BS EN 1628-2011 Pedestrian doorsets windows curtain walling grilles and shutters Burglar resistance Test method for the determination of resistance under static loading《行人门具 窗户 幕墙 .pdf

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationBS EN 1628:2011Pedestrian doorsets, windows,curtain walling, grilles andshutters Burglar resistance Test method for thedetermination of resistanceunder static loadingLicensed Cop

2、y: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 14/09/2011 03:17, Uncontrolled Copy, (c) BSIBS EN 1628:2011 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN 1628:2011. It supersedes DD ENV 1628:1999, which is withdrawn.BSI, as a member of CEN, is obliged publish EN 16

3、27, EN 1628, EN 1629 and EN 1630 as British Standards. However, attention is drawn to the fact that, during the development of these European Standards, the UK committee voted against the approval of EN 1627, EN 1628, and EN 1630, and appealed against the ratification of all four standards.This is d

4、ue to the committees belief that the standards do not address all known burglary modus operendi and do not account for lock picking within any of their scopes. Users are to be drawn, in this case, to the existence of PAS 24, which provides enhanced security performance requirements for door assembli

5、es.NOTE: A revision of PAS 24 to include windows will commence in 2011.The UK participation in its preparation was entrusted to Technical Committee B/538, Doors, windows, shutters, hardware and curtain walling.A list of organizations represented on this committee can be obtained on request to its se

6、cretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. BSI 2011ISBN 978 0 580 54355 5ICS 13.310; 91.060.50Compliance with a British Standard cannot confer immunity from legal obligations.This British Standar

7、d was published under the authority of the Standards Policy and Strategy Committee on 30 June 2011.Amendments issued since publicationDate Text affectedLicensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 14/09/2011 03:17, Uncontrolled Copy, (c) BSIBS EN 1628:2011EUROPEAN STANDARD NORME EUROPENNE

8、EUROPISCHE NORM EN 1628 May 2011 ICS 13.310; 91.060.50 Supersedes ENV 1628:1999English Version Pedestrian doorsets, windows, curtain walling, grilles and shutters - Burglar resistance - Test method for the determination of resistance under static loading Blocs-portes pour pitons, fentres, faades rid

9、eaux, grilles et fermetures - Rsistance leffraction - Mthode dessai pour la dtermination de la rsistance la charge statiqueTren, Fenster, Vorhangfassaden, Gitterelemente und Abschlsse - Einbruchhemmung - Prfverfahren fr die Ermittlung der Widerstandsfhigkeit unter statischer Belastung This European

10、Standard was approved by CEN on 2 December 2010. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concer

11、ning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into

12、 its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Irelan

13、d, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17,

14、 B-1000 Brussels 2011 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 1628:2011: ELicensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 14/09/2011 03:17, Uncontrolled Copy, (c) BSIBS EN 1628:2011EN 1628:2011 (E) 2 Contents Page Fo

15、reword . 41 Scope 52 Normative references . 53 Definitions 54 Apparatus 64.1 Test rig . 64.2 Load applicators . 64.3 Hooks . 64.4 Straps . 64.5 Pressure pads . 74.6 Measuring equipment . 74.7 Sub-frame 74.8 Tolerances . 75 Test specimen . 85.1 General . 85.2 Preparation and examination of the test s

16、pecimen . 86 Procedure 96.1 Test room climate . 96.2 General . 96.3 Testing of group 1 and group 2 construction products 96.3.1 Loading points for group 1 and group 2 products 96.3.2 Test procedure for the infill medium retention system (product groups 1 and 2) . 106.3.3 Test procedure for the leaf

17、(product group 1, burglar resistance class 1) . 106.3.4 Test procedure for the leaf (product group 1, burglar resistance classes 2 and higher) 116.3.5 Test procedure for the leaf (product group 2, burglar resistance class 1) . 116.3.6 Test procedure for the leaf (product group 2, burglar resistance

18、classes 2 and higher) 116.4 Expression of results for product groups 1 and 2 116.5 Testing of group 3 construction products . 126.5.1 Loading points 126.5.2 Loading direction 126.5.3 Loading and measurement procedure 126.5.4 Expression of results 136.6 Testing of group 4 construction products . 146.

19、6.1 General . 146.6.2 Resistance of moving element 146.6.3 Resistance of other loading points . 146.6.4 Expression of results 147 Test report . 14Annex A (normative) Test Equipment . 16A.1 Examples for loading points F1 and F3 16A.2 Example of test rig 18A.3 Examples for pressure pads for door sets,

20、 windows and shutters . 19A.4 Examples for pressure pads for door sets, windows and shutters in places where it is necessary to bridge any item of furniture or a lock . 19A.5 Examples for pressure pads for roller shutters . 20A.6 Examples for pressure pads for roller shutters separate test for guide

21、 rails . 20Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 14/09/2011 03:17, Uncontrolled Copy, (c) BSIBS EN 1628:2011EN 1628:2011 (E) 3 A.7 Examples for pressure pads for grilles 21A.8 Examples of loading equipment for sliding doors, double leaf sliding doors, sliding windows and shutters 22

22、A.9 Examples for hooks 23A.10 Gap gauges 24A.11 Examples of mounting arrangements for door sets . 25A.12 Examples of mounting arrangements for windows 27A.13 Examples of mounting arrangements for wing and folding shutters 28A.14 Examples of mounting arrangements for guide rails and roller shutters i

23、nto the test rig 31A.15 Examples of mounting arrangements for grilles into in the test rig 34A.16 Loading points on door sets (load F3 and F2) in resistance class 1 to 6 . 36A.17 Loading points on door sets (load F3) in resistance class 1 to 6 38A.18 Loading points on door sets (load F1 and F3) in r

24、esistance class 1 to 6 . 40A.19 Loading points on door sets (load F3) in resistance class 1 to 6 41A.20 Loading points on door sets (load F3 and F3.a) in resistance class 1 42A.21 Additional loading points on door sets (load F3.a and F3) in resistance class 1 43A.22 Additional loading points on door

25、 sets (load F3, F3.a and F2) in resistance class 1 45A.23 Loading points on windows (loads F1 and F3) in resistance class 1 to 6 46A.24 Additional loading points on windows (load F3.a and F3) in resistance class 1 . 47A.25 Additional loading points on double hinged windows . 48A.26 Additional loadin

26、g points on windows (load F3.a) in resistance class 1 49A.27 Additional loading points on windows (load F3.a and F3) in resistance class 1 . 50A.28 Loading points on windows (loads F1 and F3) in resistance class 1 to 6 51A.29 Loading points on a single leaf shutter (load F3) in resistance class 1 to

27、 6 52A.30 Loading points on a multi leaf shutter (loads F1 and F3) in resistance class 1 to 6 . 53A.31 Loading points on a multi leaf wing shutter (loads F1 and F3) in resistance class 1 to 6 54A.32 Guide rail single test on roller shutters 55A.33 Loading points on roller shutters (load F3) in resis

28、tance class 1 to 6 56A.34 Loading points on roller shutters (load F2) in resistance class 1 to 6 57A.35 Loading points on roller shutters (load F1) in resistance class 1 to 6 58A.36 Loading points on fixed grilles (load F3) in resistance class 1 to 6 59A.37 Loading points on moveable grilles (load F

29、3) in resistance class 1 to 6 60A.38 Loading points on roller grilles (load F3.2) in resistance class 1 to 6 61Annex B (normative) Test sequence for static loading test in resistance classes 1 to 6 . 63Annex C (normative) Dislocation of window hardware against the locking direction 65C.1 General . 6

30、5C.2 Test criteria 65C.3 Test method . 65Bibliography . 67Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 14/09/2011 03:17, Uncontrolled Copy, (c) BSIBS EN 1628:2011EN 1628:2011 (E) 4 Foreword This document (EN 1628:2011) has been prepared by Technical Committee CEN/TC 33 “Doors, windows, shu

31、tters, building hardware and curtain walling”, the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by November 2011, and conflicting national standards shall be

32、 withdrawn at the latest by November 2011. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes ENV 1628:1999. Thi

33、s European Standard is one of a series of standards for burglar resistant pedestrian doorsets, windows, curtain walling, grilles and shutters. The other standards in the series are: EN 1627:2011, Pedestrian doorsets, windows, curtain walling, grilles and shutters Burglar resistance Requirements and

34、classification; EN 1629:2011, Pedestrian doorsets, windows, curtain walling, grilles and shutters Burglar resistance Test method for the determination of resistance under dynamic loading; EN 1630:2011, Pedestrian doorsets, windows, curtain walling, grilles and shutters Burglar resistance Test method

35、 for the determination of resistance to manual burglary attempts. This standard is a revision of, and supersedes ENV 1628:1999. The three other standards in this series are revisions of, and supersede ENV 1627, ENV 1629 and ENV 1630 respectively. This revision incorporates grilles and facades in the

36、 range of application. There are two aspects to the burglar resistance performance of a construction product: their resistance to forced operation and their ability to remain fixed to the building. Due to the limitation of reproducing the fixing methods and the buildings construction in a laboratory

37、 environment this aspect is not fully covered by the standard. This is particularly true with products built into a building. The performance of the fixed part of the product is evaluated using a standard sub frame. It is the manufacturers responsibility to ensure that guidance on the fixing of the

38、product is contained in the mounting instructions and that this guidance is suitable for the burglar resistance class claimed for the product. As with the other referenced standards this specification uses a standard sub frame and the product is mounted according to the manufacturers instructions. T

39、he fixing method to be considered is detailed in Annex A of EN 1627:2011. This test method does not evaluate the performance of the fixing to the building. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this E

40、uropean Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland an

41、d the United Kingdom. Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 14/09/2011 03:17, Uncontrolled Copy, (c) BSIBS EN 1628:2011EN 1628:2011 (E) 5 1 Scope This European Standard specifies a test method for the determination of resistance to static loading in order to assess the burglar resis

42、tant properties of pedestrian door sets, windows, curtain walling, grilles and shutters. It is applicable to the following means of opening: Turning, tilting, folding, turn-tilting, top or bottom hung, sliding (horizontally and vertically) and rolling as well as fixed constructions. This European St

43、andard does not apply to doors, gates and barriers, intended for installation in areas in the reach of persons, and for which the main intended uses are giving safe access for goods and vehicles accompanied or driven by persons in industrial, commercial or residential premises, as covered by EN 1324

44、1-1. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 356:1999, Glass in

45、 building Security glazing Testing and classification of resistance against manual attack EN 1303:2005, Building hardware Cylinders for locks Requirements and test methods EN 1627:2011, Pedestrian doorsets, windows, curtain walling, grilles and shutters Burglar resistance Requirements and classifica

46、tion EN 1630:2011, Pedestrian doorsets, windows, curtain walling, grilles and shutters Burglar resistance Test method for the determination of resistance to manual burglary attempts EN 1906:2010, Building hardware Lever handles and knob furniture Requirements and test methods EN 12195-2, Load restra

47、int assemblies on road vehicles Safety Part 2: Web lashing made from man-made fibres EN 12209:2003, Building hardware Locks and latches Mechanically operated locks, latches and locking plates Requirements and test methods 3 Terms and definitions For the purposes of this document, the terms and defin

48、itions given in EN 1627:2011 and the following apply. 3.1 attack side side of the test specimen defined by the applicant as the side exposed to attack 3.2 test specimen complete, fully functioning construction product as detailed in the scope of this standard 3.3 sub-frame surrounding frame into which the test specimen is mounted in accordance with the manufacturers instructions Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 14/09/2011 03:17, Uncontrolled Copy, (c) BSIBS EN 1628