH STANDARD BS EN 1504-4:2004 Products and systems for the protection and repair of concrete structures Definitions, requirements, quality control and evaluation of conformity Part 4: Structural bonding The European Standard EN 1504-4:2004 has the status of a British Standard ICS 91.080.40 Lice

2、nsed Copy: Wang Bin, na, Mon Apr 04 03:08:43 BST 2005, Uncontrolled Copy, (c) BSIBS EN 1504-4:2004 This British Standard, was published under the authority of the Standards Policy and Strategy Committee on 26 January 2005 BSI 26 January 2005 ISBN 0 580 45355 3 National foreword This British Standard

3、 is the official English language version of EN 1504-4:2004. EN 1504-4 is a candidate “harmonized” European Standard and fully takes into account the requirements of the European Commission mandate M/128, Products related to concrete, mortar and grout, given under the EU Construction Products Direct

4、ive (89/106/EEC), and is intended to lead to CE marking. The date of applicability of EN 1504-4:2004 as a “harmonized” European Standard, i.e. the date after which this standard may be used for CE marking purposes, is subject to an announcement in the Official Journal of the European Communities. Th

5、e Commission in consultation with Member States has agreed a transition period for the co-existence of “harmonized” European Standards and their corresponding national standard(s). It is intended that this period will comprise a period, usually nine months, after the date of availability of the Euro

6、pean Standard, during which any required changes to national regulations are to be made, followed by a further period, usually of 12 months, for the implementation of CE marking. At the end of this co-existence period, the national standard(s) will be withdrawn. EN 1504-4:2004 is the subject of tran

7、sitional arrangements agreed under the Commission mandate. In the UK, there are no corresponding national standards of national origin. The UK participation in its preparation was entrusted by Technical Committee B/517, Concrete, to Subcommittee B/517/8, Protection and repair of concrete structures,

8、 which has the responsibility to: A list of organizations represented on this subcommittee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Catalogue under t

9、he section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct applica

10、tion. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; moni

11、tor related international and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the EN title page, pages 2 to 28, an inside back cover and a back cover. The BSI copyright notice displayed in this document indicates whe

12、n the document was last issued. Amendments issued since publication Amd. No. Date Comments Licensed Copy: Wang Bin, na, Mon Apr 04 03:08:43 BST 2005, Uncontrolled Copy, (c) BSIEUROPEANSTANDARD NORMEEUROPENNE EUROPISCHENORM EN15044 November2004 ICS91.080.40 Englishversion Productsandsystemsfortheprot

13、ectionandrepairofconcrete structuresDefinitions,requirements,qualitycontroland evaluationofconformityPart4:Structuralbonding Produitsetsystmespourlaprotectionetlarparationde structuresenbtonDfinitions,prescriptions,matrisede laqualitetvaluationdelaconformitPartie4:Collage structural ProdukteundSyste

14、mefrdenSchutzunddie InstandsetzungvonBetontragwerkenDefinitionen, Anforderungen,QualittsberwachungundBeurteilungder KonformittTeil4:KleberfrBauzwecke ThisEuropeanStandardwasapprovedbyCENon23April2004. CENmembersareboundtocomplywiththeCEN/CENELECInternalRegulationswhichstipulatetheconditionsforgiving

15、thisEurope an Standardthestatusofanationalstandardwithoutanyalteration.Uptodatelistsandbibliographicalreferencesconcernings uchnational standardsmaybeobtainedonapplicationtotheCentralSecretariatortoanyCENmember. ThisEuropeanStandardexistsinthreeofficialversions(English,French,German).Aversioninanyot

16、herlanguagemadebytra nslation undertheresponsibilityofaCENmemberintoitsownlanguageandnotifiedtotheCentralSecretariathasthesamestatusast heofficial versions. CENmembersarethenationalstandardsbodiesofAustria,Belgium,Cyprus,CzechRepublic,Denmark,Estonia,Finland,France, Germany,Greece,Hungary,Iceland,Ir

17、eland,Italy,Latvia,Lithuania,Luxembourg,Malta,Netherlands,Norway,Poland,Portugal, Slovakia, Slovenia,Spain,Sweden,SwitzerlandandUnitedKingdom. EUROPEANCOMMITTEEFORSTANDARDIZATION COMITEUROPENDENORMALISATION EUROPISCHESKOMITEEFRNORMUNG ManagementCentre:ruedeStassart,36B1050Brussels 2004CEN Allrightso

18、fexploitationinanyformandbyanymeansreserved worldwideforCENnationalMembers. Ref.No.EN15044:2004:E Licensed Copy: Wang Bin, na, Mon Apr 04 03:08:43 BST 2005, Uncontrolled Copy, (c) BSIEN 1504-4:2004 (E) 2 Contents Page Foreword3 1 Scope 5 2 Normative references 5 3 Terms and definitions .6 4 Performa

19、nce characteristics for intended uses .7 5 Requirements.9 6 Sampling.13 7 Evaluation of conformity.13 8 Marking and labelling 14 Annex A (informative) Special applications15 Annex B (informative) Release of dangerous substances16 Annex C (informative) Minimum frequency of testing for factory product

20、ion control.17 Annex ZA (informative) Clauses addressing the provisions of EU Construction Products Directive18 Licensed Copy: Wang Bin, na, Mon Apr 04 03:08:43 BST 2005, Uncontrolled Copy, (c) BSIEN 1504-4:2004 (E) 3 Foreword This document (EN 1504-4:2004) has been prepared by Technical Committee C

21、EN/TC 104 “Concrete and related products”, the secretariat of which is held by DIN. It has been developed by sub-committee 8 “Products and systems for the protection and repair of concrete structures” (Secretariat AFNOR). This European Standard shall be given the status of a national standard, eithe

22、r by publication of an identical text or by endorsement, at the latest by February 2005, and conflicting national standards shall be withdrawn at the latest by August 2006. This Part 4 of EN 1504 does not supersede any other document. This document has been prepared under a mandate given to CEN by t

23、he European Commission and the European Free Trade Association, and supports essential requirements of EU Construction Products Directive (89/106/EC). For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this document. This Part 4 of EN 1504 includes an Infor

24、mative Annex A dealing with special applications and an Informative Annex B dealing with release of dangerous substances. This Part of this European Standard is one of the Parts of this Standard on products and systems for the repair and protection of concrete structures, the other Parts are listed

25、below: EN 1504-1, Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 1: Definitions prEN 1504-2, Products and systems for the protection and repair of concrete structures - Definitions, requiremen

26、ts, quality control and evaluation of conformity - Part 2: Surface protection systems for concrete prEN 1504-3, Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 3: Structural and non-structural

27、repair prEN 1504-5, Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 5: Concrete injection prEN 1504-6, Products and systems for the protection and repair of concrete structures - Definitions, r

28、equirements, quality control and evaluation of conformity - Part 6: Anchoring of reinforcing steel bar prEN 1504-7, Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 7: Reinforcement corrosion pr

29、otection EN 1504-8 Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 8: Quality control and evaluation of conformity ENV 1504-9:, Products and systems for the protection and repair of concrete st

30、ructures - Definitions, Requirements, Quality control and evaluation of conformity - Part 9: General principles for the use of products and systems EN 1504-10, Products and systems for the protection and repair of concrete structures - Definitions, Requirements, Quality control and evaluation of con

31、formity - Part 10: Site application of products and systems and quality control of the works Licensed Copy: Wang Bin, na, Mon Apr 04 03:08:43 BST 2005, Uncontrolled Copy, (c) BSIEN 1504-4:2004 (E) 4 According to the CEN/CENELEC Internal Regulations, the national standards organizations of the follow

32、ing countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden,

33、 Switzerland and United Kingdom. Licensed Copy: Wang Bin, na, Mon Apr 04 03:08:43 BST 2005, Uncontrolled Copy, (c) BSIEN 1504-4:2004 (E) 5 1 Scope This Part 4 of EN 1504 specifies requirements for the identification, performance (including durability) and safety of structural bonding products and sy

34、stems to be used for the structural bonding of strengthening materials to an existing concrete structure, including: 1) The bonding of external plates of steel or other suitable materials (e.g. fibre reinforced composites) to the surface of a concrete structure for strengthening purposes, including

35、the laminating of plates in such applications. 2) The bonding of hardened concrete to hardened concrete, typically associated with the use of precast units in repair and strengthening. 3) The casting of fresh concrete to hardened concrete using an adhesive bonded joint where it forms a part of the s

36、tructure and is required to act compositely. The performance requirements in this Part of this Standard may not be applicable to highly specialised applications in extreme environmental conditions, e.g. cryogenic use, nor do they cover specialised circumstances such as accidental impact, e.g. due to

37、 traffic or ice, or earthquake loading where specific performance requirements will apply. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest editio

38、n of the referenced document (including any amendments) applies. EN 1504-1, Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 1: Definitions EN 1504-8, Products and systems for the protection and

39、 repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 8: Quality control and evaluation of conformity ENV 1504-9, Products and systems for the protection and repair of concrete structures - Definitions, Requirements, Quality control and evalu

40、ation of conformity - Part 9: General principles for the use of products and systems EN 1766, Products and systems for the protection and repair of concrete structures - Test methods - Reference concretes for testing EN 1767, Products and systems for the protection and repair of concrete structures

41、 Test methods - Infrared analysis EN 1770, Products and systems for the protection and repair of concrete structures - Test methods - Determination of the coefficient of thermal expansion EN 1799, Products and systems for the protection and repair of concrete structures - Test methods - Tests to me

42、asure the suitability of structural bonding agents for application to concrete surface EN 12188, Products and systems for the protection and repair of concrete structures - Test methods - Determination of adhesion steel-to-steel for characterisation of structural bonding agents EN 12189, Products an

43、d systems for the protection and repair of concrete structures - Test methods - Determination of open time Licensed Copy: Wang Bin, na, Mon Apr 04 03:08:43 BST 2005, Uncontrolled Copy, (c) BSIEN 1504-4:2004 (E) 6 EN 12190, Products and systems for the protection and repair of concrete structures - T

44、est methods - Determination of compressive strength of repair mortar EN 12192-2, Products and systems for the protection and repair of concrete structures - Granulometry analysis - Part 2: Test method for fillers for polymer bonding agents EN 12614, Products and systems for the protection and repair

45、 of concrete structures - Test methods - Determination of glass transition temperatures of polymers EN 12615, Products and systems for the protection and repair of concrete structures - Test methods - Determination of slant shear strength EN 12617-1, Products and systems for the protection and repai

46、r of concrete structures - Test methods - Part 1: Determination of linear shrinkage for polymers and surface protection systems (SPS) EN 12617-3, Products and systems for the protection and repair of concrete structures - Test methods - Part 3: Determination of early age linear shrinkage for structu

47、ral bonding agents EN 12618-2, Products and systems for the protection and repair of concrete structures - Test methods - Part 2: Determination of the adhesion of injection products, with our without thermal cycling - Adhesion by tensile bond strength EN 12636, Products and systems for the protectio

48、n and repair of concrete structures - Test methods - Determination of adhesion concrete to concrete EN 13412, Products and systems for the protection and repair of concrete structures - Test methods - Determination of modulus of elasticity in compression EN 13501-1, Fire classification of construction products and building elements - Part 1: Classification using test data from reaction to fire tests EN 13733, Products and systems for the protection and repair of concrete structures - Tests methods - Determination of t