BS EN 1563-2011 Founding Spheroidal graphite cast irons《铸造 球墨铸铁》.pdf

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationBS EN 1563:2011Founding Spheroidalgraphite cast ironsCopyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or netwo

2、rking permitted without license from IHS-,-,-BS EN 1563:2011 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN 1563:2011. Itsupersedes BS EN 1563:1997 which is withdrawn.The UK participation in its preparation was entrusted to TechnicalCommittee ISE/111, Steel Cas

3、tings and Forgings.A list of organizations represented on this committee can beobtained on request to its secretary.This publication does not purport to include all the necessaryprovisions of a contract. Users are responsible for its correctapplication. The British Standards Institution 2012ISBN 978

4、 0 580 70176 4ICS 77.080.10Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 31 January 2012.Amendments issued since publicationDate Text affectedCopyright European

5、Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 1563:2011EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 1563 December 2011 ICS 77.080.10 Supersedes EN 1563:1997English Version Founding

6、- Spheroidal graphite cast irons Fonderie - Fontes graphite sphrodal Gieereiwesen - Gusseisen mit Kugelgraphit This European Standard was approved by CEN on 12 November 2011. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this Euro

7、pean Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official version

8、s (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Be

9、lgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN CO

10、MMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2011 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 1563:2011: ECopyright European Comm

11、ittee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 1563:2011EN 1563:2011 (E) 2 Contents Page Foreword 3Introduction .41 Scope 52 Normative references 53 Terms and definitions .54 Designation 65 Orde

12、r information 76 Manufacture 77 Requirements .77.1 General 77.2 Ferritic to pearlitic spheroidal graphite cast irons .87.3 Solid solution strengthened ferritic spheroidal graphite cast irons . 118 Sampling 128.1 General . 128.2 Cast samples . 138.3 Samples cut from a casting . 149 Test methods . 199

13、.1 Tensile test 199.2 Impact test . 209.3 Hardness test 219.4 Graphite structure examination 2110 Retests . 2110.1 Need for retests. 2110.2 Test validity . 2210.3 Non-conforming test results 2210.4 Heat treatment of samples and castings 2211 Inspection documentation . 22Annex A (informative) Additio

14、nal information on solid solution strengthened ferritic spheroidal graphite cast irons 23Annex B (informative) Guidance values for mechanical properties measured on test pieces machined from samples cut from the castings . 27Annex C (informative) Guidance values for hardness 29Annex D (informative)

15、Nodularity . 31Annex E (informative) Additional information on mechanical and physical properties . 32Annex F (informative) Fracture toughness, impact energy and ductility of spheroidal graphite cast irons . 34Annex G (normative) Sectioning procedure for cast samples 38Annex H (informative) Comparis

16、on of spheroidal graphite cast iron material designations according to EN 1560 1 and ISO/TR 15931 24 . 39Annex I (informative) Un-notched impact test . 40Annex J (informative) Significant technical changes between this European Standard and the previous edition 42Annex ZA (informative) Relationship

17、between this European Standard and the Essential Requirements of EC Directive 97/23/EC . 44Bibliography . 45Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 1563:2011EN 1563

18、:2011 (E) 3 Foreword This document (EN 1563:2011) has been prepared by Technical Committee CEN/TC 190 “Foundry technology”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement,

19、at the latest by June 2012, and conflicting national standards shall be withdrawn at the latest by June 2012. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or

20、all such patent rights. This document supersedes EN 1563:1997. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). For relationship with EU Directive 97/23/EC, see inf

21、ormative Annex ZA, which is an integral part of this document. Within its programme of work, Technical Committee CEN/TC 190 requested CEN/TC 190/WG 7 “Spheroidal graphite, silicon molybdenum and austempered ductile iron” to revise EN 1563:1997. Annex J provides details of significant technical chang

22、es between this European Standard and the previous edition. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,

23、 Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. Copyright European Committee for Standardization Provided by IHS under lic

24、ense with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 1563:2011EN 1563:2011 (E) 4 Introduction The properties of spheroidal graphite cast irons depend on their structure. Spheroidal graphite cast irons covered by this European Standard are divided in t

25、wo groups: 1) ferritic to pearlitic spheroidal graphite cast irons which were in the previous standard; 2) solid-solution strengthened ferritic spheroidal graphite cast irons which were not in the previous standard. The two groups present specific properties, for example: the ferritic grades of the

26、first group present the highest impact energy; the pearlite containing grades are more suitable for wear resistance applications; the solid-solution strengthened ferritic grades present for an equivalent tensile strength a higher proof strength and a higher elongation than that of the ferritic to pe

27、arlitic grades; a significant property of these solid-solution strengthened ferritic grades is the reduced hardness variation resulting in an improved machinability. The mechanical properties of the material can be evaluated on machined test pieces prepared from: separately cast samples; side-by-sid

28、e cast samples; cast-on samples; samples cut from a casting. The material grade is defined by mechanical properties measured on machined test pieces prepared from cast samples. If hardness or un-notched impact energy are a requirement of the purchaser as being important for the application, then Ann

29、ex C or Annex I provide means for its determination. It is well known that tensile properties and hardness of spheroidal graphite cast irons are interrelated. When considered by the purchaser as being important for the application, both tensile and hardness properties may be specified. Further techn

30、ical data on spheroidal graphite cast irons is given in Annexes A, E and F. In this European Standard a new designation system by number, as established in EN 1560:2011 1, is given. NOTE This designation system by number is based on the structure and rules of EN 10027-2 2 and so corresponds with the

31、 European numbering system for steel and other materials. Some spheroidal graphite cast iron grades can be used for pressure equipment. The permitted material grades of spheroidal graphite cast iron for pressure applications and the conditions for their use are given in specific product or applicati

32、on standards. For the design of pressure equipment, specific design rules apply. Annex ZA gives information relating to the conformance of permitted spheroidal graphite cast iron grades to the Pressure Equipment Directive 97/23/EC. Copyright European Committee for Standardization Provided by IHS und

33、er license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 1563:2011EN 1563:2011 (E) 5 1 Scope This European Standard defines the grades and the corresponding requirements for spheroidal graphite cast irons. This European Standard specifies 2 groups o

34、f spheroidal graphite cast iron grades by a classification based on mechanical properties measured on machined test pieces prepared from cast samples. The first group deals with ferritic to pearlitic grades. The second group deals with solid-solution strengthened ferritic grades. This European Stand

35、ard does not cover technical delivery conditions for iron castings (see EN 1559-1 3 and EN 1559-3 4). This European Standard does not cover all aspects of: ausferritic spheroidal graphite cast irons which are specified in EN 1564 5; low alloyed ferritic spheroidal graphite cast irons which are speci

36、fied in EN 16124 6; austenitic cast irons which are specified in EN 13835 7; spheroidal graphite cast irons used for pipes, fittings and their joints which are the subject of EN 545 8, EN 598 9 and EN 969 10; the grades of spheroidal graphite cast iron as specified in EN 545 which are used for produ

37、cts such as industrial valves, non industrial manually operated shut-off valves and flanges and their joints, which are the subject of the applicable European product standards. 2 Normative references The following referenced documents are indispensable for the application of this document. For date

38、d references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 764-5:2002, Pressure Equipment Part 5: Compliance and Inspection Documentation of Materials EN 10204:2004, Metallic products Types of inspection

39、documents EN ISO 148-1:2010, Metallic materials Charpy impact test Part 1: Test method (ISO 148-1:2009) EN ISO 945-1:2008, Microstructure of cast irons Part 1: Graphite classification by visual analysis (ISO 945-1:2008) EN ISO 6506-1, Metallic materials Brinell hardness test Part 1: Test method (ISO

40、 6506-1) EN ISO 6892-1:2009, Metallic materials Tensile testing Part 1: Method of test at ambient temperature (ISO 6892-1:2009) 3 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1 spheroidal graphite cast iron cast material, iron, carbon and sili

41、con-based, the carbon being present mainly in the form of spheroidal graphite particles NOTE Spheroidal graphite cast iron is also known as ductile iron, and less commonly as nodular iron. Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reprodu

42、ction or networking permitted without license from IHS-,-,-BS EN 1563:2011EN 1563:2011 (E) 6 3.2 ferritic to pearlitic spheroidal graphite cast iron spheroidal graphite cast iron with a matrix containing ferrite or pearlite or a combination of both NOTE Pearlite can be partially or totally replaced

43、by bainite or tempered martensite in grades having higher strength 3.3 solid-solution strengthened ferritic spheroidal graphite cast iron spheroidal graphite cast iron with a matrix mainly consisting of ferrite, solution strengthened mainly by silicon 3.4 graphite spheroidizing treatment operation t

44、hat brings the liquid iron into contact with a substance to produce graphite in the predominantly spheroidal (nodular) form during solidification NOTE This operation is often followed by a second one called inoculation. 3.5 cast sample quantity of material cast to represent the cast material, includ

45、ing separately cast sample, side by side cast sample and cast-on sample 3.6 separately cast sample sample cast in a separate sand mould under representative manufacturing conditions and material grade 3.7 side-by-side cast sample sample cast in the mould alongside the casting, with a joint running s

46、ystem 3.8 cast-on sample sample attached directly to the casting 3.9 relevant wall thickness wall thickness representative of the casting, defined for the determination of the size of the cast samples to which the mechanical properties apply 4 Designation The material shall be designated either by s

47、ymbol or by number as given in Tables 1, 2 or 3. In the case of samples cut from the casting the letter C is added at the end of the designation by symbol. NOTE The comparison of EN 1563 grade designations with the grades from the ISO standard for spheroidal graphite cast iron, ISO 1083:2004 11, is

48、given in Annex H. Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 1563:2011EN 1563:2011 (E) 7 5 Order information The following information shall be supplied by the purchaser: a) the number of this European Standard; b) the designation of the material; c) the relevant wall thickness; d) any special requirements. All req